2016 Mazda MAZDA2Mazda Mazda2 2016

Vehicle Details: Recalls, Fuel Economy, Emissions, Decoded VIN Details, Service Bulletins

Mazda Logo

Below you will find all available information on the 2016 Mazda MAZDA2, manufacturered by Mazda Motor Manufacturing De Mexico S.a. De C.v..
The vehicle is described as a Front-Wheel Drive Compact Cars .

ManufacturerKnown WMI(s)Fuel Type
Mazda3MD JM1 Regular
City MPGHighway MPGCO2 emissions
31 - 33 MPG40 - 41 MPG245 - 257 g/mile
Mazda VIN Decoder

Use the box here to look up VINs from Mazda as well as other manufacturers

#
Frequently Asked Questions
  • What is the MPG of a 2016 Mazda MAZDA2?
     - The 2016 Mazda MAZDA2 has an EPA estimated city efficiency of 31 - 33 MPG and an estimated highway efficiency of 40 - 41 MPG.
  • What is the fuse box diagram for the 2016 Mazda MAZDA2?
     - Fuse box diagrams for the 2016 Mazda MAZDA2 can be found here
  • What is the annual fuel cost for the 2016 Mazda MAZDA2?
     - EPA estimated annual fuel cost for the 2016 Mazda MAZDA2 is $1600.
  • Where is the 2016 Mazda MAZDA2 produced?
     - The 2016 Mazda MAZDA2 is produced in Guanajuato Salamanca, Mexico.
  • Are there recalls for the 2016 Mazda MAZDA2?
     - There are 4 recall(s) for the 2016 Mazda MAZDA2, additional information is below.
NHTSA Mandated Recalls

  • Recall R/2018/087 [UK]: Software error can cause engine to fail

  • Recall R/2017/203 [UK]: Brake hose retaining clip may fail.

  • Recall R/2018/017 [UK]: Handbrake may disengage unexpectedly

  • Recall 2017120 [Canada]: Label

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
NHTSA Submitted Mechanical & Emissions Details

  • Manual 6-spd Front-Wheel Drive 2

    Description Data
    Engine cylinders4
    Engine displacement in liters1.5
    Engine descriptor; see fueleconomy.gov detailsSIDI
    TransmissionManual 6-spd
    You save/spend over 5 years compared to an average car ($). savings are positive; a greater amount spent yields a negative number. for dual fuel vehicles, this is the cost savings for gasoline1750
    Description Data
    Annual petroleum consumption in barrels for fuel type 18.75029
    City mpg for fuel type 1,31
    Unrounded city mpg for fuel type 1,30.9432
    Tailpipe co2 in grams/mile for fuel type 1257
    Combined mpg for fuel type 1,34
    Unrounded combined mpg for fuel type 1,34.4622
    Engine cylinders4
    Engine displacement in liters1.5
    Drive axle typeFront-Wheel Drive
    EPA model type index7
    Engine descriptor; see fueleconomy.gov detailsSIDI
    EPA fuel economy score (-1 = not available)8
    Annual fuel cost for fuel type 1 ($)1600
    Fuel type with fuel type 1 and fuel type 2 (if applicable)Regular
    Fuel type 1. for single fuel vehicles, this will be the only fuel. for dual fuel vehicles, this will be the conventional fuel.Regular Gasoline
    EPA ghg score (-1 = not available)8
    Highway mpg for fuel type 1,40
    Unrounded highway mpg for fuel type 1,40.0257
    Hatchback luggage volume (cubic feet)16
    Hatchback passenger volume (cubic feet)87
    Vehicle record id36127
    Model name (carline)2
    Has my mpg data; see yourmpgvehicle and yourmpgdrivervehicleY
    If true, this vehicle operates on a blend of gasoline and electricity in charge depleting modefalse
    TransmissionManual 6-spd
    Unadjusted city mpg for fuel type 141.1
    Unadjusted highway mpg for fuel type 159.4
    EPA vehicle size classCompact Cars
    You save/spend over 5 years compared to an average car ($). savings are positive; a greater amount spent yields a negative number. for dual fuel vehicles, this is the cost savings for gasoline1750
    3-character manufacturer codeTKX
    Date the vehicle record was created (iso 8601 format)Tue Apr 07 00:00:00 EDT 2015
    Date the vehicle record was last modified (iso 8601 format)Mon Sep 26 00:00:00 EDT 2016
    Vehicle has start-stop technology (y, n, or blank for older vehicles)N

