K383NAS1
Service Bulletin Details
Public Details for: K383NAS1
Situation: an issue has been identified on a limited number of vehicles within the listed affected vehicle range where the software installed into the chassis control module (chcm) of vehicles with adaptive damping system suspension is inco
- 2017 -
Models from 2017
2017 JAGUAR F-PACE |
Page 1 of 3 TECHNICAL BULLETIN K383NAS1 15 AUG 2016 © Jaguar Land Rover North America, LLC NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle. Changes are highlighted in gray SECTION: 204-05 Service Action: Adaptive Damping Suspension AFFECTED VEHICLE RANGE: F-PACE (X761) Model Year: VIN: Assembly Plant: 2017 047563-051322 Vehicles With: Adaptive Damping Solihull MARKETS: NAS CONDITION SUMMARY: Situation: An issue has been identified on a limited number of vehicles within the listed Affected Vehicle Range where the software installed into the Chassis Control Module (CHCM) of vehicles with Adaptive Damping system suspension is incorrectly specified. Action: Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Service Instruction detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles already in the hands of customers should be updated at the next available opportunity. PARTS: No parts required. SPECIAL TOOLS: Jaguar Land Rover-approved diagnostic tool with latest SDD software and Calibration File http://topix.jaguar.jlrext.com/topix/service/procedure/678049/ODYSSEY_FSA/G2010387/e... 9/2/2016 Page 2 of 3 Jaguar Land Rover-approved Midtronics Battery Power Supply WARRANTY: NOTE: Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. At the time of confirming a booking for vehicle repair, ensure that all outstanding Recalls and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit. Warranty claims must be submitted quoting Program Code K383 together with the relevant Option Code from the table. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken. This program is valid for a limited time only. Warranty claims with a repair date prior to the 31 August 2018 closure date must be submitted or payment within 30 calendar days of completion of the repair. Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time. PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS/SUNDRY QTY./VALUE CODE K383 B Configure the Chassis control module 05.10.20 0.20 - - K383 C Configure the Chassis control module Drive in/drive out 05.10.20 0.20 10.10.10 0.20 - - http://topix.jaguar.jlrext.com/topix/service/procedure/678049/ODYSSEY_FSA/G2010387/e... 9/2/2016 Page 3 of 3 Normal Warranty policies and procedures apply. SERVICE INSTRUCTION: CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during diagnosis / module programming. CAUTION: Ensure all ignition ON/OFF requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle. NOTE: The Jaguar Land Rover-approved diagnostic tool must be loaded with SDD146.03 v.244 or later. 1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery. 2. Turn ignition ON (engine not running). 3. Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session. 4. Follow the on-screen prompts, allowing the diagnostic tool to read the VIN and identify the vehicle and initiating the data collect sequence. 5. Select Diagnosis from the Session Type screen. 6. Select the Selected Symptoms tab, and then select the following: • Chassis - Suspension system - Vehicle dynamic suspension 7. Read and close any publication from the list of recommended candidates to expose the Extras tab. 8. Select the Extras tab. 9. From the Recommendations tab, select Run to perform the 'Configure existing module - Chassis control module' option. 10. Follow all on-screen instructions to complete this task, ensuring all Diagnostic Trouble Codes (DTC) are cleared. 11. When all tasks are complete, select the Session tab and then select the Close Session option. 12. Disconnect the diagnostic tool and battery power supply from the vehicle. http://topix.jaguar.jlrext.com/topix/service/procedure/678049/ODYSSEY_FSA/G2010387/e... 9/2/2016