SSM 72352

Service Bulletin Details

Public Details for: SSM 72352

"issue a number of l550 discovery sport headlinings have been supplied that may require modification to allow the fitment of the fan harness, by cutting out a square hole in the headlining. Cause a modification to the part specificatio


- 2015 -

Special Service Message
NOTE: A Special Service Message is a formal communication issued by Land Rover and carries
the same importance of a Technical Service Bulletin. An SSM is a quick method of
communicating "Need To Know" information to the technical service community. SSM's may
be issued in advance of a technical bulletin or may be the only communication on a given
topic. All information contained in Land Rover technical communications are intended for
use by trained, professional technicians with the knowledge, tools, and equipment required
to complete the procedure correctly and safely. It informs the Technicians of conditions that
may occur on some vehicles, or provides information that could assist in correct vehicle and
diagnostic service.
SSM 72352 - L550 Headliner Modification for Fan Harness
Models : LC - Discovery Sport
Engineer Campbell Andy
Name :
Last 2 4 - 0 8 - 2 0 1 5 0 9 : 1 2 : 1 7
Modified :
Category : Body
Symptom : 105000 Roof Options
Content : I s s u e
A number of L550 Discovery Sport headlining’s have
been supplied that may require modification to allow
the fitment of the fan harness, by cutting out a square
hole in the headlining.
Cause
A modification to the part specification after release.
Action
A small square section of the headlining will need to be
cut out with a suitable tool (eg. knife) to allow the fan
harness to pass through.
Please see attachment Figure 1, for details and
dimensions of the modification required.
Note: the area will be covered by the body of the
rear view mirror when complete - Please see
attachment fig 2.
File : h e a d l i n i n g m o d . p d f
Jaguar Land Rover Limited 2000 - 2015 (Rel. 2621)
Fig 1
Fig 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.