  • Automatic (S6) Front-Wheel Drive 2

    Description Data
    Engine cylinders4
    Engine displacement in liters1.5
    Engine descriptor; see fueleconomy.gov detailsSIDI
    TransmissionAutomatic (S6)
    You save/spend over 5 years compared to an average car ($). savings are positive; a greater amount spent yields a negative number. for dual fuel vehicles, this is the cost savings for gasoline2250
    Description Data
    Annual petroleum consumption in barrels for fuel type 18.26417
    City mpg for fuel type 1,33
    Unrounded city mpg for fuel type 1,32.8333
    Tailpipe co2 in grams/mile for fuel type 1245
    Combined mpg for fuel type 1,36
    Unrounded combined mpg for fuel type 1,36.1342
    Engine cylinders4
    Engine displacement in liters1.5
    Drive axle typeFront-Wheel Drive
    EPA model type index8
    Engine descriptor; see fueleconomy.gov detailsSIDI
    EPA fuel economy score (-1 = not available)8
    Annual fuel cost for fuel type 1 ($)1500
    Fuel type with fuel type 1 and fuel type 2 (if applicable)Regular
    Fuel type 1. for single fuel vehicles, this will be the only fuel. for dual fuel vehicles, this will be the conventional fuel.Regular Gasoline
    EPA ghg score (-1 = not available)8
    Highway mpg for fuel type 1,41
    Unrounded highway mpg for fuel type 1,41.1962
    Hatchback luggage volume (cubic feet)16
    Hatchback passenger volume (cubic feet)87
    Vehicle record id36128
    Model name (carline)2
    Has my mpg data; see yourmpgvehicle and yourmpgdrivervehicleN
    If true, this vehicle operates on a blend of gasoline and electricity in charge depleting modefalse
    TransmissionAutomatic (S6)
    Unadjusted city mpg for fuel type 144.0
    Unadjusted highway mpg for fuel type 161.4
    EPA vehicle size classCompact Cars
    You save/spend over 5 years compared to an average car ($). savings are positive; a greater amount spent yields a negative number. for dual fuel vehicles, this is the cost savings for gasoline2250
    3-character manufacturer codeTKX
    Date the vehicle record was created (iso 8601 format)Tue Apr 07 00:00:00 EDT 2015
    Date the vehicle record was last modified (iso 8601 format)Mon Sep 26 00:00:00 EDT 2016
    Vehicle has start-stop technology (y, n, or blank for older vehicles)N
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SA-022-24 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • SA-027-24 - UNKNOWN OR OTHER: Some customers may complain about infotainment center display. Peeling, spider cracks and white dots.
  • 09-003-23b - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Some customers may complain about infotainment center display: center display touchscreen operates by itself (ghost touch). The film of the center display may be peeled off. White dots may appear on the center display note: the occurren
  • SA-032-23a - ENGINE AND ENGINE COOLING: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
  • SA-039-23a - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • SA-039-23 - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • 09-025-23 - VISIBILITY: Some customers may complain that the frequency of replenishing the window washer liquid is higher than expected, or they may complain of leakage at or around the washer motor (1). This is caused by a crack that may occur at the joint sectio
  • SA-032-23 - ENGINE AND ENGINE COOLING: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
  • SA-031-23 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • SA-012-23 - VISIBILITY: Some customers may report an odor or water in the hvac system and upon inspection, the cabin air filter may be found to be wet.
  • SA-016-23 - EQUIPMENT:ELECTRICAL: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary key trace cut method. B. Auxiliary key code cut method
  • 09-003-23a - EQUIPMENT: Some customers may complain about infotainment center display: - center display touchscreen operates by itself (ghost touch). - the film of the center display may be peeled off. - white dots may appear on the center display note: the oc
  • 09-003-23 - EQUIPMENT: Some customers may complain about infotainment center display: - center display touchscreen operates by itself (ghost touch). - the film of the center display may be peeled off. - white dots may appear on the center display note: the oc
