TSB170042-040320

Service Bulletin Details

Public Details for: TSB170042-040320

This technical service bulletin describes the verification and resolution of electrical arcing through ignition coil extension in area where silicone extension tube is connected to spark plug boot adapter can cause visible damage and burn m


- 9999 -

Improper Removal of Ignition Coil Extension Dielectric Heat Shrink
Page 1 of 4
Technical Service Bulletin Number
TSB170042
Technical Service Bulletin
Subject
Improper Removal of Ignition Coil Extension Dielectric Heat Shrink
Warranty Statement
The information in this document has no effect on present warranty coverage or repair
practices, nor does it authorize TRP or Campaign actions.
Contents
Product Affected
• ISX12 G CM2180 EJ
Issue
Ignition coil extension dielectric heat shrink is improperly being removed prior to installation
of ignition coil. Removing ignition coil extension dielectric heat shrink will reduce life of
ignition coil extension.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2017/tsb170042.html
4/20/2017
Improper Removal of Ignition Coil Extension Dielectric Heat Shrink
Page 2 of 4
Figure 1, Example of Dielectric Heat Shrink Installed on Ignition Coil Extension.
Verification
Electrical arcing through ignition coil extension in area where silicone extension tube is
connected to spark plug boot adapter can cause visible damage and burn marks to ignition
coil extension tube. See Figure 2 and Figure 3 below.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2017/tsb170042.html
4/20/2017
Improper Removal of Ignition Coil Extension Dielectric Heat Shrink
Page 3 of 4
Figure 2, Example of Signs of Arching on Ignition Coil.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2017/tsb170042.html
4/20/2017
Improper Removal of Ignition Coil Extension Dielectric Heat Shrink
Page 4 of 4
Figure 3, Magnified Example of Signs of Arching on Ignition Coil.
Resolution
Never remove clear dielectric heat shrink wrap from ignition coil extension.
Production Status
Table 1, Production Information
ESN First
Build Date*
Engine Plant
75043591
26 June 2015
Jamestown Engine Plant
*Engine build date can be found on the engine dataplate.
Publications Affected
Table 2, Publications Affected
Manual
Type
Engine
Bulletin
Number
Procedure Title
Procedure
Service
Manual
ISX12 G
CM2180 EJ
4310682
Ignition Coil (Non
Shielded)
Refer to Procedure
13
013-012
Section
Document History
Date
2017-3-30
Details
Module Created
Last Modified: 03-Apr-2017
Copyright © 2000-2010 Cummins Inc. All rights reserved.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2017/tsb170042.html
4/20/2017


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.