01-013-16-3202

Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
© 2016 Mazda Motor of America, Inc.
Subject:
Bulletin No:
01-013/16
Last Issued:
05/19/2016
ACCELERATOR PEDAL HINGE BROKEN AT BASE
MULTI-MODEL - ACCELERATOR PEDAL HINGE BROKEN AT BASE
APPLICABLE MODEL(S)/VINS
NOTE: Use GEPC to identify accelerator pedal part number (GHK3-41-600E or GHP9-41-600F) to determine
applicable table below.
Vehicles With Kick Down Switch (GHK3-41-600E)
Year
Model
VINs Lower Than
Produced Before
CX-3
JM1 DK ****** 127867
December 07, 2015
CX-5
JM3 KE ****** 750914
December 07, 2015
Mazda2
3MD DJ ****** 106755
February 17, 2016
Mazda3 Japan built
JM1 BM ****** 312477
December 07, 2015
Mazda3 Mexico built
3MZ BM ****** 288404
February 17, 2016
Mazda6
JM1 GJ ****** 462664
December 07, 2015
2016
Vehicles Without Kick Down Switch (GHP9-41-600F)
Year
Model
VINs Lower Than
Produced Before
CX-3
JM1 DK ****** 132031
January 12, 2016
CX-5
JM3 KE ****** 763234
January 12, 2016
Mazda2
3MD DJ ****** 107151
March 03, 2016
Mazda3 Japan built
JM1 BM ****** 323107
January 12, 2016
Mazda3 Mexico built
3MZ BM ****** 289726
March 03, 2016
Mazda6
JM1 GJ ****** 467333
January 12, 2016
2016
Page 1 of 3
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
Bulletin No: 01-013/16
Last Issued: 05/19/2016
© 2016 Mazda Motor of America, Inc.
DESCRIPTION
Some vehicles may exhibit the accelerator pedal hinge separating from the base in cold temperatures below 32
degrees Fahrenheit (0 degrees Celsius).
The accelerator pedal has been changed to increase durability.
Accelerator pedal hinge
Pedal separates from the base
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
2. Replace the accelerator pedal. Refer to MS3 online Workshop Manual section 01-13:
• CX-3 - ACCELERATOR PEDAL REMOVAL/INSTALLATION
• CX-5 - ACCELERATOR PEDAL REMOVAL/INSTALLATION
• Mazda2 - ACCELERATOR PEDAL REMOVAL/INSTALLATION
• Mazda3 - ACCELERATOR PEDAL REMOVAL/INSTALLATION
• Mazda6 - ACCELERATOR PEDAL REMOVAL/INSTALLATION
3. Verify repair.
Page 2 of 3
Bulletin No: 01-013/16
Last Issued: 05/19/2016
© 2016 Mazda Motor of America, Inc.
PART(S) INFORMATION
Part Number
Description
Qty.
Notes
GHK3-41-600E
PEDAL,ACCEL
1
A/T with kick down switch
GHP9-41-600F
PEDAL,ACCEL
1
M/T, A/T without kick down switch
WARRANTY INFORMATION
NOTE:
•
•
This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
This repair will be covered under:
- Mazda’s New Vehicle Limited Warranty term.
- California Emission Performance Warranty - where applicable.
•
•
- Partial Zero Emissions Warranty - where applicable.
This TSB can be performed by D329 Mazda Certified Lube Technicians.
Additional diagnostic time cannot be claimed for this repair.
Warranty Type
A
Symptom Code
92
Damage Code
9A
Part Number Main Cause
Quantity
Operation Number / Labor Hours:
TSB can be performed by D329 Mazda
Certified Lube Technicians:
GHK3-41-600E
GHP9-41-600F
1
1
XXL9SXRX / 0.2 Hrs.
XXM3KXRX / 0.2 Hrs.
Yes
Yes
Page 3 of 3