JTB00516NAS1

Page 1 of 3
TECHNICAL BULLETIN
JTB00516NAS1
01 NOV 2016
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge,
tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on
some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by
'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an
authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 303-14
Engine MIL Illuminated With DTC P0341-91 Stored
AFFECTED VEHICLE RANGE:
XE (X760)
Model Year:
VIN:
Assembly
Plant:
XF (X260)
Model Year:
VIN:
Assembly
Plant:
2017
923882-950318
INGENIUM I4 2.0L Diesel
Solihull
2017
Y17976-Y29703
INGENIUM I4 2.0L Diesel
Castle Bromwich
MARKETS:
NAS
CONDITION SUMMARY:
Situation: The engine Malfunction Indicator Lamp (MIL) may be illuminated with Diagnostic Trouble Code
(DTC) P0341-91 stored in the Powertrain Control Module (PCM).
Cause: This may be caused by the DTC P0341-91 parameters being too sensitive.
Action: Should a Customer express this concern, follow the Service Instruction below.
PARTS:
No Parts Required
TOOLS:
Jaguar Land Rover-approved Midtronics
battery power supply
http://topix.jaguar.jlrext.com/topix/service/document/705134?highlight=JTB00516NAS1
11/11/2016
Page 2 of 3
Jaguar Land Rover-approved diagnostic tool
with latest SDD software, Calibration File,
and InControl© Touch Pro™ Software
WARRANTY:
NOTE: Use DDW to check for Recall, Service Action, or Update Prior to Sale notice eligibility
requiring a Powertrain Control Module (PCM) software update. If eligible, perform and claim the
update as per that program.
NOTE: Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the
latest repair time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal
part number with a quantity of zero.
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Configure existing Powertrain Control
Module (PCM)
86.99.26
0.2
04
T4N8046
NOTE: Normal Warranty procedures apply.
SERVICE INSTRUCTION:
http://topix.jaguar.jlrext.com/topix/service/document/705134?highlight=JTB00516NAS1
11/11/2016
Page 3 of 3
CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to
the vehicle battery during diagnosis / module programming.
CAUTION: Make sure all ignition ON/OFF requests are carried out; failure to perform these steps
may cause damage to control modules in the vehicle.
NOTE: The Jaguar Land Rover-approved diagnostic tool must be loaded with SDD146.07 v.248 (or
later).
NOTE: Use DDW to check for Recall, Service Action, or Update Prior to Sale notice eligibility
requiring a Powertrain Control Module (PCM) software update. If eligible, perform and claim the update
as per that program.
1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
NOTE:
2. Switch the ignition ON (engine not running).
3. Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session.
4. Follow the on-screen prompts, allowing the diagnostic tool to read the VIN, identify the vehicle, and
initiating the data collect sequence.
5. Select Diagnosis from the Session Type screen.
6. Select the Selected Symptoms tab and then select:
• Electrical - Instruments - Warning lamps - Engine malfunction lamp - Lamp illuminated
7. Select continue.
8. Select the Recommendations tab.
9. Select Run to perform the 'Configure existing module - Powertrain control module' option.
10. Follow all on-screen instructions to complete this task, ensuring all Diagnostic Trouble Codes (DTC) are
cleared.
11. When all tasks are complete, select the Session tab and then select the Close Session option.
12. Disconnect the diagnostic tool and battery power supply from the vehicle.
http://topix.jaguar.jlrext.com/topix/service/document/705134?highlight=JTB00516NAS1
11/11/2016