2006 MAZDA B-series TruckMazda B-series Truck 2006

Vehicle Details: Recalls, Consumer Complaints, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2006 MAZDA B-series Truck.
The vehicle is described as a 4x2 Light Pickup.

ManufacturerKnown WMI(s)Fuel Type
MAZDAGasoline
MAZDA VIN Decoder

Use the box here to look up VINs from MAZDA as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2006 MAZDA B-series Truck produced?
     - The 2006 MAZDA B-series Truck is produced in St. Paul Minnesota, United States (usa).
  • Are there recalls for the 2006 MAZDA B-series Truck?
     - There are 13 recall(s) for the 2006 MAZDA B-series Truck, additional information is below.
  • What is the GVWR of a 2006 MAZDA B-series Truck?
     - The 2006 MAZDA B-series Truck has a GVWR of Class 1C: 4,001 - 5,000 lb (1,814 - 2,268 kg) lbs.
  • How much horsepower does the 2006 MAZDA B-series Truck have?
     - The 2006 MAZDA B-series Truck has 143 horsepower.
NHTSA Mandated Recalls
  • Recall 238488 [USA]: An incorrectly installed inflator may not properly inflate the passenger air bag, increasing the risk of injury during a crash.

  • Recall 139714 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could explode with sharp metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

  • Recall 139811 [USA]: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with sharp metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

  • Recall 131735 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

  • Recall 138886 [USA]: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants, potentially resulting in serious injury or death.

  • Recall 61236 [USA]: After a period of continuous use on the high speed setting, lack of grease on the output shaft gear may cause the gear teeth to distort or fracture during operation resulting in the loss of wiper function. inoperative wipers under inclement weather conditions could cause a crash due to impaired visibility.

