09-041-22

BULLETIN NOTES
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text.
Previous TSBs:
Date(s) Issued:
09-017/19
03/28/2019
09-036/15
09/08/2015 and 12/17/2015
APPLICABLE MODEL(S)/VINS
2016- 2022 CX-3
2016- 2022 MX-5
2016- 2023 Mazda2 (Mexico Spec.)
DESCRIPTION
If the right-side Blind Spot Monitoring (BSM) control module is replaced for any reason, it is also necessary to replace the
left-side BSM control module in order to complete the radar aiming procedure. If the right-side BSM control module is
replaced alone, "Automatic Configuration" and "BSM Radar Aiming" cannot be completed due to a programming error in
the module.
Other possible symptoms that may be found if the right-side BSM module is replaced alone:
• BSM aiming fails
• “BSM OFF" indicator ON
• Center Display warning message
• BSM failsafe (No operation)
• DTC U3000:54 stored in memory
• DTC U1A4B:54 stored in memory (CX-3, MX-5 only)
Replacement of BSM Control Module
Radar Aiming
Left-Side BSM
Right-Side BSM
Not Replaced
Replaced
Not Possible
Replaced
Not Replaced
Possible
Replaced
Replaced
Possible
NOTE: For additional (CX-3) information see TSB 09-031/18 (2016 CX-3 - CONFIGURATION FAILS WHEN
REPLACING RIGHT-SIDE BSM CONTROL MODULE).
Page 1 of 3
10/20/2022 07:15 AM cciz
NOTE: For details of "Automatic Configuration" and "BSM Radar Aiming", refer to MGSS online:
• BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION
• BLIND SPOT MONITORING (BSM) RADAR AIMING
PARTS INFORMATION
Model
Parts Number
Description
DA6A-67-Y80*
BSM Control Module (R)
DB7R-67-Y80*
BSM Control Module (R)
D24H-67-Y80*
BSM Control Module (R)
DB2R-67-Y80*
BSM Control Module (R)
N243-67-Y80*
BSM Control Module (R)
Notes
Mazda2
Verify part number(s) in GEPC
CX-3
MX-5
WARRANTY INFORMATION
The following Warranty Information is for Customer Satisfaction purpose only and to be used only under the following
conditions:
• The right sensor is replaced, as customer pay item, such as the right sensor is damaged during a traffic accident.
• The Vehicle is still within its New Vehicle Limited Warranty 36 months / 36,000 miles.
Claim Submission will require the following documentation:
• Copy of Customer Pay Repair Order showing customer was not charged for the BSM Control Module - use
Attachment ID = D01 - Copy of Current Repair Order (Front and Back).
NOTE: If the right-side BSM control module replacement is necessary at customer expense because of body shop
repair, the part cost of the left-side BSM will be reimbursed under special warranty treatment. Submit the claim
with the following information.
NOTE:
• This repair will be covered under Mazda’s New Vehicle Limited Warranty term.
• Labor Time is not allowable for this claim.
Warranty Type
Symptom Code
Damage Code
Part Number Main Cause / Quantity
Related Part Number / Quantity
A
64
9W
****-67-Y80 / 0
**** 67 Y90 / 1
---Right-side BSM control module
Left-side BSM control module
Page 2 of 3
10/20/2022 07:15 AM cciz
Operation Number / Labor Hours:
XXL7PXRX / 0.0 Hrs.
--
NOTE: When the right-side BSM is replaced by warranty repair, submit a normal warranty claim by entering the right
BSM Control Module part number and the quantity 1 in "CAUSAL" and the left-side BSM Control Module part number
and the quantity 1 in "RELATED".
Page 3 of 3
10/20/2022 07:15 AM cciz