5NP-A2D2E-12
Service Bulletin Details
Public Details for: 5NP-A2D2E-12
This bulletin describes the procedure to update the traction control system (tcs) logic on some 2017-2018my santa fe sport (an) 2.0t and santa fe (nc) 3.3l vehicles. This update helps reduce unnecessary tcs engagement during low speed / dry
Models from 2018
2018 HYUNDAI SANTA FE |
2018 HYUNDAI SANTA FE SPORT |
Models from 2017
2017 HYUNDAI SANTA FE |
2017 HYUNDAI SANTA FE SPORT |
GROUP BRAKES DATE Technical Service Bulletin SUBJECT: NOVEMBER, 2017 NUMBER 17-BR-002-1 MODEL(S) Santa Fe Sport (AN) Santa Fe (NC) TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L This TSB supersedes 17-BR-002 to update the applicable vehicles production dates. Description: This bulletin describes the procedure to update the Traction Control System (TCS) logic on some 2017-2018MY Santa Fe Sport (AN) 2.0T and Santa Fe (NC) 3.3L vehicles. This update helps reduce unnecessary TCS engagement during low speed / dry road acceleration. Applicable Vehicles: 2017~2018MY Santa Fe Sport (AN) vehicles equipped with 2.0T engine. o HMMA-built (AN) vehicles: 17MY SOP to September 1, 2017. o KMMG-built (AN) vehicles: 17MY SOP to September 5, 2017. 2017~2018MY Santa Fe (NC) vehicles produced from 17MY SOP to June 5, 2017. GDS Information: EVENT# DESCRIPTION 444 (or later compatible event)* DMA 2.0T-GDI TCS Control Logic Improvement (ESC) 445 (or later compatible event)* NC 3.3GDI TCS Control Logic Improvement (ESC) (* The latest event that appears in the ESC Auto Mode event list for the particular vehicle) Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SUBJECT: TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Warranty Information: MODEL OP CODE OPERATION OP TIME CAUSAL PART Santa Fe Sport (AN) – Without SCC/AEB 58920-4Z300 Santa Fe Sport (AN) – With SCC/AEB 58920-4Z400 Santa Fe (NC) – Without SCC/AEB 58900F01 ESC Update 0.3 M/H NATURE CAUSE CODE CODE I14 ZZ3 58920-B8AC0 Santa Fe (NC) – With SCC/AEB 58920-B8BC0 ROM ID Information Table: MODEL Santa Fe Sport (AN) ENGINE ROM ID ESC P/No OLD NEW 58920-4Z300 (Non SCC/AEB) S36GAD1C11-2-5426 S36GAF1D12-2-5A18 S36GAF1E12-2-6C27 S36GAG1E12-2-7320 58920-4Z400 (SCC/AEB) S36KAD1C11-2-5429 S36KAE1C11-2-5512 S36KAG1D12-2-5A19 S36KAG1E12-2-6C28 S36KAH1E12-2-7321 58920-B8AC0 (Non SCC/AEB) S46GAD1B10-2-5721 S46GAE1B10-2-5A08 S46GAF1B10-2-5A18 S46GAF1C10-2-6C29 S46GAG1C10-2-7322 58920-B8BC0 (SCC/AEB) S46KAD1B10-2-5725 S46KAE1B10-2-5A12 S46KAF1B10-2-5A19 S46KAF1C10-2-7102 S46KAG1C10-2-7323 2.0T-GDI Santa Fe (NC) 3.3GDI Service Procedure: NOTICE This Service Procedure is performed using GDS-mobile. For update information and general precautions, please refer to TSB #15-GI-001. Manual mode should only be performed when the Auto update fails. If the auto update fails, turn the ignition OFF for 10 seconds, then back ON again to reset the control unit before performing the manual update. TSB #: 17-BR-002-1 Page 2 of 9 SUBJECT: SUBJECT: TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Auto Update Mode: 1. Connect a GDS (or G-Scan) tool to the vehicle. From the home screen, select ECU Upgrade. 2. Select Auto Mode. TSB #: 17-BR-002-1 Page 3 of 9 SUBJECT: SUBJECT: 3. TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Select ABS/ESC system, and then click ID Check. The current and target ROM IDs will be shown. Verify the ROM IDs according to the ROM ID Information Table on page 2. Verify the applicable event number and description is shown under Event Group. Click Upgrade to proceed with the update. 4. Read the caution message, then click OK to continue. TSB #: 17-BR-002-1 Page 4 of 9 SUBJECT: SUBJECT: 5. TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Once ECU Upgrading… (2/2) is completed, turn the ignition OFF for 10 seconds, then back on again. Click OK to continue. 6. Click OK after update is completed. 7. When prompted, click Yes to run fault code search. Select all systems to check for DTCs. Erase any DTCs found. Start the engine and confirm proper operation of the vehicle. TSB #: 17-BR-002-1 Page 5 of 9 SUBJECT: SUBJECT: TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Manual Update Mode: NOTICE Manual mode should only be performed when the Auto update fails. If the auto update fails, turn the ignition OFF for 10 seconds, then back ON again to reset the control unit before performing the manual update. 1. Connect a GDS (or G-Scan) tool to the vehicle. From the home screen, select ECU Upgrade. TSB #: 17-BR-002-1 Page 6 of 9 SUBJECT: SUBJECT: TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L 2. Select Manual Mode. 3. Select ABS/ESC system. Select the applicable part number (with SCC/AEB or without SCC/AEB) according to the Warranty Information Table. Click Upgrade to proceed with the update. TSB #: 17-BR-002-1 Page 7 of 9 SUBJECT: SUBJECT: 3a. TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L One way to verify which part number is correct for a specific vehicle is to check the part number visually on the ESC module. The ESC module is located at the rear of the engine compartment, on the passenger side. Once located, inspect the part label to see the part number. 4. Input the correct password when prompted, according to the tables below, then click OK. #444 Santa Fe Sport (AN) MENU PASSWORD DMA 2.0T-GDI ESC 58920-4Z300 DMA 2.0T-GDI ESC 58920-4Z400 4300 4400 #445 Santa Fe (NC) MENU PASSWORD NC 3.3GDI ESC 58920-B8AC0 NC 3.3GDI ESC 58920-B8BC0 0080 0081 TSB #: 17-BR-002-1 Page 8 of 9 SUBJECT: SUBJECT: 5. TCS UPDATE AN SANTA FE SPORT 2.0T, NC SANTA FE 3.3L Once ECU Upgrading… (2/2) is completed, turn the ignition OFF for 10 seconds, then back on again. Click OK to continue. 6. Click OK after update is completed. 7. When prompted, click Yes to run fault code search. Select all systems to check for DTCs. Erase any DTCs found. Start the engine and confirm proper operation of the vehicle. TSB #: 17-BR-002-1 Page 9 of 9 SUBJECT: