Mazda B-series Truck 2002

• Recall 67474 [USA]: A vehicle fire could occur with or without the engine running.
  Mazda is recalling model year 1995 through 1997 and model year 2001 through 2003 trucks equipped with texas instruments speed control deactivation switch (scds) and/or anti-lock brake system (abs) and manufactured on or before december 5, 2002. A component of the cruise control deactivation switch may deteriorate over time and develop a leak. This occurrence could cause the switch to overheat, smoke or burn which could result in an under hood fire.
  mazda will notify owners that dealers will install a universal fused jumper harness on the cruise control deactivation switch free of charge. The safety recall began on december 11, 2009. Owners may contact mazda at 1-800-222-5500 option #6.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 89263 [USA]: This could result in an underhood fire.
  On certain trucks equipped with a speed control system, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
  dealers will install a fused wiring harness. An interim notice was sent to owners on september 7, 2007, directing them to have the speed deactivation control switch disconnected temporarily. A second notification letter to owners was in february 2008 advising them to return to dealers for installation of the repair part. Owners of affected vehicles who did not receive a phase 2 notice and have not had the recall completed will be notified beginning august 6, 2008. Owners may contact mazda at 1-800-222-5500.
  mazda recall no. 4707h.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall R/2016/210 [UK]: Fire may occur
  Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.
  on affected vehicles replace the ignition switch.

  Show Content

• Recall R/2003/058 [UK]: Front steering knuckle may have cracked
  The front steering knuckle may be cracked in the area where it connects to the front tie rod ball joint. In a "worst case" failure directional control of the vehicle could be affected.
  examine potentially affected vehicles and fit new steering knuckles where found necessary.

  Show Content

• Recall 2009332 [Canada]: Electrical
  On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: dealers will install a new switch or fused wiring harness. Note: this is an expansion of recall 2007263 (4707h) for vehicles not previously included in the campaign.

  Show Content

• Recall 2007263 [Canada]: Electrical
  On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. Correction: initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a fused wiring harness designed to eliminate the potential risk of fire.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Can not get the local mazda dealer (skyland automotive)(888-231-1092) to make an appointment to have the safety recall 4707h repaired. Can you help.

I was driving in the high way and braked for there was traffic ahead and as soon as my rpm went low my truck suddenly hesitated deeply and turned off. *tr

Engine cooling system had internal corrosion which caused heating failure (thermostat). In new hampshire when the temperature is at or below zero, the risk of freezing to death because the car will not heat properly could have its consequences. In order to correct the problem, the engine had to be replaced (used engine) at a cost of $3000.00 the problem was caused, most likely by incorrect antifreeze installed in the engine. This was done either at the factory or the new car dealership when the car was preped for sale. *tr

Passenger low beam headlight does not work fuse is ok fuse slot has power lamp was replaced still does not work. *tr

Dealer confirms this recall was completed nov 1, 2007 i called today to confirm, and gave my new address: 4133 224th lane se, unit #101, issaquah, wa 98029-5203. How do i get this recall removed - important for potential future sale... Dealer is lee johnson chev /mazda of kirkland wa. Updated 02/08/17*lj *cn

Factory recall we were notified to have our cruise control on our 2002 mazda 4wd-b400 pu disconnected because of a factory recall. We did this in october 2007. To date we have heard nothing about the repairs. Our dealers keeps telling us that they are waiting for parts. Where in the world are these parts manufactured that they can't get them by now? Since then we are getting an "engine light on" which indicates that we either have a short circuit condition or the dpfe/egr valve pressure sensor has failed. I want to know if this is due to their disconnecting the cruise control? Please let me know soon! *tr

Tl*the contact owns a 2002 mazda B3000. The contact received a safety recall notice and took her vehicle to the mazda dealer on september 26, 2007. The dealer deactivated the cruise control switch, however, the abs light illuminated the same day. The vehicle was returned to the dealer on september 27, 2007. Mazda reconnected the cruise control switch and informed her that the safety recall did not apply to her vin. She stated that the abs light was not illuminated when she brought the vehicle in for the recall repair. The purchase date and recall number were unknown. The current and failure mileages were 28,000.

Tl*the contact owns a 2002 mazda B3000. While the contact was seated in the parked vehicle, the driver's seat back rest failed. He currently has a box behind the back rest to keep it erect. The dealer wants to keep the vehicle overnight and charge for a diagnostic. The contact does not want to leave his vehicle overnight or pay for the diagnostic. He feels that it is mazda's responsibility to correct the failure for free. The contact plans to take the vehicle to an independent body shop. The current mileage was 72,000 and failure mileage was 55,000.

The vehicle is a 2002 mazda b4000 truck. Problem: intermittent air bag indicator light on dash. Took to local dealer on 6-29-06 and diagnostic analysis showed a faulty air bag harness. Warranty purchase date was 03-31-03 with 3 year expiration 03-31-06. Current odometer is 49,849. Cost of repair is stated by dealer to be $1500 parts and labor for replacement or they say manufacturer has "approved" a less expensive repair of replacing only the connectors at a cost of $422.96 parts and labor. Concern about longevity of original product parts, safety of occupant(s) with indicator light on and or off, high cost of repair, and short term repair guarantee. Do not feel secure in the vehicle with my family. *nm

Common OBD-II Error Codes

• B2300 [1] Seat Driver Memory Position Error
• P0401 [3] Exhaust Gas Recirculation Flow Insufficient Detected
• P0402 [3] Exhaust Gas Recirculation Flow Excessive Detected
• P1400 [3] Glow Plug Monitor Fault (Bank #1)
• P1401 [3] Glow Plug Monitor Fault (Bank #2)
• P0442 [1] Evaporative Emission Control System Leak Detected (small leak)
• P0455 [1] Evaporative Emission Control System Leak Detected (gross leak)
• P0456 [1] Evaporative Emissions System Small Leak Detected
• P0457 [1] Evaporative Emission Control System Leak Detected
• P1442 [1] A/C Evaporator Air Temperature Circuit Range/Performance
• B1877 [1] Seatbelt Driver Pretensioner Circuit Open
• B1881 [1] Seatbelt Passenger Pretensioner Circuit Open
• P0732 [1] Gear 2 Incorrect ratio
• P0733 [1] Gear 3 Incorrect ratio
• P1762 [1] Coast Clutch Solenoid Circuit Malfunction
• P0602 [1] Control Module Programming Error
• P1635 [1] Internal Vref Malfunction
• P1639 [1] Data Output Link Circuit Failure
• P0300 [1] Random/Multiple Cylinder Misfire Detected
• B3000 [4] B3000
• P2257 [1] Secondary Air Injection System Control "A" Circuit Low