T-SB-0158-14 Rev
Service Bulletin Details
Public Details for: T-SB-0158-14 Rev
Tsb: some 2006 - 2013 model year vehicles equipped with 2az-fe or 2az-fxe engines may exhibit engine oil consumption. The piston assembly has been changed to minimize oil consumption. Use the inspection procedure in this bulletin to confirm
- 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 -
Models from 2013
2013 TOYOTA MATRIX |
Models from 2012
2012 TOYOTA COROLLA |
2012 TOYOTA MATRIX |
Models from 2008
2008 TOYOTA CAMRY |
2008 TOYOTA CAMRY HYBRID |
2008 TOYOTA CAMRY SOLARA |
2008 TOYOTA RAV4 |
Models from 2007
2007 TOYOTA CAMRY |
2007 TOYOTA CAMRY HYBRID |
2007 TOYOTA CAMRY SOLARA |
2007 TOYOTA RAV4 |
Models from 2006
2006 TOYOTA RAV4 |
T-SB-0158-14 Rev2 December 12, 2014 2AZ Engine Oil Consumption Inspection Procedure Service Category Engine/Hybrid System Section Lubrication Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2007 – 2011 Camry HV Engine(s): 2AZ VDS(s): BB3EK, BB46K 2007 – 2009 Camry Engine(s): 2AZ VDS(s): BE46K 2009 – 2012 Corolla Engine(s): 2AZ VDS(s): BE40E 2009 – 2013 Matrix Engine(s): 2AZ VDS(s): GE40E, KE40E, KE4EE, LE40E, LE4EE, ME4EE 2006 – 2008 RAV4 Engine(s): 2AZ VDS(s): BD31V, BD32V, BD33V, BD34V, BD35V, ZD31V, ZD32V, ZD33V, ZD34V, ZD35V 2007 – 2008 Solara Engine(s): 2AZ VDS(s): CE30P REVISION NOTICE April 27, 2015 Rev2: • Applicability has been updated to include 2010 – 2012 model year Corolla and 2010 – 2013 model year Matrix vehicles. • The Production Change Information section has been removed. • The Parts Information, Inspection Procedure, and Engine Oil Consumption Test sections have been updated. March 13, 2015 Rev1: • The Title, Required Tools & Equipment, Inspection Procedure, and Engine Oil Consumption Test sections have been updated. • The Parts Information section has been added. Any previous printed versions of this bulletin should be discarded. © 2015 Toyota Motor Sales, USA Page 1 of 6 T-SB-0158-14 Rev2 December 12, 2014 Page 2 of 6 2AZ Engine Oil Consumption Inspection Procedure Introduction Some 2006 – 2013 model year vehicles equipped with 2AZ-FE or 2AZ-FXE engines may exhibit engine oil consumption. The piston assembly has been changed to minimize oil consumption. Use the Inspection Procedure in this bulletin to confirm this condition. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Parts Information PART NUMBER PART NAME QTY 00411-14001-1 Inspection Labels 1 Roll* * 100 labels per roll. NOTE Toyota requires specific security seals to be used for this activity (shown to the right). Contact the Materials Distribution Center (MDC) for ordering information. Labels may be ordered in packages of 100 from the Materials Distribution Center (MDC) through Dealer Daily – Dealer Support Materials Orders or by visiting www.toyotamdc.com. Required Tools & Equipment REQUIRED TOOLS & MATERIAL QTY ILSAC GF-4 Multi-grade SAE 0W-20 or 5W-20 3.0 U.S. qts (2.8 liters) © 2015 Toyota Motor Sales, USA T-SB-0158-14 Rev2 December 12, 2014 Page 3 of 6 2AZ Engine Oil Consumption Inspection Procedure Inspection Procedure NOTE • In some cases, a P030# (cylinder # misfire detected) DTC may also be set as a result of oil consumption. • This bulletin does NOT cover the cost of an oil change. If the vehicle is approaching Toyota recommended service interval mileage at the start of the test, recommend an oil change at customer cost to ensure valid test results. Confirm Engine Oil Consumption Condition 1. Confirm customer complaint and request for Engine Oil Consumption Test. 2. Fill oil to “Full” mark shown on dipstick. 