  • SA-001-23a - EQUIPMENT: Some customers may complain about infotainment center display: - ghost touch - dtc B108E:04 may be stored (touch screen operates by itself) - surface peeling - dtc B108E:04 may be stored - spider cracks - white dots important note: d
  • SA-001-23 - EQUIPMENT: Some customers may complain about infotainment center display: - ghost touch - dtc B108E:04 may be stored (touch screen operates by itself) - surface peeling - dtc B108E:04 may be stored - spider cracks - white dots important note: d
  • RF-23-01 - ENGINE AND ENGINE COOLING: When servicing skyactiv engine vehicles requiring to replace the oil galley plug and crush washer, order the required part numbers below. These parts are not listed in gepc and were previously listed as "non-serviceable" in the cylinder blo
  • RF-22-01R3 - EQUIPMENT: This parts flash replaces rf-22-01r2 released january 04, 2022. It includes new display repair kit part numbers for the 2018-2019 mazda2, 2018-2020 cx-3 and 2018-2020 mx-5. Repair kits are available to replace just the screen. There is no
  • RF-22-01R2 - EQUIPMENT: This parts flash replaces rf-22-01r released november 21, 2022. It includes a new display repair kit part number for the 2020-2022 mx-5. Repair kits are available to replace just the screen. There is no need to replace the entire infotainm
  • SA-016-22a - EQUIPMENT: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary key trace cut method b. Auxiliary key code cut method
  • SA-041-22c - ELECTRICAL SYSTEM: Some customers may complain about infotainment center display: * ghost touch * dtc B108E:04 may be stored (touch screen operates by itself) * surface peeling * dtc B108E:04 may be stored * spider cracks * white dots
  • SA-075-22 - ELECTRICAL SYSTEM: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
  • 22-01R - ELECTRICAL SYSTEM: Repair kits are available to replace just the screen. There is no need to replace the entire infotainment display unit as the supply chain has been heavily impacted due to the global shortage of semiconductors. Please use the table below w
  • 09-018-22b - ELECTRICAL SYSTEM: Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 74.00.324 or later). The system performance has been improved as follows: ver. 74.00.324 fixes these software errors (b
  • 09-041-22 - ELECTRICAL SYSTEM: If the right-side blind spot monitoring (bsm) control module is replaced for any reason, it is also necessary to replace the left-side bsm control module in order to complete the radar aiming procedure. If the right-side bsm control module
  • 01-012-22 - ENGINE AND ENGINE COOLING: Some vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and p
  • SA-068-22 - POWER TRAIN: The new skyactiv-drive fw6a-el at uses "automatic transmission fluid (atf) type: fz". Only use "atf-fz" to fill or top off the fluid level. Atf-fz is specially designed for use in the skyactiv-drive series at. It is a low viscosity formula
  • SA-008-22a - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • 09-036-22 - EQUIPMENT: Some customers may complain about infotainment center display: - center display touchscreen operates by itself (ghost touch). - the film of the center display may be peeled off. - white dots may appear on the center display
  • SA-041-22c - ELECTRICAL SYSTEM: Some customers may complain about infotainment center display: - ghost touch (touch screen operates by itself) - spider cracks - surface peeling - white dots
  • RF-22-01 - ELECTRICAL SYSTEM: Some customers may complain about infotainment center display ghost touch (touch screen operates by itself), surface peeling or spider cracks. Repair kits are available to replace just the screen. There is no need to replace the entire inf
  • 09-017-22a - EQUIPMENT: Some vehicles may have rust on the contact parts between the clips (for attaching the roof molding) and the roof panel (ditches of the roof rail). This is caused by the gap between the roof molding attachment clips and the roof panel not b
  • Maintenance - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Maintenance.
  • Mazda TSB March - STRUCTURE: Mazda technical service bulletins march 2016 some vehicles may exhibit the inner cloth (a) falling down at the rear end causing a poor appearance and obstructing the view of the back window.
