V241503 2040179
Service Bulletin Details
Public Details for: V241503 2040179
Technical bulletin: this document refers to direction on dtc P2014 intake manifold position sensor -g336- replacement, and its fault codes.
Models from 2015
| 2015 VOLKSWAGEN BEETLE |
| 2015 VOLKSWAGEN BEETLE CONVERTIBLE |
| 2015 VOLKSWAGEN GOLF |
| 2015 VOLKSWAGEN GOLF SPORTWAGEN |
| 2015 VOLKSWAGEN GTI |
| 2015 VOLKSWAGEN JETTA |
| 2015 VOLKSWAGEN PASSAT |
Models from 2014
| 2014 VOLKSWAGEN BEETLE |
| 2014 VOLKSWAGEN BEETLE CONVERTIBLE |
| 2014 VOLKSWAGEN JETTA |
| 2014 VOLKSWAGEN PASSAT |
Technical Bulletin Model(s) Year Jetta, Beetle, Beetle Convertible 2013-2015 Jetta, Passat, Beetle, Beetle Convertible 2014-2015 GTI 2015 Eng. Code Trans. Code VIN Range From VIN Range To All All All All All All All All All All All All All All All All All All 2.0T (CPPA, CPLA) 1.8T (CPKA, CPRA) 2.0T (CXCA, CXCB) 2.0T GTI 2015 (CNTA) 1.8T Golf 2015 (CNSB, CNSA) Golf, Golf SportWagen, 1.8T 2015 (CXBA, CXBB) Condition 24 15 03 April 6, 2015 2040179 Supersedes Technical Bulletin V241502 dated March 24, 2015 to include additional engine applicability. DTC P2014 Intake Manifold Position Sensor -G336- Replacement Direction on proper part replacement when diagnosing fault code P2014 in the ECM. Technical Background Information only. Production Solution Information only. Page 1 of 2 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Service If after performing Guided Fault Finding (GFF) for fault code P2014 in the ECM, the Intake Manifold Runner Position Sensor -G336- requires replacement, only replace the sensor, NOT the entire intake manifold assembly. Claims for intake manifolds will be debited unless directed and documented by GFF. Note: When claiming Intake Manifold Runner Position Sensor -G336- use PID 2465. Warranty Information only. Required Parts and Tools Information only. Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Page 2 of 2 © 2015 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.