PIP5274B

Service Bulletin Details

Public Details for: PIP5274B

This preliminary information communication advises the technician to call general motors technical assistance center if the customer has a malfunction indicator lamp on and there is a diagnostic trouble code P16F3 set in the transmission co


- 2015 -

Bulletin No.: PIP5274B
Date: May-2015
Subject:
Illuminated MIL. DTC P16F3 May Be Set As An Active Or History Code In The TCM
Models:
2015 Cadillac Escalade, Escalade ESV
2015 Chevrolet Corvette, Silverado
2015 GMC Sierra, Yukon, Yukon XL
Equipped with 8L90 Automatic Transmission (RPO M5U)
This PI was superseded to update Administrative Details. Please discard PIP5274A.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern
Some customers may comment on an illuminated MIL. Technicians may find a DTC P16F3 as an active or history code in the TCM
Recommendation/Instructions
This DTC can set in several different modules. Verify that DTC P16F3 is set in the TCM. If it is set in the TCM please contact TAC
Do not continue with any repair attempts, do not disconnect or remove the TCM or TCM fuses
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the
remaining steps do not need to be performed.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may
occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools,
safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that
your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.