TT 450719
Service Bulletin Details
Public Details for: TT 450719
Steering angle adaptation instructions, not included in repair manual
- 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 -
Models from 2004
| 2004 VOLKSWAGEN EUROVAN |
Models from 2003
| 2003 VOLKSWAGEN EUROVAN |
Models from 2002
| 2002 VOLKSWAGEN EUROVAN |
Models from 2001
| 2001 VOLKSWAGEN EUROVAN |
Models from 2000
| 2000 VOLKSWAGEN EUROVAN |
Models from 1999
| 1999 VOLKSWAGEN EUROVAN |
Models from 1998
| 1998 VOLKSWAGEN EUROVAN |
Models from 1997
| 1997 VOLKSWAGEN EUROVAN |
Models from 1996
| 1996 VOLKSWAGEN EUROVAN |
Technical Tips Technical Tip Topic 45-07-19TT – Euro van, ESP Steering Angle Sensor -G85- Adaptation Market area United States 444 Volkswagen of America, Inc. (6444) Brand Volkswagen Date January 3, 2013 Condition ATTENTION: THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN. TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING. Eurovan-ESP Steering Angle Sensor Adaptation Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To Eurovan 1996-2004 All All All All Technical Background When replacing the steering angle sensor -G85-, you may run into a coding issue with the ABS module or fault codes 00778 and 01044. The new replacement steering angle sensor part number is 7D0 959 654 with revision index A15 (printed on the part). The old part has the same part number except the revision number is A13. The new part causes the ABS coding to revert back to "0" when attempting to adapt the steering angle sensor. Code the steering angle sensor twice instead of only one time, before setting Basic Settings. Service Perform the following procedure: Center the steering wheel. Turn the ignition ON. Enter Vehicle Self Diagnosis/OBD. Go to Address Word 03 – Brakes/ABS. Select Access Authorization and enter login number 07669. Select Coding and enter code 06639. Note: Test plan will ask for key cycle - Do not cycle the key or start vehicle, just select OK / Continue. Re-enter access authorization and re-enter login number 07669. Re-enter Coding and re-enter 06639 (You should see the two coding’s 06639 (06639) in the upper right corner of the scan tool). Note: Test plan will ask for key cycle - Do not cycle the key or start vehicle, just select OK / Continue. Turn steering wheel one turn to the right and one turn to the left. (Do not start vehicle). Enter Access Authorization and enter login number 40168. Go to Basic Settings. Enter Group 1. The display should read "sensor OK" if the procedure was successful (You may need to scroll down to see the “OK”. 1 Technical Tips Note: The ABS, ESP and brake lights will remain on until the scan tool is disconnected from the diagnostic plug. If the procedure was performed successfully no faults will be stored in 03-ABS. Revision History Revision Number Released Date Reason For Update 2032312/6 5/5/17 Revised test plan regarding ignition key cycle. 2032312/1 1/3/13 Original publication. © 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 2