B16-024
Service Bulletin Details
Public Details for: B16-024
Service bulletin - center console lid will not automatically slide close with release button.
- 2016 -
Models from 2016
2016 ACURA RLX |
Service Bulletin 16-024 May 20, 2016 02412 Version 2 Center Console Lid Will Not Automatically Slide Close with Release Button Supersedes 16-024, dated April 21, 2016, to revise the information highlighted in yellow. AFFECTED VEHICLES Year 2016 2016 Model RLX RLX Sport Hybrid Trim ALL ALL VIN Range JH4KC1F…GC000001 thru JH4KC1F…GC000408 JH4KC2F…GC000001 thru JH4KC2F…GC000005 REVISION SUMMARY Under AFFECTED VEHICLES, VINs were added. SYMPTOM When you press the release button, the center console lid won’t automatically close. POSSIBLE CAUSE There is too much friction in the mechanism to overcome the closure spring force. CORRECTIVE ACTION Replace the center console lid. PARTS INFORMATION Part Name Part Number Quantity Center Console Lid (YR422L (Light Orchid), N-Off White) 83410-TY2-A04ZA 1 Center Console Lid (NH802L (Light Jewel Gray), B-Gray) 83410-TY2-A04ZB 1 Center Console Lid (NH690L (Premium Black), A-Black) 83410-TY2-A04ZC 1 CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Acura automobile dealer. © 2016 American Honda Motor Co., Inc. – All Rights Reserved Page 1 of 4 WARRANTY CLAIM INFORMATION The normal warranty applies. Operation Number Description Flat Rate Time Defect Code Symptom Code Replace center console lid. (YR422L (Light Orchid), N-Off White) 0421A2 Replace center console lid. (NH802L (Light Jewel Gray), B-Gray) 0.3 hr 07403 Replace center console lid. (NH690L (Premium Black), A-Black) Skill Level: Template ID Failed Part Number 16-024N 83410-TY2-A02ZA 16-024P 83410-TY2-A04ZB 16-024Q 83410-TY2-A04ZC 03217 Repair Technician REPAIR PROCEDURE 1. Pull back on the damper arm to release it from the center console lid. 2. Press the upper lock release lever to release this end of the lid. Page 2 of 4 3. Press the lock release button to release the lid, then remove it. 4. Install the new center console lid to the center console as shown, then press the lock release button and maneuver the lid until it clicks into the hole to secure it into place. 5. Press the lower lock release lever until it clicks into place. NOTE: You may need to move the lid back and forth to get the pin to line up with the hole and click into place. Page 3 of 4 6. Insert the damper rod to the console lid until it clicks into place. 7. Make sure the lid opens and slides normally. END Page 4 of 4