TT 011708

Technical Tips
Technical Tip
Topic
01-17-08TT – Precautionary Steps - Campaign 23U3 and Error ERP0203E
Market area
United States 444 Volkswagen of America, Inc. (6444)
Brand
Volkswagen
Date
August 21, 2017
Condition
ATTENTION:
THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN.
TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING.
Precautionary Steps - Campaign 23U3 and Error ERP0203E
Model(s)
Year
Jetta, Jetta
Wagon, Golf,
Beetle, Beetle
Convertible
2009-2017
Eng. Code
2.0l TDI
(CJAA, CBEA)
Trans. Code
VIN Range From
VIN Range To
All
All
All
Technical Background
When performing campaign 23U3 these are some precautionary steps that can be taken to prevent ODIS displaying
“ERP0203E The operating conditions for the modification are not met“. Check the operating conditions in the work
instructions (Technical Product Information).
Service
Use this information to assist when diagnosing why “operating conditions for the modification are not met” is displaying
in ODIS. This can include the Vehicle Electrical System Control Module -J519- or door switch concerns.
Tip:
Model Year 2009 vehicles will not have Address Word 09 – J519 software updated. If you are receiving the
ERP0203E message then there are other vehicle conditions that have not been met.


Vehicle battery voltage not sufficient – Example, three faulty battery maintainer notifications.
Manually check battery voltage with a DVOM at the battery post, or monitor a MVB for Terminal 30 / Battery
voltage on the vehicle. Voltage value is best near 13 volts.
Figure 1
1
Technical Tips



Address Word 09 - J519 not identified or communicating during the initial GFF Log interrogation.
The J519 did not respond or stopped communicating before 23U3 was started.
Open the L/F door, activate the hazard lights and cycling “Lock to Unlock”, should wake up the CAN BUS for the
J519. This is published in the 23U3 circular.
Exception: J519 remains grayed out on the ODIS screen.



If the ODIS screen remains with the J519 grayed out, it needs to be re-identified before 23U3 is reattempted.
You must right click on Address Word 09 - J519, and identify control module.
If there is a version of this module to choose, select “09 – Vehicle electrical system control module” (Figure 2).
You may be required to interrogate the J519 for faults to satisfy ODIS communication with J519.
Figure 2



With the L/F door open, the MFI displays open but MVB in Address Word 09 – J519 shows L/F door closed
(Figure 3).
There may be an issue with a micro switch in the L/F door latch that prevents the J519 from reporting that the L/F
door as open.
The L/F door latch may be faulty or there is a wiring issue, repair as needed. Also, the GFF log may display a fault
related to L/F door condition.
Figure 3
2
Technical Tips
Additional Information
Revision History
Revision Number
Released Date
2048695/1
8/21/17
Reason For Update
Original publication.
© 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on
the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
3