A571516 2024111-

Technical Service Bulletin
57 Replaced comfort system control module J393 (BCM2) cannot be coded
57 15 16 2024111/7 November 3, 2015. Supersedes Technical Service Bulletin Group 69 number 12-22 dated
February 13, 2012 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A5 Cabriolet
2010 - 2016
All
Not Applicable
A4
2009 - 2016
All
Not Applicable
Q5
2010 - 2017
All
Not Applicable
A5
2008 - 2016
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
7
-
Revised header data (Added model years 2013 - 2016 for A4 and A5, and model
years 2013 - 2017 for Q5)
Revised Technical Background (Updated Parts Bulletin number)
Revised Service (Simplified SVM table)
6
02/13/2013
Revised Service (Modified SVM table)
Revised Technical Background
5
12/14/2011
Revised Technical Background
Revised Service
After the comfort system central control module, J393 (address word 05) is replaced, the control module cannot
be coded via SVM spec/actual.
© 2015 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Technical Background
Any time a comfort system central control module, J393 (address word
05), is replaced, the new control module must be coded and
parameterized with online SVM spec/actual or an SVM code. If the SVM
spec/actual returns a response of “Check Hardware”, then an SVM code
is required to code and parameterize the new control module.
The SVM code can be found in Parts Bulletin 9-101, which can be found
on the etkainfo.com web site (Figure 1).
Figure 1. Link to etkainfo.com in ETKA.
Production Solution
Not applicable.
Service
When the comfort system central control module, J393 (address word 05) is replaced, online coding and
parameterization must first be attempted with an SVM spec/actual comparison. If the SVM spec/actual
comparison returns a response of “Check Hardware”, it is possible that one of the SVM codes listed below is
required for coding and parameterizing the new control module.
Tip: No main software update is performed during this SVM communication.
Tip: If the vehicle is a model year 2008 or 2009 A5/S5 with an original control module part number of
8K0907289*, then it is no longer necessary to run the 8T46U002 and 8T46U003 SVM codes. The actions
previously provided by these SVM codes have been incorporated into the SVM code XCHG46A001.
Model
Old Software
Part Number
2008 - 2012 A5/S5 Coupe
8K0907289*
2009 - 2012 A4/S4
8K0907064*
2009 - 2012 Q5
8T0907064*
Old
Software
Version
N/A
New Software
Part Number
8K0907064*
8T0907064*
New
Software
Version
SVM Action
Code
N/A
XCHG46A001
Tip: 8K0907064* indicates that the part number could be 8K0907064AH, 8K0907064AS, 8K0907064CS,
etc. Due to the number of possible variations, not all combinations are listed above.
© 2015 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service
Bulletin is informational only.
Service Number:
6953
Damage Code:
0040
Diagnostic Time:
SVM documentation feedback
0150 0000
Time stated on
diagnostic
protocol
(50 TU MAX)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2024111/7
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2024111) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
© 2015 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.