00-001-13-2748A

Service Bulletin Details

Public Details for: 00-001-13-2748A

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner?S manu


- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 -

Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
© 2013 Mazda Motor of America, Inc.
Subject:
Bulletin No:
00-001/13
Last Issued:
04/17/2013
MAZDA GUIDELINES FOR FACTORY SCHEDULED MAINTENANCE
MULTI-MODEL - MAZDA GUIDELINES FOR FACTORY SCHEDULED MAINTENANCE
BULLETIN NOTE
• This bulletin supersedes the previous bulletin 00-001/13, issued on 01/16/2013 and 00-004/12, issued on 12/
19/2012. The APPLICABLE MODEL(S)/VINS and FACTORY RECOMMENDED FLUIDS have been revised.
• Changes are noted below in Red beside the change bar.
APPLICABLE MODEL(S)/VINS
1995-2009 B-Series
1997-2002 Millenia
2004-2014 Mazda3
2007-2012 CX-7
1997-2003 Protege
1997-2006 MPV
2006-2013 Mazda5
2007-2013 CX-9
1997-2005 Miata
2001-2011 Tribute
2003-2014 Mazda6
2006-2013 MX-5
1997-2002 626
2011-2013 Mazda2
2013-2014 CX-5
2004-2011 RX-8
DESCRIPTION
Mazda has developed factory recommended scheduled maintenance services that support all major vehicle
systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific
workshop manual or owner’s manual.
Services performed outside of Mazda’s factory scheduled maintenance are not recommended. These services
are unnecessary and create unneeded expenses for your customers.
SCHEDULED MAINTENANCE
Refer to the applicable Workshop Manual or Owner’s Manual for vehicle -specific manufacturer scheduled
maintenance.
a. Workshop Manual - Refer to section 00-00 SCHEDULED MAINTENANCE.
b. Owner’s Manual - Refer to section 8 Maintenance and Care.
Page 1 of 3
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
Bulletin No: 00-001/13
Last Issued: 04/17/2013
© 2013 Mazda Motor of America, Inc.
NOTE: The following services are not included in Mazda’s Factory Scheduled Maintenance:
Service
Notes
•
Transmission flushes
•
•
Transmission fluid flushing should only be performed when instructed
by Workshop Manual or any other Mazda publication.
Transmission fluid replacement is only recommended on B-Series
Truck and Tribute and should be performed only at the mileage intervals specified in the owner’s manual.
Transmission flushing is recommended if the customer accidentally adjusted the transmission level using an incompatible type of fluid.
•
Transmission oil additives could (under certain conditions) lead to
internal damage and void the warranty.
Engine flushes
•
•
Engine oil flushes are unnecessary.
Contaminated oil from flushing machines may damage the engine and
void the warranty.
Engine oil additives
•
These additives could (under certain conditions) lead to engine
damage, prevent piston rings from sealing, and void the warranty.
•
Mazda recommends coolant replacement starting at 100,000 miles of
service on some vehicles and 2 years on others, depending on the
model.
Flushing the coolant system is only recommended if the customer accidentally adjusted the coolant level using an incompatible type of coolant.
Flushing machines that “recondition” the existing coolant should never
be used. This procedure cannot completely reverse the chemical deterioration that occurs to the coolant during use.
Transmission oil additives
Engine cooling system
flushing
•
•
Cleaning of injectors
Nitrogen for tires
Brake fluid flushes
•
•
Cleaning injectors without an actual power related complaint from the
customer, does not improve engine performance.
Fuel injector malfunctions should only be repaired by replacement.
•
•
Compressed air contains approximately 80 percent nitrogen.
There is no practical value added from filling tires with nitrogen.
•
Brake fluid flushing should only be performed when instructed by
Workshop Manual or any other Mazda publication.
Contaminated fluid from flushing machines may damage the brake
system and void the warranty.
•
•
Power Steering fluid flushes
•
Power Steering fluid flushing should only be performed when instructed
by Workshop Manual or any other Mazda publication.
Contaminated fluid from flushing machines may damage the power
steering system and void the warranty.
Page 2 of 3
Bulletin No: 00-001/13
Last Issued: 04/17/2013
© 2013 Mazda Motor of America, Inc.
FACTORY RECOMMENDED FLUIDS
Only use Factory Recommended Fluids. The fluid application chart can be found on MXConnect.
Mazda Fluids Application Chart
CLICK HERE to open or:
1. From the MXConnect home page, select the “Parts and Accessories” link.
2. Select “Parts” from the Parts and Accessories drop down list.
3. From the Parts home page, select the “Dealer Assistance Group (DAG)” link below the Support header.
4. From the Dealer Assistance Group (DAG) home page, select the “Fluids Application Chart” link below the
Misc Application Listings header.
NOTE: Mazda Engine Oil Program Castrol® fluids are also approved for Mazda’s Factory Scheduled
Maintenance.
WARRANTY COMPLIANCE NOTE: Failure to use the recommended fluids may cause component damage
and void the warranty.
Page 3 of 3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.