SET-TSB-15-011

Service Bulletin Details

Public Details for: SET-TSB-15-011

Dicusses the updates to southeast toyota accessory locking tailgate handle.


- 2015 - 2014 - 2013 -

Models from 2015
2015 TOYOTA TACOMA
Models from 2014
2014 TOYOTA TACOMA
Models from 2013
2013 TOYOTA TACOMA
ATTENTION: This Technical Service
Bulletin was issued by Southeast Toyota
Distributors, LLC.
For Toyota Dealers located within the Southeast
Region: Please refer to SET Dealer Daily to obtain
instructions on how to order parts and submit a warranty
claim (If applicable).
For Lexus Dealers or Toyota Dealers NOT located in
Florida, Georgia, Alabama, South Carolina or North
Carolina: For Repair Authorization, Parts Ordering, and
Warranty Claims please contact Southeast Toyota
Distributors Warranty Claims Department:
(888)851-2722
Press 5, then Press 4 for Out of Region SET Repairs
[email protected]
Thank you for your continued support.
1/8/2016
SET - TSB-15-011
Category:
Section:
Vehicle Exterior
Door/Hatch
Tacoma Locking Tailgate Handle
Applicability
YEAR(S)
MODEL(S)
2013-15
Tacoma
INSTALLED ACCESSORY INFORMATION
Locking Tailgate
Handle
LOCK20
00016-35026
REVISION NOTICE
10/27/2015
Original Document released on SET Dealer Daily
1/8/2016
Format Revised for TIS publication
Any previous printed versions of this bulletin should be discarded.
Introduction
The 00016-35026 locking tailgate handle for Tacoma applications received updates to
improve reliability and durability of the product. The part number has been updated to
00016-35044 as the design of the part has changed. The purpose of this bulletin is to
assist technicians in the identification of the differences between the old and new parts
and communication of common installation issue.
Warranty Information
For Dealers located in the Southeast Region, Florida, Georgia, Alabama, South Carolina, or
North Carolina, Submit Warranty claim utilizing the information below.
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
611081
Tail Gate Lock Handle Assembly (R&R)
0.5
00016-35026
99
99
Port Installed Option (PIO) ‐ is in effect for 36 months or 36,000 miles from the vehicle’s in‐service date, whichever
occurs first. Unless otherwise specified in vehicle VIN inquiry.
Dealer Installed Option (DIO) ‐ is in effect for 12 months, regardless of mileage, from the date the part(s) was
installed on the vehicle or the remainder of any applicable New Vehicle Limited Warranty, whichever provides greater
coverage.
Over the Counter Sale (OCS) ‐ is in effect for 12 months, regardless of mileage, from the date the part(s) were sold.
Labor is not warranted for over‐the counter service part replacements.
If you are a dealer located outside of the Southeast Region, please contact the SET Accessory
Warranty Department at (888) 851-2722 or email [email protected] for claim
payment instructions.
1
January 8, 2016
2
Tacoma Locking Tailgate Handle
Parts Information
PART NUMBER
DISCRIPTION
00016-35044
Tacoma Tailgate Lock
If you are a dealer outside of the SET region, please contact the SET accessory
department at (888) 851-2722 or email [email protected]
Repair Process
Verify correct installation
1. Remove cover from tailgate
2. Inspect the DRIVER SIDE latch Rod. The latch rod should be flipped during
Locking Tailgate handle installation. Refer to installation instructions on TIS.
*NOTE: Do not bend the Latch Rod. Bending the rod extends the effective length
of the rod causing excessive travel needed to release latch.
INCORRECT:
Southeast Toyota Distributors, LLC
January 8, 2016
Tacoma Locking Tailgate Handle
CORRECT:
Identify Locking Tailgate Handle assembly
Previous Part
Southeast Toyota Distributors, LLC
3
January 8, 2016
Tacoma Locking Tailgate Handle
Revised Part
Improvements to lock handle include
 Metal linkage (rocker/controller arm) re-designed to avoid possible back-up
camera interference.
 Plastic blend of handle changed to improve overall strength.
If you find the Locking Tail Gate Handle has failed
1. Verify Latch Rods were Installed properly
2. Identify Handle

Previous design (00016-35026) Replace Lock handle assembly with
revised part 00016-35044.

If revised part 00016-35044 has failed, take a pictures of Drivers Latch
Rod and Broken Lock Handle Linkage prior to removal of handle.
Replace the Locking Tailgate Latch Assembly. Include the Pictures of
latch rod installation in an SET Dealer Product Report.
Southeast Toyota Distributors, LLC
4


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.