Mazda Mpv 2001

• Recall 42878 [USA]: It is possible that the broken actuator cable may be out of position and could interfere with the operation of the accelerator cable, preventing a decrease in engine speed while driving, increasing the risk of a crash.
  On certain minivans equipped with cruise control, the cruise control actuator cable may be broken due to insufficient strength (group 1). Also included are certain 2000-2001 minivans equipped with cruise control built between march 31, 1999 and march 31, 2001, that have had the cruise control repaired and possibly had a defective cable installed during that repair (group 2).
  dealers will replace the actuator cable. Owner notification for vehicles involved in group 1 began on july 7, 2004. Owner notification for vehicles involved in group 2 began on september 10, 2004. Owners should contact mazda at 1-800-222-5500.
  mazda recall no. 2004f.Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 1035 [USA]: The seat occupant may not be properly protected in the event of a collision, increasing the risk of personal injury.
  On certain passenger vehicles, some of the passenger air bag modules were not properly welded and may not deploy in a collision.
  dealers will replace the passenger air bag module. Owner notification began october 4, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda at 1-800-222-5500.
  also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2759 [USA]: If partial failure occurred in the braking system, the stopping distance of the vehicle could increase, increasing the risk of a crash.
  Vehicle description: certain mini vans without anti-lock braking systems (abs) fail to comply with the requirements of federal motor vehicle safety standard no. 135, "passenger car brake systems." due to inappropriate brake pipe layout, these vehicles do not meet the brake stopping distance with partial failure requirements of the standard.
  dealers will modify the brake system. Owner notification began january 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda at 1-800-222-5500, option #4.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall R/2016/210 [UK]: Fire may occur
  Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.
  on affected vehicles replace the ignition switch.

  Show Content

• Recall 2005082 [Canada]: Other
  On certain vehicles, the liftgate stay dampers and stud bolts may rust and stick together, causing the stud bolds to break off. In the worst case, this condition may allow the liftgate to suddenly drop during opening or closing, injuring the operator. Correction: dealers will replace the left and right dampers and stud bolts.

  Show Content

• Recall 2004183 [Canada]: Engine
  On certain vehicles, the cruise control actuator cable may be broken due to insufficient strength. Also included are certain 2000-2001 minivans built between march 31, 1999 and march 31, 2001, that have had the cruise control repaired and possibly had a defective cable installed during that repair. It is possible that the broken actuator cable may be out of position and could interfere with the operation of the accelerator cable, preventing a decrease in engine speed while driving, increasing the risk of a crash. Correction: dealers will replace the actuator cable.

  Show Content

• Recall 2004376 [Canada]: Engine
  On certain vehicles equipped with a 2.5l v6 duratec engine, while driving at a constant speed on the highway, it is possible that the engine speed will not decrease when releasing the accelerator pedal due to a frozen throttle valve. This condition occurs at ambient temperatures from -30 to -40 degrees celsius. The vehicle can be brought to a full stop by depressing the brake pedal. Correction: dealers will replace the intake manifold and pcv hose with modified parts which will change the layout of the pcv hose system.

  Show Content

• Recall 2002145 [Canada]: Airbag
  On certain vehicles, the diffuser may come off the inflator for the passenger air bag during deployment due to improper welding. Under these conditions, expanded gas cannot be supplied to the bag and may not deploy during a frontal crash. Correction: dealers will replace the passenger side airbag with a correct one.

  Show Content

• Recall 2001297 [Canada]: Brakes
  Due to inappropriate brake pipe layout certain vehicles fail to meet the required partial failure stopping distance required by c.M.V.S.S. 135. Correction: dealers will replace the proportioning valve, brake pipes, and hardware.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

When i initially bought this vehicle it had been through previous owners and i have been trying to fix things but am a single mother of three and i just can afford much but i happen to put the yr make and model into the google one day and notice of recalls and as i read the same as whats i had already noticed had already happened and i figured i could live with it but i woke up one morning got in it and boom driving for ten minutes and boom all of a sudden i have no gears and then i get 1st and nothing else then eventually no reverse , so after almost getting stuck in the cold streets with a baby and my friend, i barely made it home i wanna know why such a nice vehicle is so fuct!!! And why did i get a bunk deal. Like i thought this was my break finally i wont have to worry so much about a vehicle just the other stuff, but to my dismay........... Here we are?????? And if you happen to contact me i can then explain in detail the destruction of this vehicle

