TSB160093-090116

Service Bulletin Details

Public Details for: TSB160093-090116

This technical service bulletin describes the verification and resolution of fault code 3748 resulting from an aftertreatment intake nox sensor malfunction and incorrrect engine control module (ecm) calibration tuning on certain engines.


- 9999 -

Aftertreatment Intake NOx Sensor Malfunction and Incorrect Engine Control Module (E...
Page 1 of 3
Technical Service Bulletin Number
TSB160093
Technical Service Bulletin
Subject
Aftertreatment Intake NOx Sensor Malfunction and Incorrect Engine Control Module (ECM)
Calibration Tuning Resulting in Fault Code 3748
Warranty Statement
The information in this document has no effect on present warranty coverage or repair
practices, nor does it authorize TRP or Campaign actions.
Contents
Product Affected


ISX12 CM2350 X102
ISX15 CM2350 X101
Issue
Symptom:

Fault Code 3748
Root Cause:

Aftertreatment intake NOx sensor internal heater degradation.
Verification

Verify build date of aftertreatment intake NOx sensor. See Figure 1 below for
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2016/tsb160093.html
10/3/2016
Aftertreatment Intake NOx Sensor Malfunction and Incorrect Engine Control Module (E...

Page 2 of 3
aftertreatment intake NOx sensor build date location.
If build date of aftertreatment intake NOx sensor is prior to August 2014, see Resolution
section below.
Figure 1, Aftertreatment Intake NOx Sensor Base Plate with Build Date (YYMMDD)
Highlighted.


Verify the engine control module (ECM) calibration code has a revision date of August
2016 or later.
If ECM calibration code has a revision date prior to August 2016, see the Resolution
section below.
Resolution


If aftertreatment intake NOx sensor has a build date prior to August 2014, replace the
aftertreatment intake NOx sensor. See the corresponding Service Manual. Reference
Procedure 019-463 in Section 19.
If ECM calibration code has a revision date prior to August 2016, calibrate ECM. See the
corresponding Service Manual. Reference Procedure 019-032 in Section 19.
Document History
Date
2016-9-1
Details
Module Created
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2016/tsb160093.html
10/3/2016
Aftertreatment Intake NOx Sensor Malfunction and Incorrect Engine Control Module (E...
Page 3 of 3
Last Modified: 02-Sep-2016
Copyright © 2000-2010 Cummins Inc. All rights reserved.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2016/tsb160093.html
10/3/2016


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.