A371452 2039267-
Service Bulletin Details
Public Details for: A371452 2039267-
Bump felt just after the vehicle is brought to a stop. Rattle noise heard from transmission at idle speed. The software of the transmission mechatronic control module, j743, needs to be updated.
Models from 2015
| 2015 AUDI RS5 |
| 2015 AUDI S4 |
| 2015 AUDI S5 |
| 2015 AUDI S6 |
| 2015 AUDI S7 |
Models from 2014
| 2014 AUDI RS5 |
| 2014 AUDI S4 |
| 2014 AUDI S5 |
| 2014 AUDI S6 |
| 2014 AUDI S7 |
Models from 2013
| 2013 AUDI RS5 |
| 2013 AUDI S4 |
| 2013 AUDI S5 |
| 2013 AUDI S6 |
| 2013 AUDI S7 |
Technical Service Bulletin 37 Bump after coming to a stop or rattle noise from transmission at idle speed 37 14 52 2039267/1 December 19, 2014. Model(s) Year VIN Range Vehicle-Specific Equipment S4, S5, RS5, S6, S7 2013 - 2015 All OB5 Transmission Condition Customer may report: • Bump felt just after the vehicle is brought to a stop. • Rattle noise heard from transmission at idle speed. Technical Background The software of the transmission mechatronic control module, J743, needs to be updated. Production Solution New software of the transmission mechatronic control module, J743, addressed the condition. © 2014 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the transmission mechatronic control module, J743, using the SVM action code as listed in the table below, if necessary. Model Transmission Old Software Part Number Old Software Version (or Lower) New Software Part Number New Software Version (or higher) 0B5 Transmission 8T0927156H <0005 8T0927156H 0005 0B5 Transmission 8T0927156F <0011 8T0927156F 0011 0B5 Transmission 8K2927156M <0011 8K2927156M 0011 0B5 Transmission 8K5927156D <0004 8K5927156D 0004 0B5 Transmission 4G1927156S <0013 4G1927156S 0013 0B5 Transmission 4G9927156C <0006 4G9927156C 0006 SVM Code Input RS5 S4/S5 02A089 S6/S7 Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 3730 Damage Code: 0041 Labor Operations: Update J743 software 3730 2599 50 TU Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2039267/1 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. © 2014 Audi of America, Inc. Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732: 00 Software Version Management (SVM), operating instructions. All parts and service references provided in this TSB (2039267) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2014 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.