3. Mark the following locations to prevent/indicate tampering during the test. • Dipstick • Oil Drain Plug • Fill Cap • Oil Cooler Line • Oil Filter NOTE Use the required Inspection Labels (MDC P/N 00411-14001-1) on the locations specified above. Figure 1. Oil Pan with Inspection Label Applied © 2015 Toyota Motor Sales, USA T-SB-0158-14 Rev2 December 12, 2014 Page 4 of 6 2AZ Engine Oil Consumption Inspection Procedure Inspection Procedure (Continued) Confirm Engine Oil Consumption Condition (Continued) Figure 2. Indication of Inspection Label Removal 4. Complete Section A of the “Engine Oil Consumption Test” at the end of this bulletin. NOTE Attach the completed “Engine Oil Consumption Test” to Repair Order. It will be used later in the Inspection Procedure. This form will also be required for warranty submission. 5. Return the vehicle to the customer advising them to return for inspection in 1100 – 1300 miles. NOTE Advise customer if they do NOT return inside the 1100 – 1300 mile range, the results will be void. © 2015 Toyota Motor Sales, USA T-SB-0158-14 Rev2 December 12, 2014 Page 5 of 6 2AZ Engine Oil Consumption Inspection Procedure Inspection Procedure (Continued) When Vehicle Returns after 1100 – 1300 Miles 1. Check the dipstick to confirm oil level is NOT full. • If full, this bulletin does NOT apply. Return the vehicle to the customer. • If NOT full, proceed to step 2. 2. Add 1 quart of oil from the quart container. IMPORTANT Fill engine with oil from 1 quart container to ensure accurate volume measurement. 3. Start engine and warm up to operating temperature. 4. Turn OFF the engine, and let the vehicle rest for 5 minutes. 5. Check the dipstick to confirm oil level. • If above full, this bulletin does NOT apply. Drain to the “Full” level, remove any tamper tape residue from the vehicle, and return to the customer. • If below full, follow the Repair Procedure outlined in Service Bulletin No. T-SB-0094-11, “2AZ Engine Oil Consumption Repair Procedure.” 6. Complete Section B of the “Engine Oil Consumption Test” at the end of this bulletin. © 2015 Toyota Motor Sales, USA Rev2 T-SB-0158-14 December 12, 2014 Page 6 of 6 2AZ Engine Oil Consumption Inspection Procedure Engine Oil Consumption Test COMPLETE AT TIME OF CUSTOMER COMPLAINT CLICK HERE for Interactive Form VIN: Model: Model Year: SECTION A: TESTING PROCEDURE PART 1 1. Mileage of Vehicle: 2. Were the required Inspection Labels used? (MDC P/N 00411-14001-1) 4. Please indicate oil level on Dipstick below after filling to "Full." NO 3. Please initial to indicate the following locations were marked to prevent/indicate tampering. Lo w F u ll a. Dipstick b. Oil Drain Plug c. Fill Cap d. Oil Cooler Line e. Oil Filter 5. I certify that the above information in Section A of this form is accurate. Print Name: Date: Signature: NOTE Keep this form attached to Repair Order. Additional information will be needed (Section B) when the vehicle returns. SECTION B: TESTING PROCEDURE PART 2 1. Mileage of Vehicle: NOTE If mileage difference between section A and B is NOT within 1100 – 1300 miles, test results are void. 2. Please initial to confirm the following locations were NOT tampered with. NOTE If locations below appear to be tampered with, write “Void” in box. 3. After adding 1 quart oil to vehicle (from quart container) indicate oil level below. Lo w a. Dipstick F u ll b. Oil Drain Plug c. Fill Cap d. Oil Cooler Line e. Oil Filter 4. I certify that the above information in Section B of this form is accurate. Print Name: Date: Signature: © 2015 Toyota Motor Sales, USA