A661330 2030471-
Service Bulletin Details
Public Details for: A661330 2030471-
Supersedes technical service bulletin group 66 number 12-24 dated august 24, 2012. Customer may report the license plate attachment screws do not install properly. The license plate brackets are designed to be used with the appropriate leng
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Technical Service Bulletin 66 License Plate Mounting Bracket Threaded Inserts Stripped 66 13 30 2030471/2 June 4, 2013. Supersedes Technical Service Bulletin Group 66 number 12-24 dated August 24, 2012 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment All Audi 2012 - 2015 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 2 - Revised header data (added model years) 1 8/24/2012 Initial publication Customer may report the license plate attachment screws do not install properly. Technical Background The license plate brackets are designed to be used with the appropriate length screw installed by hand with a screwdriver. Damaged warranty parts have been returned to Audi of America with evidence of excessive torque used when installing the screw and/or excessive screw length (Figure 1). Figure 1. Damaged screw inserts Production Solution Not applicable. © 2013 Audi of America, Inc. Page 1 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service The appropriate screw length is dependent upon the cumulative thickness of the license plate plus any decorative frame placed over the license plate. Recommended screw length: • License plate without decorative frame: M6 x 8 mm • License plate WITH 2 mm thick decorative frame: M6 x 10 mm Tip: Manually install the license plate screws using a handheld screwdriver. If the screw bottoms out, remove this screw and select a shorter screw instead of applying excessive torque. Otherwise, damage may occur to the license plate bracket screw inserts. Warranty This damage is due to outside influence and is not covered by any Audi warranty. Required Parts and Tools Not applicable. Additional Information All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2013 Audi of America, Inc. Page 2 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.