  • 0903615 - ELECTRICAL SYSTEM: Bsm radar aiming cannot be performed after rightside bsm control module rekkplacement
  • 0901316 - ELECTRICAL SYSTEM:ADAS:BLINDSPOT:WARNING:LAMP: Excessive condensation or water within the headlamp assembly caustion
  • 0901216 - EQUIPMENT: Paint damage mazda pocket paint guide
  • 0901016 - STRUCTURE:BODY:DOOR : Stains found on kpaint during pdi
  • 0900916 - ELECTRICAL SYSTEM: Handsfree bluetooth module and/or text messaging troubleshooting procedure
  • 0800116 - AIR BAGS: Passenger fairbag deactivation (pad) indicator light illumination
  • Transmission - POWER TRAIN: Multimodel (equipped with skyactivdrive) atf color deterioration new vehicle automatic transmission fluid (atf) color is blue. As the vehicle mileage increases, the atf color changes. The color change does not affect vehicle performance.
  • 0400416 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Brake noise, judder and dragging diagnosis and servicing
  • 0200716 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: Tire pressure monitoring system (tpms) warning light illuminationmisure prevention logic
  • 0200516 - SUSPENSION: Front/rear stabilizer noise prevention
  • 0200216 - WHEELS: Stains appear on wheels
  • 0100216 - EQUIPMENT: Premixed long life "fl22" engine coolant
  • 0100116 - ELECTRICAL SYSTEM: Engine start /stop procedure with room fuse removed
  • 0000216 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda guidelines for factory scheduled maintenance
  • SA-006-22a - EQUIPMENT:MECHANICAL: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
  • SA-008-22 - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • SA-006-22 - POWER TRAIN: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
  • 09-021-21-3818b - ELECTRICAL SYSTEM:SOFTWARE: All mazda connect vehicles in new car inventory must be updated to the software version listed below in this tsb as part of the new car ready step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicl
  • 05-001-21-3826 - POWER TRAIN: Some vehicles may experience the check engine light and automatic transaxle warning light on with one or more of these dtcs stored in the tcm memory (P0842, P0847, P0872, P0877, P0780, P1738). P0842:00 - oil pressure switch no. 1 (oil press
  • 09-021-21-3818a - EQUIPMENT:ELECTRICAL:INFOTAINMENT: Audio, navigation and phone concerns with mazda connect infotainment system (6th generation). All mazda connect vehicles in new car inventory must be updated to the software version listed below in this tsb as part of the new car ready step
  • 09-025-21-3824 - EQUIPMENT: This service bulletin provides information regarding the proper use of the driverâ¿¿s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided w
  • 09-022-21-3815 - VISIBILITY: Some customers may complain that the frequency of replenishing the window washer liquid is higher than expected, or they may complain of leakage at around the washer motor (1).This is caused by a crack that may occur at the joint section of
  • 09-021-21-3818 - EQUIPMENT: Audio, navigation and phone concerns with mazda connect infotainment system (6th generation). All mazda connect vehicles in new car inventory must be updated to the software version listed below in this tsb as part of the new car ready step
  • SA-040-21 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • MT-003-21 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building. This may be caused by the suns reflection. If a building creates enough of a curve with a series of flat windows, which act like mirrors, the reflecti
  • SA-032-21 - POWER TRAIN: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
  • MT-017-17 - EQUIPMENT: If you encounter any type of electrical concern (e.G, dead battery), interview the customer before proceeding with normal workshop manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aft
  • 09-044-17-3398 - BACK OVER PREVENTION:DISPLAY FUNCTION: Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display.
  • 01-006-21-3779 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 01-005-21-3778 - ELECTRICAL SYSTEM: The mazda dca-8000pm is required for all warranty battery testing. If the mazda dca-8000pm is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to t
