2015 MAZDA MAZDA2Mazda Mazda2 2015

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2015 MAZDA MAZDA2, manufacturered by Mazda Motor Manufacturing De Mexico S.a. De C.v..

ManufacturerKnown WMI(s)Fuel Type
MAZDA3MD JM1
MAZDA VIN Decoder

Use the box here to look up VINs from MAZDA as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2015 MAZDA MAZDA2 produced?
     - The 2015 MAZDA MAZDA2 is produced in Salamanca Guanajuato, Mexico.
  • Are there recalls for the 2015 MAZDA MAZDA2?
     - There are 3 recall(s) for the 2015 MAZDA MAZDA2, additional information is below.
NHTSA Mandated Recalls

  • Recall R/2016/186 [UK]: Fuel may leak

  • Recall R/2018/087 [UK]: Software error can cause engine to fail

  • Recall 2017120 [Canada]: Label

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SA-075-22 - ELECTRICAL SYSTEM: If you encounter any type of electrical concern (e.G, dead battery, engine no start, dtc(s) stored...), interview the customer before proceeding with normal mgss diagnosis by asking if any aftermarket devices have been installed. Aftermarke
  • SA-008-22a - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • 0901316 - ELECTRICAL SYSTEM:ADAS:BLINDSPOT:WARNING:LAMP: Excessive condensation or water within the headlamp assembly caustion
  • 0901216 - EQUIPMENT: Paint damage mazda pocket paint guide
  • 0901016 - STRUCTURE:BODY:DOOR : Stains found on kpaint during pdi
  • 0900916 - ELECTRICAL SYSTEM: Handsfree bluetooth module and/or text messaging troubleshooting procedure
  • 0800116 - AIR BAGS: Passenger fairbag deactivation (pad) indicator light illumination
  • 0400416 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Brake noise, judder and dragging diagnosis and servicing
  • 0200216 - WHEELS: Stains appear on wheels
  • 0101415 - ELECTRICAL SYSTEM: Engine oil seepage from engine oil pressure switch
  • 0100216 - EQUIPMENT: Premixed long life "fl22" engine coolant
  • 0100116 - ELECTRICAL SYSTEM: Engine start /stop procedure with room fuse removed
  • 0000216 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda guidelines for factory scheduled maintenance
  • 01-003/22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The mazda dca-8000 is required for all warranty battery testing. If the mazda dca-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
  • SA-014-22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Accessory instructions can be found on onemazda under dealer resources - parts & accessories.
  • SA-008-22 - STRUCTURE: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • SA-006-22 - POWER TRAIN: There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warr
  • 09-025-21-3824 - EQUIPMENT: This service bulletin provides information regarding the proper use of the driverâ¿¿s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided w
  • SA-040-21 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building or low-e windows. This may be caused by the sun's reflection.
  • SA-041-21 - EQUIPMENT: Accessory instructions can be found on onemazda under dealer resources - parts & accessories. The links provided below can be used for quick access: for 2016 models and newer: note: instructions are found under the "attachments" section onc
  • MT-003-21 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: Some vehicles may experience exterior trim heat damage when parked near a glass building. This may be caused by the suns reflection. If a building creates enough of a curve with a series of flat windows, which act like mirrors, the reflecti
  • MT-017-17 - EQUIPMENT: If you encounter any type of electrical concern (e.G, dead battery), interview the customer before proceeding with normal workshop manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aft
  • 01-006-21-3779 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 01-005-21-3778 - ELECTRICAL SYSTEM: The mazda dca-8000pm is required for all warranty battery testing. If the mazda dca-8000pm is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to t
  • 09-002-21-3770 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer
  • 09-018-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Display shows inaccurate ambient temperature. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.
  • MTI_1032 - EQUIPMENT: Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
  • MTI_1031 - ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SOFTWARE: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - UNKNOWN OR OTHER: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • 02-009-16-3155 - STEERING: Some customers may complain that the steering wheel is off center more than 3" even when driving straight on a flat road.
  • MT-005-20 - ENGINE AND ENGINE COOLING: Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary: engine oil consumption inspection guideline 1. R
  • MT-002-20 - WHEELS: New carb regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including mazda dealerships) in california effective september 1, 2010.
  • 09-006-20-3673a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 09-006-20-3673 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-003-20-3671 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealerâ¿¿s responsibility
  • 04-001-20-3672 - SERVICE BRAKES, HYDRAULIC: Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • MT-002-19 - EQUIPMENT: If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • MT-003-19 - ENGINE AND ENGINE COOLING: Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
  • MT-002-19 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • SA-013-19 - EQUIPMENT: Mazda ids inoperative with vcm-ii license expiration message - if you encounter an ids inoperative problem with vcm-ii license expiration message, follow the instructions below: 1. Click here to download the resetting tool to your pc deskto
  • MT-012-18 - STRUCTURE:BODY: If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a hunter gsp9700 or equivalent balance machine. If your dealer does not have a gsp9700 or