  • Recall 2018467 [Canada]: Airbag

  • Recall 2018466 [Canada]: Airbag

  • Recall 2018086 [Canada]: Airbag

  • Recall 2018085 [Canada]: Airbag

  • Recall 2016050 [Canada]: Airbag

  • Recall 2015246 [Canada]: Airbag

  • Recall 2005353 [Canada]: Other

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SA-011-24 - STEERING: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
  • 09-016-23 - ELECTRICAL SYSTEM: Speedometer replacement procedure
  • 02-004-22a - SUSPENSION: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • 01-010-22 - POWER TRAIN: Some customers may experience a squeaking noise may be heard from the exhaust manifold when the idle speed drops from fast idle to normal idle speed during cold start. This is caused by a variable valve being stuck in the closed position. W
  • 09-024-22 - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.
  • 01-006-22 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in st
  • 0900416 - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:MATERIALS:FLOORING: Proper usage of driver's floor mat.
  • 02-004-22 - SUSPENSION: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • 01-003/22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The mazda dca-8000 is required for all warranty battery testing. If the mazda dca-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
  • SA-014-22 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Accessory instructions can be found on onemazda under dealer resources - parts & accessories.
  • 00-001-22 - POWER TRAIN: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manu
  • 05-002-21-3854 - POWER TRAIN: Automatic transmission/transaxle cooler and lines flushing procedure: automatic transaxle/transmission (a/t) oil cooler and lines must be power flushed completely before an overhauled or replacement a/t is installed (except skyactiv-drive)
  • 01-006-21-3779b - ELECTRICAL SYSTEM: Battery maintenance: this service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost.
  • 01-006-21-3779a - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 09-025-21-3824 - EQUIPMENT: This service bulletin provides information regarding the proper use of the driverâ¿¿s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided w
  • SA-041-21 - EQUIPMENT: Accessory instructions can be found on onemazda under dealer resources - parts & accessories. The links provided below can be used for quick access: for 2016 models and newer: note: instructions are found under the "attachments" section onc
  • SSPB3 - AIR BAGS: Subject: ** update** - takata inflator special service program (extended warranty) special service program sspb3: in december 2017 special service program sspb3 - takata inflator extended warranty was announced. The extended warranty was a
  • 01-006-21-3779 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 01-005-21-3778 - ELECTRICAL SYSTEM: The mazda dca-8000pm is required for all warranty battery testing. If the mazda dca-8000pm is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to t
  • 09-002-21-3770 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer
  • 00-001-21-3768 - WHEELS: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manu
  • MT-002-20 - WHEELS: New carb regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including mazda dealerships) in california effective september 1, 2010.
  • 09-006-20-3673a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 00-001-20-3689 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manu
  • 09-006-20-3673 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-003-20-3671 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealerâ¿¿s responsibility
  • 02-002-20-3651 - EQUIPMENT ADAPTIVE/MOBILITY: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • SA-013-19 - EQUIPMENT: Mazda ids inoperative with vcm-ii license expiration message - if you encounter an ids inoperative problem with vcm-ii license expiration message, follow the instructions below: 1. Click here to download the resetting tool to your pc deskto
  • 00-003-19-3583 - EQUIPMENT: In support of the new mrt distribution, mazda will ship to dealers a new dual purpose diagnostic leak detector beginning march, 2019. Training videos will be posted to mgss shortly and workshop manual procedures will be revised gradually.
  • 09-009-19-3566 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
  • 09-005-19-3562 - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 09-002-19-3554 - EQUIPMENT ADAPTIVE/MOBILITY: This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with pro
  • 02-001-19-3550 - SUSPENSION: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • 01-004-19-3558 - ENGINE AND ENGINE COOLING: On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
  • 01-002-19-3552 - ELECTRICAL SYSTEM: The mazda gr8-1291 is required for all warranty battery testing. If the mazda gr8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
  • 01-001-19-3551 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 00-002-19-3561 - BRAKES (PWS): Mazda north american operations has approved an additional on-car brake lathe as an option for mnao authorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorized equipment program. Note: accu-turn is still an ap
  • 00-001-19-3560 - EQUIPMENT: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
  • 09-034-18-3430a - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
  • 09-014-18-3443a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the mazda pocket paint guide are available for order on mazda e-
  • 00-003-18-3480a - EQUIPMENT: Mazda north american operations has approved an additional on-car brake lathe as an option for mnao authorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorized equipment program. Note: accu-turn is still an ap
  • 00-001-18-3446a - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's man
  • 01-016-18-3522 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not a
  • 09-034-18-3430 - VEHICLE SPEED CONTROL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
  • 00-003-18-3480 - BRAKES (PWS): Mazda north american operations has approved an additional on-car brake lathe as an option for mnaoauthorized equipment. The pro-cut on-car brake lathe has been added to the mnao authorizedequipment program.Note: accu-turn is still an appro
  • 05-001-18-3453 - EQUIPMENT: Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission. Note: atf m-v (type m5) is not the same fluid as merconv or merc
  • 02-006-18-3449 - SUSPENSION:REAR:SHOCK ABSORBER: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • 01-009-18-3452 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: The mazda gr8-1291 is required for all warranty battery testing. If the mazda gr8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to test
  • 01-008-18-3451 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 09-019-18-3450 - EQUIPMENT ADAPTIVE/MOBILITY: This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
  • 09-014-18-3443 - STRUCTURE: When encountering a vehicle with paint damage, refer to the "mazda pocket paint guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • SA-068-17 - AIR BAGS: Stopper plates for air bag module connectors have been established as new service parts. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do
  • 09-035-17-3080 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer?S responsibility to co
  • SA-061-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In an effort to achieve a higher level of customer experience and retain the value of mazda's vehicles, mnao warranty operations is 2017 mazda north american operations, u.S.A. Allowing all mazda dealers to utilize a third party, specmo en
  • 05-001-16-3128 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.Note: atf m-v (type m5) is not the same fluid as merconv or merc
  • 09-034-14-2956 - EQUIPMENT ADAPTIVE/MOBILITY: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.Note:mazda vehicles are manufactured with tamper-proof speedometers.When a speedometer is replaced, the new speedometer will read zero
  • 09-027-14-2935 - EQUIPMENT ADAPTIVE/MOBILITY: This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with p
  • 00-002-14-2936 - EQUIPMENT: Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we
  • 00-004-12-2741 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owners manu
  • 00-001-13-2748A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owners manu
  • 05-002-13-2777 - POWER TRAIN:AUTOMATIC TRANSMISSION: Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.Note:atf m-v (type m5) is not the same fluid as merconv or merco
  • 05-002-13-2777A - POWER TRAIN:MANUAL TRANSMISSION:LUBRICANT: Always be sure to use the correct automatic transmission fluid when replacing atf. Using the wrong atf may cause shift quality complaints or may even damage the transmission.Note:atf m-v (type m5) is not the same fluid as merconv or merco
  • 09-005-13-2781 - EQUIPMENT: This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any poten-tial interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with
  • 02-001-13-2752 - EQUIPMENT: Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow th
  • 00-001-13-2748 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owners manu
  • 00-004/12 - ENGINE (PWS): Summary to be provided on a future date.
  • SB-09-005-13 - EQUIPMENT ADAPTIVE/MOBILITY: Mazda: on some vehicles, to avoid potential interference of foot placed on pedals, information is provided regarding proper use, and placement, of driver's floor mat. Various models and model years. *pe
  • 0102206 - SUSPENSION:FRONT: Front crankshaft bolt service warning. *nj
  • 0101307 - ENGINE AND ENGINE COOLING:ENGINE: No start/loss of engine timings/scraping noise at crankshaft pulley/possible engine damage. *kb
  • 0500106 - POWER TRAIN:AUTOMATIC TRANSMISSION: Neutral tow capability - service kit requirements - service tip. *tt
  • 0900206 - VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR: Limited or restricted inward movement of exterior rear view mirror glass. *tt
  • 0901703 - ELECTRICAL SYSTEM:WIRING: Electrical - wiring - soldering and crimping repairs - service tip. *tt
  • 0400504 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM: Grabbing condition from rear drum brakes. *tt updated 4/25/08. *nj
NHTSA decoded information from VIN

