00-003-18-3480

Technical
Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
ON-CAR BRAKE LATHE
Bulletin No.: 00-003/18
Last Issued: 05/11/2018
BULLETIN NOTES
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text.
Previous TSBs: Date(s) Issued:
00-002/14
06/10/2014
ST-001/11
06/23/2011
APPLICABLE MODEL(S)/VINS
1995-2009 B-Series 1997-2002 Millenia 2004-2018 Mazda3 2016-2018 CX-3
1997-2003 Protege 1997-2006 MPV 2006-2015 Mazda5 2007-2018 CX-9
1997-2005 Miata 2001-2011 Tribute 2003-2018 Mazda6 2006-2018 MX-5
1997-2002 626
2011-2015 Mazda2 2013-2018 CX-5 2004-2011 RX-8
2007-2012 CX-7
DESCRIPTION
Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO
authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized
equipment program.
NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor.
IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims
are subject to denial or debit.
Tool Number
Description
Pricing
PC1923MAZ Pro-Cut On-Car Brake Lathe Check eStore or call for current pricing
Page 1 of 2
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2018 Mazda North American Operations, U.S.A.
Bulletin No.: 00-003/18
Last Issued: 05/11/2018
OBTAINING TOOLS
This tool can be ordered through Mazda eStore. You can log on to eStore at: http://dealers.mazdausa.com
CUSTOMER SERVICE INFORMATION
For warranty or product information contact Mazda Authorized Service Equipment at 877-768-6657.
Customer service representatives are available from 7:30 AM until 7:00 PM CST, Monday through Friday.
SPECIAL SERVICE TOOL (SST)
PART NAME: OVERVIEW
Pro-Cut On-Car
Brake Lathe
PART
NUMBER:
PC1923MAZ
APPLICABLE
MODELS:
All
USAGE:
To machine
brake rotors on
the vehicle.
Page 2 of 2
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2018 Mazda North American Operations, U.S.A.