A20167420433582

Service Bulletin Details

Public Details for: A20167420433582

This technical service bulletin informs the reader that there is a pending service solution (pss) for mil on with dtc P046100 in vehicles with v8 engines.


- 2016 - 2015 - 2014 - 2013 -

Technical Service Bulletin
Audi
PSS 20 MIL on (DTC P046100 - Fuel level sensor, circuit range/performance), 4.0L and 4.2L TFSI
20 16 74 2043358/2 July 22, 2016. Supersedes Technical Service Bulletin Group 20 number 16-63 dated April 7,
2016 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, A7, AS
2014 - 2016
All
4.0L engine
RS5,
RS 5 Cabriolet
2013 - 2015
All
4.2L engine
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised header data (Corrected Elsa display error)
1
4/7/2016
Initial publication
In vehicles with V8 engines (4.0L and 4.2L) only:
•
MIL on.
•
DTC P046100 (Fuel level sensor, circuit range/performance) is stored in the engine control module (ECM),
J623 (address word 01).
When:
Normal driving conditions, city or highway.
Speed:
Any speed
Temperature:
Not applicable
DTC:
P046100
Technical Background
Not applicable.
Production Solution
Not applicable.
Page 1 of2
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Service
1. Explain to the customer that a solution is forthcoming and that no repairs are necessary at this point. Do not
replace any components for this condition since this will not resolve the customer's concern. Clear the OTC
and release the vehicle.
2. Create a PSS record in the PSS application via the Pending Service Solutions link in AccessAudi (under
Related Links»Service), or through the Technical Assistance page in Elsa.
Warranty
Claim Type:
1EB
Service Number:
DADP
Damage Code:
0010
Diagnostic Time: Check and clear fault
0132 0000
20TU
Road test prior to service procedure
No allowance OTU
Road test after service procedure
No allowance OTU
Technical diagnosis at dealer's discretion.
(Refer to Section 2.2 of the Audi Warranty Policies and Procedures Manual and Audi
Warranty Online/Resource Center for DADP allowance details.)
Claim Comment:
As per PSS TSB #2043358/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2043358) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
Page 2 of2
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.