My brothers mazda mpv 2001 van has a musty or freon leaking like smell not sure what but when air conditioning is on it's really bad is this harmful to breath for long periods of time for adults and children. I read up on manufacturer defects an no recall was assigned or brought up but several an i mean several complaints and recommended things to do about this ) smell issue) is know by the manufacturer company but om all my research an findings contain no evidence of dealships seeling these vehicle have no record of doing any replacement of parts or maintenance on effective moldy or freon smell maintenance coming from vents only replaced cabin filter on few occasions .The manufactures cause says different please investigate because of it is a mold issue and parts can be replaced because of bad design or even lack of maintenance done at dealership a recall should be the result.I will encourage the nutsa to try first try an get any certified anderson dealership to identify presents of mold coming from vents what they did resolve issue, what they replaced,how often and critical it is to do so because of mold or such unsafe fumes coming in through vents indirect contact with children over long periods of time. How many accounts have there beem or medical respitory faults subject to ever though public was not aware that these mazda vehicles are subject to mold after even a short time driving depending on humidity driving conditioms to me that should be manufacturer company default or recall .A mold issue iin a short or long term with any vehicle should be brought to serious..... Serious. Public attion. Another stupid question that could be asked if even serviced property how does the certified shop or dealership prove that all or 99% or whatevet the good or bad of air is being distributed throughout the vehicle.

Headlight malfunction mazda mpv 2001 while driving my mpv on city streets & freeways, the low beams flicker, or turn off, and the high beam indicator illuminates on dash board. However the high beams do work. When this occurs it persists both when stationary or in motion. The low beams will intermittently and momentarily turn on, later the "high beam" indicator will illuminate that the low beams off again. No reason. I cannot drive at dusk or at night due to the issue of never knowing if the low beams will work or not! If i drive with high beams all other motorists are honking or bothered. I have had the bulbs checked and replaced as well as the fuses, all check out good. An electrical specialist advised that i call mazda and enter complaint due to safety issues, because he cannot trace any faulty wiring. Troubleshooting this has been very costly. They had to review the schematic of the switches on the steering column as well as connections to headlights - no anomalies found. Mazda has responded to my request for assistance.

The spare tire winch mounted centrally under the passengers side second row seat will corrode and jam not allowing for access to the spare tire in a road side emergency.

Tl* the contact owns a 2001 mazda mpv. The contact stated that after starting the engine, the front passenger seat side airbag erroneously deployed as the passenger was getting into the vehicle. The passenger suffered an injured back during the incident. The contact indicated that during the deployment the air bag did not inflate but was visible from the side of the passenger seat. The vehicle was not diagnosed or repaired. The manufacturer was no notified of the failure. The failure mileage was 135,446.

On may the 5th 2014 while sitting still and the engine not running the passenger seat airbag deployed causing deep bruising and a cracked rib to my daughter who was sitting in the seat at the time. Since then i have been afraid to drive my vehicle which is a 2001 mazda mpv. This is the only vehicle that i have and can not afford another because i am disabled and draw ssi. Please help! *tr

Tl* the contact owns a 2001 mazda mpv. The contact was driving 55 mph when the contact crashed into another vehicle. The contact's vehicle then spun around and crashed into the same vehicle a second time from the front end. The contact stated that the air bags did not deploy. The contact and the other driver were injured and a police report was filed. The contact stated that the manufacturer refused to inspect the vehicle for the air bag failure. The contact referenced nhtsa campaign id number: 02v196000 (air bags: frontal) . The failure and the current mileages were 120,000. Updated 02/02/12*lj updated 02/08/12

Tl* the contact owns a 2001 mazda mpv. The contact was driving 35 mph when the front driver side air bag deployed independently. The contact was not injured by the air bag and the vehicle was taken to the dealer for inspection. The dealer advised that a rubber duck under the seat caused the air bag to deploy. The diagnostic test stated that something metal caused the air bag to deploy. The contact called manufacturer regarding the air bag failure and they stated there was nothing they could do regarding the repair. The contact stated the vehicle was unsafe to drive and feared that the front driver side air bag would deploy without warning. The failure mileage was 109,000.

Mazda mpv's oxygen sensor bank2, sensor1 wire circuit burned up. Have to replaced the oxygen sensor. There was no fire on my mpv but if i didn't have it fix fast it could cause fire. *tr

Common OBD-II Error Codes

• P0300 [1] Random/Multiple Cylinder Misfire Detected
• P0301 [1] Cylinder 1 Misfire Detected
• P0302 [1] Cylinder 2 Misfire Detected
• P0303 [1] Cylinder 3 Misfire Detected
• P0304 [1] Cylinder 4 Misfire Detected
• P0305 [1] Cylinder 5 Misfire Detected
• P0306 [1] Cylinder 6 Misfire Detected
• P0117 [1] Engine Coolant Temperature Sensor Circuit 1 Low Input
• P0171 [1] System too Lean (Bank 1)
• P0174 [1] System too Lean (Bank 2)
• P1173 [1] Fuel Rail Sensor In-Range Low Failure
• P0481 [1] Cooling Fan 2 Control Circuit Malfunction