TSB140060-050814
Service Bulletin Details
Public Details for: TSB140060-050814
This technical service bulletin discribes the verification and resolution of fault codes 155 and/or 2964 due to intake manifold temperature sensor failures with a certain date code range exhibiting a high rate of early life failures.
- 9999 -
Models from 9999
9999 CUMMINS B67G |
9999 CUMMINS C8.3 G |
9999 CUMMINS ISB5.9 G |
9999 CUMMINS ISB6.7 |
9999 CUMMINS ISL9G |
9999 CUMMINS WESTPORT ISX12 G |
Intake Manifold Temperature Sensor Causing Fault Codes 155 and/or 2964 Technical Service Bulletin Number TSB140060 Revision Level Date Page 1 of 4 Group Number Technical Service Bulletin Subject Intake Manifold Temperature Sensor Causing Fault Codes 155 and/or 2964 Issue Cummins® Part Number 4921483 intake manifold temperature sensors with a date code between 23 Jan 2014 and 01 May 2014 exhibit a high rate of early life failure causing Fault Codes 155 and/or 2964 to become active. Sensor date codes are in YDDDS format as shown below in Figure 1. Affected sensors have a date code between 4023x and 4121x including those two dates, where “x” represents any shift A, B, or C. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140060.html 6/2/2014 Intake Manifold Temperature Sensor Causing Fault Codes 155 and/or 2964 Page 2 of 4 Figure 1 Screening and certification of Cummins® Part Number 4921483 intake manifold temperature sensors within the affected range began 01 May 2014. Certified parts are marked with two dark-colored dots on the sensor connector body as shown below in Figure 2. On unpainted parts, this marking can easily be identified. On painted engines, however, it may be necessary to carefully remove the paint from this area of the sensor to inspect for certification marking. Other markings in other locations do not indicate a certified sensor. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140060.html 6/2/2014 Intake Manifold Temperature Sensor Causing Fault Codes 155 and/or 2964 Page 3 of 4 Figure 2 Verification If Fault Codes 155 and/or 2964 are logged: z z Verify that the sensor date code is between 23 Jan 2014 and 01 May 2014. Verify that the sensor is not a certified part. Resolution Replace the intake manifold temperature sensor with either a certified part identified by two dark-colored dots marked on the sensor body as shown in Figure 2, or a part produced with a date code later than 01 May 2014 (4121x where “x” represents any shift A, B, or C). Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Document History https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140060.html 6/2/2014 Intake Manifold Temperature Sensor Causing Fault Codes 155 and/or 2964 Date 2014-5-8 Page 4 of 4 Details Module Created Last Modified: 21-May-2014 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140060.html 6/2/2014