PIP5141A

Bulletin No.: PIP5141A
Date: Sep-2013
Subject:
SES Lamp P06DD Set
Models:
2014 Chevrolet Silverado 1500
2014 GMC Sierra 1500
Built with RPOs 4.3L 5.3L 6.2L L83 L86 LV3
This PI was superseded to update admin details and add warranty info. Please discard PIP5141.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern
A vehicle may set a P06DD code with no drivability concerns.
The control functions in GDS do not work.
Recommendation/Instructions
If P06DA, P06DB, and P06DC are not set with the P06DD, gather the following information:
1.
Run the engine to 100 c or 214 degrees F.
2.
Check the oil pressure at idle with GDS.
3.
Run the engine at 1100 rpm for 45 seconds and record the oil pressure.
4.
Run the engine at 3500 rpm for 45 seconds and record the oil pressure.
5.
Remove terminal 59 D BL wire from the X2 ECM connector with the engine at 100 c or 214 f.
5.1. Run the engine at 1400 rpm jump the terminal to ground 10 times on the 11th time record the reading grounded and not grounded.
5.2. Run the engine at 2500 rpm jump the terminal to ground 10 times on the 11th time record the reading grounded and not grounded.
Record all readings then contact GM TAC.
Warranty Information
For vehicles repaired under warranty use:
Labor Operation
Description
Labor Time
*4080108
Cycle/Energize Camshaft Position Actuator Solenoid Valve
0.4 hr
* This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the
remaining steps do not need to be performed.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may
occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that
your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
1
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
2