  • 09-002-21-3770 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer
  • 09-019-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Fctry messasge displayed after instrument cluster replacement. After the installation of a new instrument cluster, the message "fctry" is displayed instead of the odometer. Some new instrument clusters are in the factory mode setting. Facto
  • 09-018-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Display shows inaccurate ambient temperature. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.
  • MT-001-17 - VISIBILITY:WINDSHIELD WIPER/WASHER: Windshield washer fluid change - factory filled windshield washer fluid has been changed to an ethanol type (yellow color) instead of athe conventional methanol type (blue color). This change is for european compliance mazda has decided to
  • SA266 - ELECTRICAL SYSTEM: Mazda mobile start (mms) cannot communicate with vehicle
  • 09-062-16 - EQUIPMENT ADAPTIVE/MOBILITY: Active driving display opens/closes improperly. Some vehicles may exhibit the active driving display opening/closing improperly as described below: * it does not open or close when the ignition is turned on or off . * the display operation
  • 07-006-16 - EQUIPMENT: A/c blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (a) of the evaporator (b) causing a refrigerant leak fr om the joint between the tubes and the header (
  • MTI_1032 - EQUIPMENT: Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
  • MTI_1031 - ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SOFTWARE: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - UNKNOWN OR OTHER: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • 09-020-16-3183 - EQUIPMENT ADAPTIVE/MOBILITY: Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.
  • 02-005-16-3152a - STRUCTURE: Beginning with the cx-5 and mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushi
  • SA327 - AIR BAGS: Takata recalls for air bag
  • MTI_1138 - POWER TRAIN:CLUTCH ASSEMBLY: Multi-model - clutch slippage or smell after clutch disc replacement
  • MTI_1137 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mulri-model (equipped with mazda connect) - dtc U0323/U0423/U3000 cannot be deleted (update)
  • 01-018-16 - BACK OVER PREVENTION: Unusual engine noise after a cold engine start. Some customers may complain about an unusual noise coming from the engine compartment for about 20 seconds after a cold engine start. This noise is a normal engine operation for improved exhau
  • MT-006-20 - EQUIPMENT ADAPTIVE/MOBILITY: Some customers may complain about the following mazda connectâ¿¢ temperature warning message: ï¿· display is too hot. Screen performance may be decreased until it cools. The warning message displays when the mazda connectâ¿¢ screen
  • MT-005-20 - ENGINE AND ENGINE COOLING: Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: engine oil consumption inspection guideline 1. R
  • 07-004-20-3741 - EQUIPMENT: Some customers may complain that the air conditioner (a/c) is not cooling. This may be caused by a refrigerant leak from the condenser due to corrosion where an anti-corrosion coating was uneven.
  • MT-002-20 - WHEELS: New carb regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including mazda dealerships) in california effective september 1, 2010.
  • 01-011-20-3734 - ENGINE AND ENGINE COOLING: Some customers may complain about an unusual noise coming from the engine compartment for about 20 seconds after a cold engine start. This noise is a normal engine operation for improved exhaust gas emissions. The noise does not indicate a
  • 09-006-20-3673a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 02-005-20-3688 - EQUIPMENT: Some customers may complain about a knocking noise heard from the rear suspension while driving on rough road. The noise may be caused by a broken bound (bump) stopper that breaks because of deterioration from environmental factors and bad
  • 04-006-20-3707 - SERVICE BRAKES, HYDRAULIC: Some customers may experience a tcs/dsc warning light and scbs warning light (amber) illumination with dtc C0051:62 stored in pcm memory. Dtc C0051:62 - eps control module[when the vehicle is driven in a straight line, the difference betwee
  • 09-006-20-3673 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-003-20-3671 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealerâ¿¿s responsibility
