TSB150105-081516
Service Bulletin Details
Public Details for: TSB150105-081516
This technical service bulletin announces new aftertreatment selective catalyst reduction (scr) catalyist part numbers and supporting parts. This is an update to a previously submitted communication.
- 9999 -
Models from 9999
9999 CUMMINS ISB4.5 |
9999 CUMMINS ISB6.7 |
9999 CUMMINS ISL9 |
New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 1 of 16 Technical Service Bulletin Number TSB150105 Technical Service Bulletin Subject New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Contents This document announces new aftertreatment Selective Catalyst Reduction (SCR) catalyst part numbers and supporting parts. Product Affected ISB4.5 CM2350 B104 ISB6.7 CM2350 B101 ISB6.7 CM2350 B103 ISL9 CM2350 L101 Aftertreatment SCR Catalyst Part Number Identification For information on identifying the aftertreatment SCR catalyst, see the corresponding Service Manual. Reference Procedure 100-001 in Section E. The aftertreatment SCR catalyst has three part numbers on the canister. The correct aftertreatment SCR catalyst part number taken from the third (or last) position must be used when referencing Table 1 below. See Figure 1 below. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 2 of 16 Figure 1, Part Number Location on Aftertreatment SCR Catalyst Canister. Description of Change Visually, the new aftertreatment SCR catalyst is the same as the obsolete aftertreatment SCR catalyst with the exception of a missing bung for the aftertreatment (SCR) intermediate NH3 sensor that is no longer required. Notice in Figure 2 below that there are only two bungs on the new style aftertreatment SCR catalyst (right), rather than three bungs (left), which will account for the deletion of the aftertreatment SCR intermediate NH3 sensor. This is the only physical difference between the obsolete and new versions of the aftertreatment SCR catalyst. See the cross reference below in Table 1 below to identify the correct aftertreatment SCR catalyst. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 3 of 16 Figure 2, Obsolete SCR Catalyst (left) and New SCR Catalyst (right) Notice in Figure 3 below, the obsolete aftertreatment SCR catalyst will have an aftertreatment SCR intermediate NH3 sensor attached to the sensor table with a threesensor wiring harness (left); whereas with a new aftertreatment SCR catalyst (right), there will be no aftertreatment SCR intermediate NH3 sensor and a two-sensor wiring harness. When installing a new aftertreatment SCR catalyst, see the cross reference below in Table 2 to identify the correct replacement wiring harness. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 4 of 16 Figure 3, Three Sensor Aftertreatment SCR Wiring Harness (left) and Two Sensor Aftertreatment SCR Wiring Harness(right) Figures 4 and 5 provide images to differentiate between the different SCR configurations when determining what engine harness to use. The horizontal and vertical nomenclature describes the orientation of how the SCR is installed in the equipment. The OEM wiring harness connectors are circled in the images; direction of exhaust flow is shown by the arrows. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 5 of 16 Figure 4, Right-hand Vertical SCR (left) / Right-hand Horizontal SCR (right) https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 6 of 16 Figure 5, Left-hand Vertical SCR (left) / Left-hand Horizontal SCR (right) When installing a new aftertreatment SCR catalyst, the Engine Control Module (ECM) calibration must be updated as well. Please see the cross reference table below in Table 3 (ISB) and Table 4 (ISL) below to identify the correct ECM base calibration. Prior to the ECM calibration installation, the new aftertreatment SCR catalyst must be verified, as per Figure 2. When calibrating the ECM, the new control parts list (CPL) and new ECM calibration base code must be recorded on an authorized change label, Part Number 5297400, and installed on the engine near the engine dataplate. Please