20448771

Field campaign
Topic
Market area
Brand
Transaction No.
Campaign number
Note
Type
US code
Tyre Pressure Monitoring System warning (ASW 09.01) (SC16/19)
United States E05 Bentley USA and rest America (6E05)
Bentley
2044877/1
EA57
PDI Campaign
Vehicle data
Bentayga
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
4V1* 2017 E
*
*
*
Cha is numbers
Manufacturer Filler Type Filler MY Factory From To
SJA
***
Documents
Document name
master.xml
ZV
*
H
C
000001 013432
Prod from Prod to
Notes
Repair instructions
Technical background
Tyre Pressure Monitoring System (TPMS) could give an instruction to check tire pressures before low tire pressures are detected
Remedy
Apply regional specific re-programing via SVM process
Customer notification
Service measure before delivery
Please make sure all affected vehicles are checked and repaired before delivery to the customer.
If an affected vehicle has already been delivered, please inform the customer straight away by phone about the campaign. Use the information from
the chapter "Technical background". Please make sure the vehicle is checked and repaired during the workshop visit. Write the service measure to be
performed on the workshop order before the customer signs it.
If the campaign was not performed during a workshop visit, inform the customer straight away about the campaign.
Please also inform your new and used car department, so that these vehicles can be checked and repaired straight away and not only before the sale.
Warranty accounting instructions
Warranty Type
790 or 710
Labour Operation Code
01 29 00 02
Damage Service Number EA57
Damage Code
Time
Criteria ID
00 66
20TU
01
Genuine parts
.
Parts supply
.
Parts despatch control
N/A
Repair instructions
Notes
Technical background
Tyre Pressure Monitoring System (TPMS) could give an instruction to check tire pressures before low tire pressures are detected
Check
If the vehicle Is not already listed as repaired in the “Repair history” (ElsaPro), check for the campaign identification mark, blue spot to the under
bonnet charging post cover adjacent to right hand bonnet hinge (see Figure 4), should neither be evident carry out the required work in accordance
with these instructions
Genuine parts
.
Work
1. Ensure a suitable battery charger is correctly connected to the vehicle electrical system for the duration of this procedure
2. Connect the Bentley approved diagnostic tool to the vehicle On Board Diagnostic (OBD) socket. Note: Hardwire connections should be used
between the diagnostic tool and the OBD socket and when connecting broadband to the diagnostic tool
Figure 1
3. Place the ignition key in the remote control key reader and switch on the ignition (see Figure 1)
4. From the diagnostic tool main desktop select Off board Diagnostic Information System
5. Select – Start diagnosis
6. Adopt correct vehicle identification
7. Select guided fault finding to check and clear the vehicle of any fault codes. NOTE: At this time when requested to Make a Target/Actual
comparison do not perform this action select NO
Figure 2
8. Select Special functions (1), Select SVM – Problem related Hardware/Software Update (2), Select Perform test (3) (see Figure 2)
Figure 3
9. At SVM process screen enter (1) the specific SVM code 4V065TPINAR01 and then Adopt (2) (see Figure 3) Note: the I identified with an
underscore in the SVM code is a letter
10. If prompted enter your global user ID and password – follow screen prompt
11. During update a number of coding, adaptions and parameter settings are expected on control module 65-TPMS, follow screen prompts as
directed
12. Once the update program has completed follow the screen prompts to complete the update
13. Use guided fault finding to clear any fault codes created as a result of performing this campaign
Identification
Figure 4
On completion apply a blue campaign completion mark to the under bonnet battery charging post adjacent to the right hand bonnet hinge (see
Figure 4)
Repair instructions
Notes