  • MT-002-19 - EQUIPMENT: If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • MT-003-19 - ENGINE AND ENGINE COOLING: Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
  • MT-002-19 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • 07-003-19-3608 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Some customers may complain about warm air from the climate control vents. This may be caused by improper brazing of the evaporator, causing a refrigerant leak from the joint between the tubes and the header.
  • 09-031-19-3625 - EQUIPMENT: After the installation of a new instrument cluster, the message "fctry" or ÿ¢ÿ¿ÿ¿factoryÿ¢ÿ¿ÿ is displayed instead of the odometer. This concern may also occur when a room fuse is installed in a new vehicle. Some new instrument
  • 09-010-19-3624 - VISIBILITY: Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.The front fender stay (2) newly painted surface at gr
  • SA-016-19 - WHEELS: There have been warranty claims submitted for noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additiona
  • 09-010-19-3577 - ELECTRICAL SYSTEM: Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.
  • MT-012-18 - STRUCTURE:BODY: If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a hunter gsp9700 or equivalent balance machine. If your dealer does not have a gsp9700 or
  • 09-005-19-3562 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 08-001-19-3544 - AIR BAGS: This information is provided to help address passenger airbag deactivation (pad) indicator illumination concerns during vehicle service.
  • 02-003-19-3547 - SUSPENSION: Beginning with the cx-5, grip type front and rear stabilizer bushings have been incorporated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
  • 02-002-19-3546 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • 04-002-19-3545 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 02-017-18-3511 - SUSPENSION:FRONT:SHOCK ABSORBER: Some vehicles may experience one or both of the following noises from the front shock absorber. A knocking/popping noise occurs when passing over speed bumps. A squeaking noise occurs when turning the steering wheel with vehicle at a stands
  • 09-014-18-3443a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-035-18-3509 - ELECTRICAL SYSTEM: Some customers may experience one or more electrical malfunctions after a vehicle body repair. The newly painted fender stay (2) may be causing a poor front harness (1) ground connection.
  • 08-001-18-3457 - AIR BAGS: This information is provided to help address passenger airbag deactivation (pad) indicator illumination concerns during vehicle service.
  • 04-004-18-3468 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 02-008-18-3467 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • MT-001-18 - EQUIPMENT:ELECTRICAL: When installing a navigation sd card, the center display may show error message "invalid sd card".
  • 09-014-18-3443 - STRUCTURE: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 02-005-18-3444 - SUSPENSION: Beginning with the cx-5, grip type front and rear stabilizer bushings have been incorporated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
  • 09-002-18-3410 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: After the installation of a new instrument cluster, the message "fctry" or "factory" is displayed instead ofthe odometer. This concern may also occur when a room fuse is installed in a new vehicle.Some new instrument clusters are in the fac
  • MT-001-18 - ELECTRICAL SYSTEM: When installing a navigation sd card, the center display may show error message "invalid sd card". This may be caused by: the navigation sd card lock tab is locked.The navigation sd card has a vin mismatch due to sd card swapping.The naviga
  • 09-020-16 - EQUIPMENT ADAPTIVE/MOBILITY: Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.
  • MT-016-17 - FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: The smart city brake support (scbs) system alerts the driver of a possible collision using an indication in the display and a warning sound when the forward sensing camera (fsc) detects a vehicle ahead and determines that a collision with a
