01-010-14-2896
Service Bulletin Details
Public Details for: 01-010-14-2896
Some vehicles may experience the mil on with dtc P0191:00 (fuel pressure sensor circuit range/perfor-mance problem) stored in memory. This is caused by the high pressure fuel pump not generating the target fuel pressure (due to a manufactur
Models from 2014
2014 MAZDA CX-5 |
2014 MAZDA MAZDA3 |
2014 MAZDA MAZDA6 |
Models from 2013
2013 MAZDA CX-5 |
2013 MAZDA MAZDA3 |
Models from 2012
2012 MAZDA MAZDA3 |
Service Bulletin Mazda North American Operations Irvine, CA 92618-2922 © 2014 Mazda Motor of America, Inc. Subject: Bulletin No: 01-010/14 Last Issued: 04/07/2014 MIL ON WITH DTC P0191:00 MULTI-MODEL (WITH SKYACTIV 2.0L/2.5L) - MIL ON WITH DTC P0191:00 APPLICABLE MODEL(S)/VINS 2012-13 Mazda3 (with SKYACTIV 2.0L) 2013-14 CX-5 vehicles with VINs lower than JM3KE******420619 (produced before December 1, 2013) 2014 Mazda3 vehicles with VINs lower than JM1BM******154277 (produced before December 1, 2013) 2014 Mazda6 vehicles with VINs lower than JM1GJ******162756 (produced before December 1, 2013) DESCRIPTION Some vehicles may experience the MIL on with DTC P0191:00 (Fuel pressure sensor circuit range/performance problem) stored in memory. This is caused by the high pressure fuel pump not generating the target fuel pressure (due to a manufacturing error of the inner parts). To correct the problem, production control has been improved. Customers having this concern should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE 1. Verify customer concern. 2. Replace the high pressure fuel pump with a modified one according to the Workshop Manual. 3. Replace the high pressure fuel pump (A: fuel pump; B: fuel pipe; C: rubber seal) with a modified one according to the instructions on MS3 online or the Workshop Manual (section 01-14 HIGH PRESSURE FUEL PUMP REMOVAL/INSTALLATION). 4. Verify repair. Page 1 of 2 CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/ equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies, customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means, electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in writing. Bulletin No: 01-010/14 Last Issued: 04/07/2014 © 2014 Mazda Motor of America, Inc. PART(S) INFORMATION Part Number Description Qty. Notes PE18-20-3F0 Fuel Pump 1 All models PE01-13-290D Fuel Pipe 1 2.0L 1 2.5L 1 All models PY01-13-290A PF01-13-555 Rubber Seal WARRANTY INFORMATION NOTE: • • • This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. This repair will be covered under Mazda’s Federal Emission Warranty (long term) or CA PZEV Emission Warranty. Additional diagnostic time cannot be claimed for this repair. Warranty Type A Symptom Code 6X Damage Code 9W Part Number Main Cause Quantity Operation Number / Labor Hours: PE18-20-3F0 1 XXK61ARX/ 1.0 Hrs. (2012-13 Mazda3) XXK61ARX/ 0.8 Hrs. (CX-5, Mazda6, 2014 Mazda3) Page 2 of 2