see the cross reference in Table 3 (ISB) and Table 4 (ISL) below to identify the correct CPL. Reason for Change Product improvement. Service Instructions In the event of an aftertreatment SCR catalyst failure: Replace aftertreatment SCR Catalysts with appropriate part number, see Table 1 below. Reference the Service Manual for the product affected. See Procedure 011-036 Aftertreatment Selective Catalytic Reduction (SCR) Catalyst in Section 11. Remove and discard NH3 sensor. Reference the Service Manual for the product affected. See Procedure 019-479 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 7 of 16 Aftertreatment Selective Catalytic Reduction (SCR) Intermediate NH3 Sensor in Section 19. Replace three-sensor wiring harness with two-sensor wiring harness, see Table 2 below. Update ECM calibration to the latest ECM calibration revision, see Table 3 (ISB) and Table 4 (ISL). Reference the Service Manual for the product affected. See Procedure 019-032 Engine Control Module Calibration Code in Section 19. Order new authorized change label, Part Number 5297400. Fill out authorized change labor sticker with new CPL, new ECM base code, distributor or dealer code, and the date. Campaign number section is to be left blank. Place completed new authorized change label near the engine dataplate. The ISB engine dataplate is located on the valve cover. The ISL engine dataplate is located on the front gear housing. NOTE: When performing this action, there are instances where fault codes will become active. Fault Code 3911: If this fault code occurs, the ECM calibration has not been updated, but the aftertreatment SCR catalyst has been changed. Please verify the ECM calibration is updated, as per Table 3 (ISB) and Table 4 (ISL). NOTE: If the unit already contains a two-bung ECM calibration, the ECM calibration does not need to be updated. Service Parts Availability Table 1, Aftertreatment SCR Catalyst Part Numbers Part Description Obsolete Part Number New Part Number Aftertreatment SCR Catalyst 4328751 4353085 Aftertreatment SCR Catalyst 4328811 4353844 Aftertreatment SCR Catalyst 4328959 4353842 Aftertreatment SCR Catalyst 4329056 4376615 Aftertreatment SCR Catalyst 4329456 4377741 Aftertreatment SCR Catalyst 4329536 4353854 Aftertreatment SCR Catalyst 4329546 4353841 Aftertreatment SCR Catalyst 4329710 4354071 Aftertreatment SCR Catalyst 4329722 4377448 Aftertreatment SCR Catalyst 4330177 4354073 Aftertreatment SCR Catalyst 4330178 4354075 Aftertreatment SCR Catalyst 4352850 4376633 Aftertreatment SCR Catalyst 4352852 4376631 Aftertreatment SCR Catalyst 4353003 4354077 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Aftertreatment SCR Catalyst 4353064 4330159 Aftertreatment SCR Catalyst 4353066 4353840 Aftertreatment SCR Catalyst 4353068 4353843 Aftertreatment SCR Catalyst 4353070 4354052 Aftertreatment SCR Catalyst 4353072 4354062 Aftertreatment SCR Catalyst 4353814 4354069 Aftertreatment SCR Catalyst 4354267 4376731 Aftertreatment SCR Catalyst 4377176 4377454 Aftertreatment SCR Catalyst 5303809 4352984 Aftertreatment SCR Catalyst 5303869 4330154 Aftertreatment SCR Catalyst 5303871 4330155 Aftertreatment SCR Catalyst 5303873 4330156 Aftertreatment SCR Catalyst 5303889 4352986 Aftertreatment SCR Catalyst 5303891 4330157 Aftertreatment SCR Catalyst 5303921 4330158 Aftertreatment SCR Catalyst 5306223 4377737 Aftertreatment SCR Catalyst 5308311 4377017 Aftertreatment SCR Catalyst 5308316 4377013 Aftertreatment SCR Catalyst 5308318 4377009 Aftertreatment SCR Catalyst 5308320 4377011 Aftertreatment SCR Catalyst 5308323 4376930 Aftertreatment SCR Catalyst 5308324 4377747 Aftertreatment SCR Catalyst 5308361 4353819 Aftertreatment SCR Catalyst 5308363 4377007 Aftertreatment SCR Catalyst 5308365 4354130 Aftertreatment SCR Catalyst 5308367 4354134 Aftertreatment SCR Catalyst 5308389 4354138 Aftertreatment SCR Catalyst 5308391 4376603 Aftertreatment SCR Catalyst 5308393 4376593 Aftertreatment SCR Catalyst 5308397 4376625 Aftertreatment SCR Catalyst 5308399 4376645 Aftertreatment