SSM72629

TOPix - SSM72629 - Amber Park Brake Warning Light Illumintaed After ABS Module...
Reference
SSM72629
Models
Discovery Sport/ LSS0
Page I of 2
Range Rover Evoque / L538
Title
Amber Park Brake Warning Light lllumintaed After ABS Module Update
Category
Diagnostic Software Hardware
Last modified
12-Feb-2016 00:00:00
Symptom
000101 Diagnostic Concerns
Content
Issue:
Upon completion of a software update to the Anti-Lock Brake (ABS) module, an amber
park brake warning lamp is illuminated on the Instrument Cluster (IC) with no Diagnostic
Trouble Codes (DTC's) stored in the ABS module.
Cause:
A concern has been identified with the latest ABS software causing the warning lamp to
be illuminated.
It is crucial that the ABS module is checked for DTCs first, as the warning lamp may be
illuminated due to a vehicle concern.
Any DTCs stored in the ABS module should be investigated fully before completing the
instructions in the 'Action' section below.
Action:
This workaround will load a software file to SOD using the Manual Patch Update
process.
WARNING; DO NOT Restart the PC until the manual patch has been used as the
manual patch is removed on restart of the PC.
1. Login to SOD.
2. Select 'Continue' on the SOD Warning screen.
3. Select 'Settings' tab.
4. Select 'System Utilities'.
5. Select 'Manual Patch Update'.
6. A pop-up will be displayed for Manual patch selection dialog box.
7. Enter 'MP_L_L0019' in the Manual patch selection dialog box.
8. Select 'OK'.
9. The 'Software Management Wizard' will then download the fix file.
http://topix.landrover.j lrext. com/topix/service/archive/620919/index
3/1/2016
TOPix - SSM72629 - Amber Park Brake Warning Light Illumintaed After ABS Module...
Page 2 of 2
10. The Manual patch update information pop up will ask 'Do you want to install the
update now?' Select 'OK'.
11. Select 'OK' when the message 'Please shut down SOD before continuing' is
displayed. DO NOT SHUT DOWN THE PC.
12. MP_L_L0019 pop up message will be displayed with progress bar and will
disappear when complete. DO NOT select 'Cancel'.
13. Select 'OK' in the Manual patch update information pop up.
14. Close the Internet Explorer Window where the SOD program runs.
15. Start a new SOD session.
16. Program the Anti-Lock Brake module (ABS).
17. Recheck for DTCs and investigate as necessary.
18. Close the SDD session.
19. Restart the SDD machine.
If this Manual patch fails to correct the concern then a Technical Assistance should be
submitted.
http://topix.landrover.j lrext. com/topix/service/archive/620919/index
3/1/2016