2048777.1
Service Bulletin Details
Public Details for: 2048777.1
Bentayga steering rack control module - replacement routine
Models from 2018
2018 BENTLEY BENTAYGA |
Models from 2017
2017 BENTLEY BENTAYGA |
Technical product information Topic Market area Brand Transaction No. Level Status Release date Bentayga steering rack control module - replacement routine Bentley: worldwide (2WBE),Hongkong-Macau (5HK) Bentley 2048777/1 EH Approval New customer code Object of complaint Complaint type running gear -> steering system running gear -> steering, power-assisted steering -> electro-mechanical power steering running gear -> steering system functionality functionality -> defective function sequence noise, vibration Vehicle data Benatyga Sales types Type MY Brand Designation Engine code Gearbox code Final drive code 4V1* 2017 E * * * 4V1* 2018 E * * * Documents Document name master.xml Position Technical product information Bentayga steering rack control module - replacement routine Transaction No.: 2048777/1 Customer statement / workshop findings After replacing the steering rack the replacement routine using the Off Board Diagnostic Information System for the steering rack control module must also be conducted Technical background From 04/11/17 the control module replacement routine will be corrected within the applicable Off Board Diagnostic Information System release, until that date please see the details within the Measure section of this TPI Production change - Measure Once replacement of the steering rack has been conducted - selectand enter the SVM code 4V044PARAM01 this will configure the steering rack control module to the correct level Please note that you will also need to run the following tests after the mod measure has completed successfully (these are normally added into the test plan automatically by the 44 - Replace CM routine): • 16 - Steering angle sensor calibration • 44 - Adapt end stops • 44 - Clear fault memory After 04/11/17 a modification measure will not be required, the replace routine will complete automatically