SSM71278

Service Bulletin Details

Public Details for: SSM71278

"issue: a customer may report the vehicle steering feels heavy potentially accompanied by visual or audible warnings through the instrument pack. The following dtcs may also be logged: epas dtcs logged: -B1304-16: electronic power assist


- 2014 - 2013 -

TOPix - SSM71278 - Vehicle Steering Feels Heavy
Page 1 of 1
1Ground Points.pdf
I
Reference SSM71278
M d
0
Range Rover Sport / L494
I
e s Range Rover (All New) / L405
Title
Category
Last modified
Symptom
Vehicle Steering Feels Heavy
Chassis
06-Feb-2014 00:00:00
303000 Steering/Handling
Issue:
A customer may report the vehicle steering feels heavy
potentially accompanied by visual or audible warnings
through the instrument pack. The following DTCs may
also be logged:
EPAS DTCs logged:
-B1304-16: Electronic Power Assisted Steering (EPAS)
system circuit voltage below threshold
-U3001-00: Power Steering Control Module (PSCM)
system improper shutdown.
These may be accompanied by:
-U0001-87 I 88 High speed CAN bus invalid serial data
received/ missing message.
CHCM DTCs logged:
-U0131-00 CHassis Control Module (CHCM) lost comms
with PSCM.
-U3003-62 Battery voltage signal compare failure.
-U0420-68 CHCM invalid data received from PSCM.
Content Cause:
This may be caused by:
-Low battery voltage.
-Wiring harness issue (short/ open circuit, high
resistance).
-High resistance at EPAS earth terminal G1D132 and or
G4D178, (see attached diagram).
Action:
-Using SOD please check the CHCM and EPAS for any
OTC
-Confirm the vehicle battery condition is OK
-Confirm ignition and main feed fuses are secure.
-Check and clean the earth terminals (G1D132 &
G4D178), replacing the washer if found to be corroded
and re-tighten retaining fixings.
-Refer to the electrical circuit diagrams (211.02 in TOPlx)
and check the power steering control module power feed
circuit for short circuit to ground, open circuit, high
resistance.
http://topix.landrover.jlrint.com/topix/service/archive/45 3 23 7/index
2/20/2014


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.