SCR Catalyst 5308403 4376641 Aft t t Page 8 of 16 t SCR C t l t https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers 5308407 4376637 Aftertreatment SCR Catalyst 5308410 4376635 Aftertreatment SCR Catalyst 5308411 4376639 Aftertreatment SCR Catalyst 5308415 4354067 Aftertreatment SCR Catalyst 5308441 4354054 Aftertreatment SCR Catalyst 5308445 4376658 Aftertreatment SCR Catalyst 5308456 4376676 Aftertreatment SCR Catalyst 5308458 4376678 Aftertreatment SCR Catalyst 5308458 4376678 Aftertreatment SCR Catalyst 5308462 4354311 Aftertreatment SCR Catalyst 5308464 4354042 Aftertreatment SCR Catalyst 5308470 4354044 Aftertreatment SCR Catalyst 5308472 4354040 Aftertreatment SCR Catalyst 5308474 4376666 Aftertreatment SCR Catalyst 5308476 4376664 Aftertreatment SCR Catalyst 5308695 4377745 Aftertreatment SCR Catalyst 5308697 4377743 Aftertreatment SCR Catalyst 5308701 4377440 Aftertreatment SCR Catalyst 5308710 4353839 Aftertreatment SCR Catalyst 5308711 4393714 Aftertreatment SCR Catalyst 5308758 4376670 Aftertreatment SCR Catalyst 5308761 4376660 Aftertreatment SCR Catalyst 5309245 4354321 Aftertreatment SCR Catalyst 5309328 4376660 Aftertreatment SCR Catalyst 5309342 4376619 Aftertreatment SCR Catalyst 5309550 4376599 Aftertreatment SCR Catalyst 5309899 4377021 Aftertreatment SCR Catalyst 5309908 4376609 Aftertreatment SCR Catalyst 5309980 4377023 Aftertreatment SCR Catalyst 5310300 4354313 Aftertreatment SCR Catalyst 5310476 4354319 Aftertreatment SCR Catalyst 5310493 4377019 Aft t t Page 9 of 16 t SCR C t l t https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 10 of 16 5311256 4377015 Aftertreatment SCR Catalyst 5311480 4376605 Aftertreatment SCR Catalyst 5311709 4376575 Aftertreatment SCR Catalyst 5311860 4354315 Aftertreatment SCR Catalyst 5311936 4376623 Aftertreatment SCR Catalyst 5311940 4376577 Aftertreatment SCR Catalyst 5312117 4377749 Aftertreatment SCR Catalyst 5312177 4377751 Aftertreatment SCR Catalyst 5313092 4377739 Aftertreatment SCR Catalyst 5313571 4376597 Table 2, Wiring Harness Part Numbers Part Description Previous 3-Sensor Wiring Harness New 2-Sensor Wiring Harness 12V Right Hand Horizontal Harness 5301897 or 4377399 4377407 12V Left Hand Horizontal Harness 5301985 or 4377400 4377408 24V Right Hand Horizontal Harness 5301987 or 4377401 4377411 24V Left Hand Horizontal Harness 5301899 or 4377402 4377412 12V Right Hand Vertical Harness 5304060 or 4377403 4377409 12V Left Hand Vertical Harness 5304062 or 4377404 4377410 24V Right Hand Vertical Harness 5304061 or 4377405 4377413 24V Left Hand Vertical Harness 5304331 or 4377406 4377414 Table 3, ISB (All Displacements) CM2350 (B101, B103, and B104) ECM Base Calibrations and CPLs Existing ECM Base Code New ECM Base Code New CPL DT90082 DT90443 CPL4784 DT90083 DT90447 CPL4786 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 11 of 16 DT90084 DT90445 CPL4784 DT90085 DT90355 CPL4782 DT90086 DT90352 CPL4782 DT90087 DT90353 CPL4782 DT90008 DT90357 CPL4783 DT90015 DT90358 CPL4783 DT90043 DT90359 CPL4783 DT90044 DT90360 CPL4783 DT90059 DT90361 CPL4783 DT90009 DT90364 CPL4784 DT90016 DT90365 CPL4784 DT90001 DT90366 CPL4783 DT90017 DT90367 CPL4783 DT90045 DT90368 CPL4783 DT90046 DT90369 CPL4783 DT90060 DT90370 CPL4783 DT90002 DT90373 CPL4784 DT90018 DT90374 CPL4784 DT90019 DT90384 CPL4783 DT90020 DT90385 CPL4783 DT90047 DT90386 CPL4783 DT90048 DT90387 CPL4783 DT90061 DT90388 CPL4783 DT90021 DT90391 CPL4784 DT90022 DT90392 CPL4784 DT90023 DT90393 CPL4783 DT90024 DT90394 CPL4783 DT90049 DT90395 CPL4783 DT90050 DT90396 CPL4783 DT90062 DT90397 CPL4783 DT90025 DT90400 CPL4784 DT90026 DT90401 CPL4784 DT90003 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 12 of 16 DT90402 CPL4783 DT90011 DT90403 CPL4783 DT90027 DT90404 CPL4783 DT90051 DT90405 CPL4783 DT90052 DT90406 CPL4783 DT90063 DT90407 CPL4783 DT90075 DT90408 CPL4783 DT90004 DT90411 CPL4784 DT90028 DT90412 CPL4784 DT90005 DT90413 CPL4785 DT90012 DT90414 CPL4785 DT90029 DT90415 CPL4785 DT90053 DT90416 CPL4785 DT90054 DT90417 CPL4785 DT90064 DT90418 