  • 01-004-17-3317a - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Some vehicles may experience an engine that runs rough and the check engine light on with dtcs P0201 and P0204 or P0202 and P0203. Note: engine misfire related dtcs (P0301, P0302, P0303, P0304) are usually stored at the same time. P0201:00
  • SA-065-17 - EQUIPMENT:ELECTRICAL: Use the symptom troubleshooting tables below to diagnose mazda connect concerns. Mazda connect symptom troubleshooting table sections: audio system, bluetooth, center display, dtc, i-activesense, maintenance monitor, navigation, noise, reb
  • 09018173351 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
  • MT-015-17 - EQUIPMENT ADAPTIVE/MOBILITY: Some customers may complain about the following mazda connect temperature warning message: display is too hot. Screen performance may be decreased until it cools. The warning message displays when the mazda connect screen temperature is abo
  • SA-063-17 - ELECTRICAL SYSTEM:SOFTWARE: Some customers may complain about the "wrong" phone is connected to the infotainment system. Mazda connect bluetooth will connect all profiles to devices in order of priority if the last device is not available. This concern may be a normal
  • SA-061-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In an effort to achieve a higher level of customer experience and retain the value of mazda's vehicles, mnao warranty operations is 2017 mazda north american operations, u.S.A. Allowing all mazda dealers to utilize a third party, specmo en
  • SA-058-17 - VISIBILITY:WINDSHIELD: Caution: do not attempt any repair of the windshield damaged by stone chipping/cracks at the area in front of the forward sensing camera (fsc) and laser sensor. Replace the windshield with a new one instead.
  • SA-054-17 - LANE DEPARTURE: BLIND SPOT DETECTION: Blind spot monitoring (advanced bsm) system frequently asked questions (faq)
  • SA-052-17 - BRAKES (PWS): Smart city brake support (scbs) frequently asked questions (faq)
  • 07-003-17-3313 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Some customers may complain that it is difficult to adjust the cabin temperature using the auto a/c. This may be more noticeable when the outside temperature is approximately 50 degrees fahrenheit (10 celsius).
  • 09-008-17-3324 - EXTERIOR LIGHTING:HEADLIGHTS: Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by mazda's new vehicle limit
  • 04-004-16-3160 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 02-002-16-3124 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • 01-014-15-3055A - ENGINE (PWS): Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct
  • 09-036-15-3081A - LANE DEPARTURE: BLIND SPOT DETECTION: If the right-side bsm control module requires replacement for any repair, also replace the left side bsm control module to complete the radar aiming procedure (it is ok to replace the left bsm alone). Reason if the right-side bsm control mo
  • 09-036-15-3081 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : If the right-side bsm control module requires replacement for any repair, also replace the left side bsm control module to complete the radar aiming procedure (it is ok to replace the left bsm alone). Reason if the right-side bsm control mo
  • 09-037-15-3079 - EQUIPMENT ADAPTIVE/MOBILITY: Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.
  • 02-005-16-3152A - SUSPENSION:FRONT:STABILIZER BAR: Beginning with the cx-5 and mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushi
  • 02-009-16-3155 - STEERING: STEERING WHEEL/HANDLE BAR: Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.
  • MT-003-17 - EQUIPMENT ADAPTIVE/MOBILITY: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • 01-013-16-3202 - VEHICLE SPEED CONTROL:ACCELERATOR PEDAL: Some vehicles may exhibit the accelerator pedal hinge separating from the base in cold temperatures below 32 degrees fahrenheit (0 degrees celsius).The accelerator pedal has been changed to increase durability.
  • 09-032-16-3201 - SEATS: Some customers may complain about a front seat recliner lever knob difficult to move. This makes it difficult to change the seat back reclining position. This may be caused by a return recliner lever knob spring (a) that is too strong
  • 06-002-16-3194 - STEERING: Some vehicles may exhibit an unusual noise from around the drivers foot area when repeatedly turning the steering wheel to the left or right. A vibration is felt at the steering wheel when the noise occurs. This concern may be caused by a