138 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Air Bag Loc Front1st Row (Driver and Passenger)
Body Cab TypeRegular
Body ClassPickup
Brake System TypeHydraulic
DisplacementCC2300.0
DisplacementCI140.35461141788
DisplacementL2.3
Doors2
Drive Type4x2
Engine ConfigurationIn-Line
Engine Cylinders4
EngineHP143
EngineKW106.6351
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryGasoline
GVWRClass 1C: 4,001 - 5,000 lb (1,814 - 2,268 kg)
MakeMAZDA
MakeID473
ManufacturerFORD MOTOR COMPANY, USA
Manufacturer Id976
ModelB-Series
ModelID2741
Model Year2006
NCSA Body TypeLight Pickup
NCSA MakeMazda
NCSA ModelPickup/ B-Series Pickup
Other Engine InfoEFI
Other Restraint System InfoSec. Gen. Air Bags
Plant CityST. PAUL
Plant CountryUNITED STATES (USA)
Plant StateMINNESOTA
Seat Belts AllManual
VIN4F4YR12D46PM06031
Vehicle TypeTRUCK
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20180803

Takata recall

NoNoN NoneNone20180630

Takata inflators and other, they keep sending me cards and letters, which warn me not to drive my car. Then they say they will tow my car and provide me with a other car. But their not doing anything. I'm very concerned at this point and i need them to take action and help me.

NoNoN NoneNone20180610

Takata recall. The mazda dealership knoxville tn has the air bags available but they say i should drive the vehicle to the dealership. They have also told me the vehicle is not safe to drive. I asked that they tow the vehicle to their shop but they refuse. Is there any help you can give on this matter?

NoNoN NoneNone20170816

Takata recall

NoNoN NoneNone20170228

Tl* takata recall. The contact owns a 2006 mazda b-series truck. The contact received notification of nhtsa campaign number: 16v048000 (air bags) however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The cavalier mazda dealer was contacted and confirmed that the parts were not available for the recall remedy due to parts being on back order. The manufacturer was not made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Parts distribution disconnect.

NoNoN NoneNone20160308

Tl* takata recall. The contact owns a 2006 mazda b23s. The contact received notification of nhtsa campaign number: 16v048000 (air bags) and stated that the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

NoNoN NoneNone20160128

Tl* takata recall. The contact owns a 2006 mazda b23s. The contact received notification of nhtsa campaign numbers: 16v048000 and 15v346000 (air bags). The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact called tracy mazda (2680 auto plaza dr, tracy, ca 95304, (209) 820-7800) where it was confirmed that the parts were not available for the recall remedy. The manufacturer was not notified. The contact had not experienced a failure. Vin tool confirms parts not available. Parts distribution disconnect.

NoNoN NoneNone20060425

This vehicle was smoldering burning and smoke without fire. I have taken my vehicle in for repairs 5 times for the transmission and other related issues. This vehicle as had a new transmission added within two months of ownership and it still leaks. The brakes pads wear to fast. *nm

Read and Submit Vehicle Complaints -- 8+ complaints filed
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
4F4YR46U56PM005112006B-SeriesST. PAUL MINNESOTA, UNITED STATES (USA)
4F4YR12D46PM060312006B-SeriesST. PAUL MINNESOTA, UNITED STATES (USA)

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.