CPL4785 DT90006 DT90419 CPL4786 DT90030 DT90420 CPL4786 DT90031 DT90421 CPL4785 DT90032 DT90422 CPL4785 DT90033 DT90423 CPL4785 DT90055 DT90424 CPL4785 DT90056 DT90425 CPL4785 DT90065 DT90426 CPL4785 DT90034 DT90427 CPL4786 DT90035 DT90428 CPL4786 DT90036 DT90429 CPL4785 DT90037 DT90430 CPL4785 DT90038 DT90431 CPL4785 DT90057 DT90432 CPL4785 DT90058 DT90433 CPL4785 DT90066 DT90434 CPL4785 DT90039 DT90435 CPL4785 DT90040 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 13 of 16 DT90436 CPL4785 DT90041 DT90437 CPL4786 DT90076 DT90438 CPL4786 DT90007 DT90439 CPL4785 DT90042 DT90440 CPL4785 DT90013 DT90441 CPL4786 DT90077 DT90442 CPL4786 DT90164 DT90362 CPL4783 DT90174 DT90363 CPL4783 DT90161 DT90371 CPL4783 DT90175 DT90372 CPL4783 DT90162 DT90389 CPL4783 DT90176 DT90390 CPL4783 DT90163 DT90398 CPL4783 DT90177 DT90399 CPL4783 DT90165 DT90409 CPL4783 DT90178 DT90410 CPL4783 DT90166 DT90375 CPL4783 DT90167 DT90376 CPL4783 DT90168 DT90377 CPL4783 DT90169 DT90378 CPL4783 DT90170 DT90379 CPL4783 DT90171 DT90380 CPL4783 DT90172 DT90382 CPL4784 DT90173 DT90383 CPL4784 DT90014 DT90354 CPL4782 DT90081 DT90356 CPL4782 DT90078 DT90444 CPL4784 DT90079 DT90448 CPL4786 DT90080 DT90446 CPL4784 Table 4, ISL9 CM2350 L101 ECM Base Calibrations and CPLs https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 14 of 16 Existing ECM Base Code New ECM Base Code New CPL EB90001 EB90192 CPL4779 EB90002 EB90193 CPL4779 EB90031 EB90194 CPL4779 EB90042 EB90195 CPL4779 EB90023 EB90196 CPL4779 EB90024 EB90197 CPL4779 EB90032 EB90198 CPL4779 EB90043 EB90199 CPL4779 EB90051 EB90207 CPL4779 EB90005 EB90203 CPL4779 EB90006 EB90204 CPL4779 EB90033 EB90205 CPL4779 EB90044 EB90206 CPL4779 EB90007 EB90213 CPL4780 EB90008 EB90214 CPL4780 EB90034 EB90215 CPL4780 EB90045 EB90216 CPL4780 EB90010 EB90221 CPL4781 EB90009 EB90220 CPL4781 EB90052 EB90218 CPL4781 EB90014 EB90232 CPL4781 EB90013 EB90231 CPL4781 EB90025 EB90200 CPL4779 EB90026 EB90201 CPL4779 EB90035 EB90239 CPL4779 EB90046 EB90240 CPL4779 EB90015 EB90209 CPL4780 EB90016 EB90210 CPL4780 EB90036 EB90211 CPL4780 EB90047 EB90212 CPL4780 EB90027 EB90222 CPL4780 EB90028 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers Page 15 of 16 EB90223 CPL4780 EB90037 EB90224 CPL4780 EB90050 EB90225 CPL4780 EB90017 EB90227 CPL4780 EB90018 EB90228 CPL4780 EB90038 EB90229 CPL4780 EB90048 EB90230 CPL4780 EB90019 EB90233 CPL4780 EB90020 EB90234 CPL4780 EB90039 EB90235 CPL4780 EB90021 EB90237 CPL4780 EB90022 EB90238 CPL4780 EB90029 EB90241 CPL4779 EB90030 EB90242 CPL4779 EB90041 EB90243 CPL4779 EB90049 EB90202 CPL4779 EB90149 EB90217 CPL4780 EB90150 EB90226 CPL4780 EB90003 EB90208 CPL4779 EB90012 EB90219 CPL4781 Part Structure The new aftertreatment SCR catalyst is not backward compatible. The existing aftertreatment SCR catalyst part numbers have been obsoleted and superseded by the new aftertreatment SCR catalyst part numbers. Part Disposition Obsolete part numbers in stock should not be used. Obsolete part numbers in stock should be returned for reimbursement. Document History Date 2015-6-26 2015-7-9 Details Module Created Non-Product Problem Solving (PPS) https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016 New Aftertreatment Selective Catalyst Reduction (SCR) Catalyst Part Numbers 2015-10-7 2016-3-8 2016-5-9 2016-6-13 2016-7-5 2016-8-15 Page 16 of 16 Removed statement, "The proper two-sensor wiring harness, see Table 2 below, must also be installed to prevent Fault Code 3911 from setting." as it does not apply. Also inserted EB90232 and EB90231 in the correct rows. Added Aftertreatment SCR Catalyst Obsolete Part Number 5308711 and New Part Number 4393714 to Table 1. Switched EB90220 and EB90221 in Table 4. Added Figures 3 and 4. Added part numbers starting with 4377* in Table 2 column labeled "Previous 3-Sensor Wiring Harness". Added note. Updated existing ECM base codes in Table 4. Added Aftertreatment SCR Catalyst Part Number Identification section. Last Modified: 19-Aug-2016 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150105.html 8/31/2016