TT 57-13-01
Service Bulletin Details
Public Details for: TT 57-13-01
Tech tips (keyless entry remotes inoperative issue): if all keyless entry remotes are inoperative but power door locks work from buttons inside vehicle, static current measuring mode may be active in the diagnostic interface for databus (g
Models from 2013
2013 VOLKSWAGEN TOUAREG |
Models from 2012
2012 VOLKSWAGEN TOUAREG |
Models from 2011
2011 VOLKSWAGEN TOUAREG |
Tech Tips Date: February 8, 2013 TT 57-13-01 2011-2013 Touareg – Keyless Entry Remotes Inoperative If all keyless entry remotes are inoperative but power door locks work from buttons inside vehicle, static current measuring mode may be active in the Diagnostic interface for databus (Gateway). To deactivate Static current measuring mode, use Vehicle Self-diagnosis to select address word 19 – Diagnostic interface for databus (Gateway), and then select Adaptation. Choose Static current measuring mode from the displayed list, forward arrow, and ensure value is set to “not active”. It may be necessary to cycle the ignition key for changes to take effect. Page 1 of 1 ver1.2 © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.