  • 1080M - ENGINE (PWS): If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • 00-004-16-3237 - EQUIPMENT: Raising a vehicle with a jack can be dangerous if not done properly. The vehicle can slip off the jack and seri-ously injure someone. In this service information, some important warnings and cautions have been taken from the owners manual.
  • 1099M - ELECTRICAL SYSTEM: When reprogramming a control module, always use the gr-8 battery management system power supply mode. If not used, the control module reprogramming may fail due to a weak vehicle battery.The gr-8 battery management system power supply mode
  • 1066M - EXTERIOR LIGHTING: Some customers may complain about improper operation of the auto-dimming mirror. This may be caused by an obstruction of the front and/or rear light sensor(s) (e.G. Hanging a parking permit from the mirror). Use a soft cloth with mild deter
  • 1098M - STRUCTURE: When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
  • 1096M - ELECTRICAL SYSTEM:WIRING: If the active driving display (ad-disp) unit requires removal, use caution when disconnecting/connecting the wiring harness. If the harness is not connected properly, the ad-disp may not operate.
  • MTI_1031 - EQUIPMENT: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • MTI_1032 - EQUIPMENT: Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
  • MTI_1031 - EQUIPMENT: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:HEATER CORE: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • 09-020-16-3183 - EQUIPMENT: Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.
  • 02-005-16-3152A - SUSPENSION: Beginning with the cx-5 and mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushi
  • 02-009-16-3155 - STEERING: Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.
  • 1098M - STRUCTURE: When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
  • 1096M - ELECTRICAL SYSTEM: If the active driving display (ad-disp) unit requires removal, use caution when disconnecting/connecting the wiring harness. If the harness is not connected properly, the ad-disp may not operate.
  • SA234 - ELECTRICAL SYSTEM:SOFTWARE: Ids update 101.00 and 101.02 is now available on ms3 under the "ids/infotainment" tab.
  • 1080M - ENGINE (PWS): If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • 09-036/15 - ELECTRICAL SYSTEM: Bsm radar aiming cannot be performed after right-side bsm control module replacement. If right-dide bsm control module requres replacement for any repair, also replace left side bsm control module to compelte the radar aiming procedure (
  • 09-010/16 - STRUCTURE: Stains found on paint during pdi some vehicles may experience stains appearing on the hood, roof and/or trunk of vehicle. This concern is most likely to be found in cold weather areas just after the rapgard is removed at pdi. This may
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Additional Error TextThe error positions are indicated by ! in Suggested VIN. In the Possible values section, each pair of parenthesis indicate information about each error position in VIN . The Numeric value before the : indicates the position in error and the values after the : indicate the possible values that are allowed in this position Unused position(s): 6,7,8;
Error Code5,14
Error Text5 - VIN has errors in few positions; 14 - Unable to provide information for some of the characters in the VIN, based on the manufacturer submission.
MakeMAZDA
MakeID473
ManufacturerMAZDA MOTOR MANUFACTURING DE MEXICO S.A. DE C.V.
Manufacturer Id1083
ModelMazda2
ModelID2153
Model Year2016
NCSA MakeMazda
NCSA ModelMazda2
NotePlant Company - MMMdM(Mazda Motor Manufacturing de Mexico, S.A., de C.V.)
Plant CityGUANAJUATO
Plant Company NameMMMdM(Mazda Motor Manufacturing de Mexico)
Plant CountryMEXICO
Plant StateSALAMANCA
Possible Values(6:AB)(7:ABCDEX)(8:V)
SuggestedVIN3MDDJ!!!5GM214462
VIN3MDDJ6H55GM214462
Vehicle Descriptor3MDDJ6H5*GM
Vehicle TypePASSENGER CAR
More information on VIN Requirements can be found at Title 49
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
3MDDJ6H55GM2144622016Mazda2GUANAJUATO SALAMANCA, MEXICO

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.