  • 09-005-19-3562 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-004-19-3543 - EQUIPMENT: Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconne
  • 08-001-19-3544 - AIR BAGS: This information is provided to help address passenger airbag deactivation (pad) indicator illumination concerns during vehicle service.
  • 02-002-19-3546 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • 00-002-19-3561 - BRAKES (PWS): Mazda north american operations has approved an additional on-car brake lathe as an option for mnao authorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorized equipment program. Note: accu-turn is still an ap
  • 04-002-19-3545 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 09-014-18-3443a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 00-003-18-3480a - EQUIPMENT: Mazda north american operations has approved an additional on-car brake lathe as an option for mnao authorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorized equipment program. Note: accu-turn is still an ap
  • 09-025-18-3479 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconne
  • 00-003-18-3480 - BRAKES (PWS): Mazda north american operations has approved an additional on-car brake lathe as an option for mnaoauthorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorizedequipment program.Note: accu-turn is still an appro
  • 08-001-18-3457 - AIR BAGS: This information is provided to help address passenger airbag deactivation (pad) indicator illumination concerns during vehicle service.
  • 04-004-18-3468 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 02-008-18-3467 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • MT-003-18 - EQUIPMENT: The workshop manual has two-different airbag procedures, one for standard deployment and one for two-step deployment. Standard deployment is for mexico spec vehicles and two-step deployment is for us and canadian spec vehicles.
  • 09-014-18-3443 - STRUCTURE: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 09018173351 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature. When you encounter a customer with this concern, first verify the condition when the customer
  • SA-061-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In an effort to achieve a higher level of customer experience and retain the value of mazda's vehicles, mnao warranty operations is 2017 mazda north american operations, u.S.A. Allowing all mazda dealers to utilize a third party, specmo en
  • SA-058-17 - VISIBILITY:WINDSHIELD: Caution: do not attempt any repair of the windshield damaged by stone chipping/cracks at the area in front of the forward sensing camera (fsc) and laser sensor. Replace the windshield with a new one instead.
  • 09-008-17-3324 - EXTERIOR LIGHTING:HEADLIGHTS: Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by mazda's new vehicle limit
  • 04-004-16-3160 - BRAKES (PWS): Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur,
  • 02-002-16-3124 - WHEELS: Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under
  • 01-014-15-3055A - ENGINE (PWS): Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct
  • 09-030-15-3073 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange. Refer to dag exchange central (mxconn
  • 02-009-16-3155 - STEERING: STEERING WHEEL/HANDLE BAR: Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.
  • 01-003-15-3014 - EQUIPMENT: Use the following repair procedure to minimize the need to replace the catalyst converter/exhaust pipe when removing oxygen sensors and/or air fuel ratio sensors.
  • 09-009-15-3015 - EQUIPMENT: Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the rapgard is removed at pdi. This may be caused by moisture which has
  • 09-027-14-2935 - EQUIPMENT ADAPTIVE/MOBILITY: This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
  • 00-002-14-2936 - EQUIPMENT: Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we
  • 1080M - ENGINE (PWS): If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • 00-004-16-3237 - EQUIPMENT: Raising a vehicle with a jack can be dangerous if not done properly. The vehicle can slip off the jack and seri-ously injure someone. In this service information, some important warnings and cautions have been taken from the owners manual.
  • 1099M - ELECTRICAL SYSTEM: When reprogramming a control module, always use the gr-8 battery management system power supply mode. If not used, the control module reprogramming may fail due to a weak vehicle battery.The gr-8 battery management system power supply mode
  • 1102M - ENGINE (PWS): Workshop manual evap system leak inspection using the m-mds has been discontinued for some models. Instead, the workshop manual evap system leak inspection using evap leak tester will be used to troubleshoot evap system leaks.
  • 1098M - STRUCTURE: When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
  • MTI_1031 - EQUIPMENT: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • MTI_1032 - EQUIPMENT: Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
  • MTI_1031 - EQUIPMENT: Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
  • MTI_1111 - EQUIPMENT: When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other ve
  • MTI_1034 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:HEATER CORE: This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
  • 02-009-16-3155 - STEERING: Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.
  • 1098M - STRUCTURE: When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
  • SA234 - ELECTRICAL SYSTEM:SOFTWARE: Ids update 101.00 and 101.02 is now available on ms3 under the "ids/infotainment" tab.
  • 1080M - ENGINE (PWS): If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine
  • 09-010/16 - STRUCTURE: Stains found on paint during pdi some vehicles may experience stains appearing on the hood, roof and/or trunk of vehicle. This concern is most likely to be found in cold weather areas just after the rapgard is removed at pdi. This may

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.