SP365-001
Service Bulletin Details
Public Details for: SP365-001
On certain volvo trucks with the amtf transmission, using transmission pto1, there could be grinding when engaging pto or pto will not remain engaged when shifting from ?Drive or reverse? To ?Neutral?. This is due to a vecu sw issue.
- 9999 -
Models from 9999
9999 VOLVO VN |
Volvo Trucks North America Greensboro, NC USA Service Program Trucks Date This Service Program replaces SP 365-001 (USA139200206) dated 7.17 7.2017 Group No. 365 001 Release Page 02 1(3) Vehicle ECU, Reprogramming VN SP 365-001, Vehicle ECU, Reprogramming (July 2017) On Certain Volvo Trucks with the AMTF transmission, using transmission PTO1, there could be grinding when engaging PTO or PTO will not remain engaged when shifting from “drive or reverse” to “neutral”. This is due to a VECU SW issue. To correct this issue follow the procedure below: USA139363339 PV729-SP365-001 English Volvo Trucks North America Service Program Date 7.2017 Group No. Release 365 001 02 Vehicle ECU, Reprogramming Procedure You must read and understand the precautions and guidelines in Service Information, group 30, "General Safety Practices, Electrical" before performing this procedure. If you are not properly trained and certified in this procedure, ask your supervisor for training before you perform it. NOTE: Information is subject to change without notice. Illustrations are used for reference only and can differ slightly from the actual vehicle being serviced. However, key components addressed in this information are represented as accurately as possible. 1 Park the vehicle on a flat and level surface. 2 Apply the parking brake. 3 Place the transmission in neutral or park. 4 Install the wheel chocks. W7086748 5 Using Premium Tech Tool (PTT), connect to the vehicle. 6 Run Accessory kit 85151972. 7 Reprogram the VECU, MID144. Note: Follow the on screen prompts until the programming is complete. 8 Disconnect the vehicle from Premium Tech Tool (PTT). 9 Remove the wheel chocks. Page 2(3) Volvo Trucks North America Service Program Date 7.2017 Group No. Release 365 001 02 W7086759 Reimbursement This repair is covered by an authorized Service Program. Reimbursement is obtained via the normal claim handling process. UCHP Reimbursement Claim Type (used only when uploading from the Dealer Bus. Sys.) B Recall Status Vehicle inspected, repair not required Vehicle repaired per instruction Labor Code Primary Labor Code (Vehicle ECU, Reprogramming) 3651-22-09-02 0.3 hrs Take to take charge and determine campaign status 1700–16–01–01 0.3 hrs Causal Part 22592366 SCC Code S7188 Authorization Number NA Expiration Date July 31, 2018 Page 3(3)