1080M

Service Bulletin Details

Public Details for: 1080M

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine


- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -

Page 1 of 1
Replacement Engine Assembly Failure
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before
installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail
prematurely.
Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the
new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.
Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.
If the intake manifold cannot be properly cleaned internally, replace it.
Warranty Compliance Note: Mazda's Warranty Policy does not cover damage to the replacement engine if the intake manifold
was not cleaned properly.
https://portal.mazdausa.com/pinquiraesi/mazdaesi/index?page=detail_pagelet&id=MTI1080... 7/7/2016


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.