TT 37-11-05

Tech Tips
Date: June 24, 2011
TT 37-11-05
All Models with DSG (02E) Transmission – Measure Value
Block Request
June 21, 2013: Update to Information.
If a request has been made for several MVBs from a DSG transmission, the test plan “Read measured
values for obligation to report” can be selected. This function will retrieve all of the MVBs from the
transmission which can be attached to a VTA ticket. This selection is available under Guided Functions or
GFF when using VAS-PC, as shown below.
Note:
The exact name of the test plan may vary based on vehicle. Examples include “Read measured for
reporting” or “Automatically read measured values”.
When using ODIS, there is no selection to read measured values for obligation to report. Instead, right
click on the transmission control unit on the control modules screen, select Guided Functions and Read
Measured Values. Use the Select All function to record all listed values, and then save this information to
attach to the VTA case.
Page 1 of 1
ver1.2
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.