SSM 46816

Service Bulletin Details

Public Details for: SSM 46816

2017 vehicles equipped with a 2.0l gtdi, 2.3l gtdi, or 2.5l pfi engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched


- 2017 -

Models from 2017
2017 FORD C-MAX
2017 FORD EDGE
2017 FORD ESCAPE
2017 FORD EXPLORER
2017 FORD FOCUS
2017 FORD FUSION
2017 FORD MUSTANG
2017 FORD TAURUS
2017 FORD TRANSIT CONNECT
2017 LINCOLN MKC
2017 LINCOLN MKZ 
SSM
46816
2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with
a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a
crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped,
diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers
should never be installed along with a laser etched crankshaft timing sprocket. Related WSM
procedure information is in the process of being updated.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.