TSB150153-091515
Service Bulletin Details
Public Details for: TSB150153-091515
This techical service bulletin describes the verification and resolution of fault codes 3314, 3317, 3319, 3146 or 4518 caused by an aftertreatment exhaust gas temperature sensor malfunction.
- 9999 -
Fault Code 3314, 3317, 3319, 3146 or 4518 Caused by Aftertreatment Exhaust Gas Temp... Page 1 of 4 Technical Service Bulletin Number TSB150153 Technical Service Bulletin Subject Fault Code 3314, 3317, 3319, 3146 or 4518 Caused by Aftertreatment Exhaust Gas Temperature Sensor Malfunction Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Contents Product Affected ISB6.7 CM2350 B101 ISL9 CM2350 L101 ISX12 CM2350 X102 ISX15 CM2350 X101 Issue The malfunction of the aftertreatment selective catalytic reduction (SCR) exhaust gas temperature sensor and aftertreatment diesel particulate filter (DPF) exhaust gas temperature sensor have been observed. The malfunction of the aftertreatment SCR exhaust gas temperature sensor is associated with Fault Code 3146 and 4518. The malfunction of the aftertreatment DPF exhaust gas temperature sensor is associated with Fault Code 3314, 3317, and 3319. The cause of the malfunction has been determined to be the inconsistent frequency between https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150153.html 10/5/2015 Fault Code 3314, 3317, 3319, 3146 or 4518 Caused by Aftertreatment Exhaust Gas Temp... Page 2 of 4 the application specific integrated circuit and the microprocessor in the aftertreatment exhaust gas temperature sensor module. A new software for the aftertreatment SCR exhaust gas temperature sensor and aftertreatment DPF exhaust gas temperature sensor has been developed to remedy the issue. Exhaust gas temperature sensors with the updated software can only be identified by using the inspection criteria found below in the resolution section. See Table 1 below Resolution If the aftertreatment SCR exhaust gas temperature sensor or the aftertreatment DPF exhaust gas temperature sensor requires replacement, the new aftertreatment exhaust gas temperature sensor must be inspected prior to installation. See Table 1 below. Table 1, Aftertreatment Exhaust Gas Temperature Sensor Inspection Criteria Part Aftertreatment Exhaust Gas Temperature Sensor 1See Date Code On Sensor Body1 Marking on Hexagon Nuts2 Action 20150730 and before No marking Do not use 20150730 and before White half circle and a pink line OK for use 20150731 and after No marking or two parallel white bars OK for use Figure 1 Below. 2See Figure 2 Below. https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150153.html 10/5/2015 Fault Code 3314, 3317, 3319, 3146 or 4518 Caused by Aftertreatment Exhaust Gas Temp... Page 3 of 4 Figure 1, Date Code Location on the Aftertreatment Exhaust Gas Temperature Sensor https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150153.html 10/5/2015 Fault Code 3314, 3317, 3319, 3146 or 4518 Caused by Aftertreatment Exhaust Gas Temp... Page 4 of 4 Figure 2, Marking on the Hexagon Nuts Part Inventory Action In stock parts are affected. See Parts Alert MDC-012-15 for details. Document History Date 2015-9-15 Details Module Created Last Modified: 28-Sep-2015 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2015/tsb150153.html 10/5/2015