09-036-15-3081

Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
© 2015 Mazda Motor of America, Inc.
Subject:
BSM RADAR AIMING CANNOT BE PERFORMED AFTER RIGHT-SIDE BSM
CONTROL MODULE REPLACEMENT
Bulletin No:
09-036/15
Last Issued:
09/08/2015
MULTI-MODEL - BSM RADAR AIMING CANNOT BE PERFORMED AFTER RIGHT-SIDE BSM CONTROL
MODULE REPLACEMENT
APPLICABLE MODEL(S)/VINS
2016 Mazda2
2016 CX-3
2016 MX-5
SERVICE NOTE
If the right-side BSM control module requires replacement for any repair, also replace the left side BSM control
module to complete the radar aiming procedure (it is OK to replace the left BSM alone).
REASON
If the right-side BSM control module is replaced alone, “Automatic Configuration” is not performed due to a program error in the module. Because of this, the required “BSM Radar Aiming” cannot be performed.
“Automatic Configuration” as well as ”BSM Radar Aiming” can be performed, if the left-side BSM control module
is replaced alone or together with the right-side BSM control module.
Replacement of BSM Control Module
Radar Aiming
Left Side
Right Side
Not Replaced
Replaced
Not Possible
Replaced
Not Replaced
Possible
Replaced
Replaced
Possible
NOTE: For details of “Automatic Configuration” and “BSM Radar Aiming”, refer to MS3 online or Workshop
Manual section 15-20:
• BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION
• BLIND SPOT MONITORING (BSM) RADAR AIMING
Page 1 of 2
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
Bulletin No: 09-036/15
Last Issued: 09/08/2015
© 2015 Mazda Motor of America, Inc.
The following part numbers apply to this service note.
Model
Part Number
Mazda2
DA6A-67-Y80A
CX-3
DB2R-67-Y80A
CX-5
N243-67-Y80A
Part Name
Note
BSM Control Module (R)
Also Replace BSM Control Module (L)
NOTE: Use GEPC with VIN for latest part number.
Page 2 of 2