PS382

SUBJECT:
GROUP
General
MODEL
Multiple Models
NUMBER
PS382
DATE
March 2015
STOP LAMP SWITCH IDENTIFICATION MATRIX (SC098)
KMA has received a number of incorrect Warranty return parts related to campaign SC098 and
has determined that at times dealer staff may have difficulty in quickly and easily identifying the
correct switches while ordering parts, preparing to perform the Stop Lamp Replacement or
while preparing to return replaced switches to KMA (in case of an existing Mandatory Part
Return (MPR) request). To facilitate faster and easier identification of the correct parts, a
picture guide as shown on Page 2 is provided. The guide’s content was purposely formatted to
fit on one page so it can be easily printed and kept on or near a workstation, parts counter or
tool box.
Also note the following:
Prior to installation: always confirm that the switch is of the correct color, type and P/N.
Always check the EPC for possible references to a campaign, while looking up the P/N for a
certain vehicle. If applicable, use the EPC reference to a campaign number as a guide to the
correct part application. If necessary, review the campaign document (TSB).
If a part that was previously installed during a campaign (e.g. SC098) ever needs to be
replaced, replace it ONLY with the correct P/N, as specified in the (campaign) TSB.
During installation: after the switch is correctly adjusted, ensure it is properly secured by
applying the correct torque (5.8 ~ 7.2 lb-ft) to the mounting nuts.
Warranty Return Parts: under certain circumstances, an MPR (Mandatory Part Return)
request may be generated for campaign or service action repair parts. Prior to any disposal of
campaign or service action parts, dealers should first confirm that no MPR request exists for
such parts, to avoid warranty claim chargebacks.
Dealers should exercise care in returning only the exact part as removed from the specific
vehicle during the repair if such part is the subject of an MPR. Return of the exact part as
replaced during a specific warranty repair is critical in supporting KMA’s ongoing efforts to
inspect replaced parts for quality and durability. The inadvertent return of the wrong part (or of
the same part but from another vehicle) will result in investigative delays and potential
warranty claim chargebacks to the dealer.
A chargeback related to MPR or Core Parts Returns may also occur if an incorrect P/N is
returned or if a part is received without the proper required paperwork
For additional details/information about part return policies, please refer to Warranty Bulletin
2015-02
Page 1 of 2
Stop Lamp Switch Identification Matrix (SC098):
Blue
Blue
Gray
93810 3SR0AQQK
2011MY Optima (TF)
(w/flange nuts)
93810 4DRWBQQK
2007~2009MY Sedona (VQ)
w/Adjustable Pedal
(Includes ground wire)
93810 3KRWBQQK
2007~2009MY Sedona (VQ)
Non-Adjustable Pedal
2009MY Borrego (HM)
Non-Adjustable Pedal
(Includes ground wire)
Blue
Gray
Gray
93810 3KRWAQQK
2009~2011MY Sedona (VQ)
w/Non-Adjustable Pedal
2007~2010MY Rondo (UN)
(Includes ground wire)
Blue
93810 4DR0BQQK
2010MY Soul (AM)
93810 3KR0AQQK
2010~2011MY Sportage (SL)
2011~2012MY Sorento (XMa)
2010MYForte (TD)
93810 3KR0BQQK
2007~2009MY Amanti (GH)
2007~2009MY Sorento (BL)
2009MY Borrego (HM)
w/Adjustable Pedal
Gray
93810 4DR0AQQK
2007~2010MY Sportage (KM)
2007~2010MY Optima (MG)
2010~2011 Soul (AM)
2009~2011MY Sedona (VQ)
w/Adjustable Pedal
Ref: TSB SC098 / PS382
Page 2 of 2
Never install a stop lamp
switch with the “INFAC” logo
stamped on the body in any
of the vehicles covered by
TSB SC098