TSB140159-110514
Service Bulletin Details
Public Details for: TSB140159-110514
This technical service bulletin describes the verification and resolution of fault codes 1139, 1141, 1142, 1143, 1144 or 1145 caused by fuel pump inlet banjo sealing washer debris.
- 9999 -
Models from 9999
9999 CUMMINS ISX12 |
9999 CUMMINS ISX15 |
ISX15 / QSX15 CM2250 and ISX12 / QSX12 CM2250 Engines have Fault Codes 1139, ... Page 1 of 2 Technical Service Bulletin Number TSB140159 Technical Service Bulletin Subject ISX15 / QSX15 CM2250 and ISX12 / QSX12 CM2250 Engines have Fault Codes 1139, 1141, 1142, 1143, 1144, or 1145 caused by Fuel Pump Inlet Banjo Sealing Washer Debris Issue Engines have returned after previous repair with injector fault codes 1139, 1141, 1142, 1143, 1144, or 1145. The root cause of these fault codes is debris from the fuel pump inlet banjo sealing washer, Part Number 3963988 or 3963991, blocking the fuel returned from the fuel pump head. The most common occurrences have been noted with the following campaigns. C1555 ISX15 CM2250 Fuel Pump Barrel/Plunger and Tappet Campaign C1556 ISX12 CM2250 Fuel Pump Barrel/Plunger and Tappet Campaign Verification It is critical that fuel system clean care is followed during removal and installation of the fuel supply line. The presence of debris can not be verified after it is introduced. The location where the debris accumulates is not visible during service. Resolution When opening the fuel system, clean and inspect all components thoroughly. When removing the fuel supply line from the fuel filter outlet and the high-pressure fuel pump, discard the sealing washers as indicated in the service procedure. Before reinstalling the fuel supply line to the fuel filter outlet and the high-pressure fuel pump, clean the fuel supply line banjo fitting with contact cleaner to flush any debris that may have accumulated. Replace the fuel pump inlet banjo sealing washers and install the fuel supply line. See Procedure 006-024 in Section 6 of the appropriate service manual. https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140159.html 12/1/2014 ISX15 / QSX15 CM2250 and ISX12 / QSX12 CM2250 Engines have Fault Codes 1139, ... Page 2 of 2 Table 1, Part Number Information Engine Fuel Pump Inlet Banjo Sealing Washer Part Number Quantity ISX15 / QSX15 CM2250 3963988 2 ISX12 / QSX12 CM2250 3963991 2 Figure 1, Fuel Pump Inlet Banjo Sealing Washer Debris Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Document History Date 2014-11-5 Details Module Created Last Modified: 12-Nov-2014 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://qsol2.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140159.html 12/1/2014