FSB 356-003
Service Bulletin Details
Public Details for: FSB 356-003
Fog lamp moisture intrusion
- 9999 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 - 1993 - 1992 - 1991 - 1990 -
Models from 9999
| 9999 VOLVO VNL |
Models from 2018
| 2018 VOLVO VNL |
Models from 2017
| 2017 VOLVO VNL |
Models from 2016
| 2016 VOLVO VNL |
Models from 2015
| 2015 VOLVO VNL |
Models from 2014
| 2014 VOLVO VNL |
Models from 2013
| 2013 VOLVO VNL |
Models from 2012
| 2012 VOLVO VNL |
Models from 2011
| 2011 VOLVO VNL |
Models from 2010
| 2010 VOLVO VNL |
Models from 2009
| 2009 VOLVO VNL |
Models from 2008
| 2008 VOLVO VNL |
Models from 2007
| 2007 VOLVO VNL |
Models from 2006
| 2006 VOLVO VNL |
Models from 2005
| 2005 VOLVO VNL |
Models from 2004
| 2004 VOLVO VNL |
Models from 2003
| 2003 VOLVO VNL |
Models from 2002
| 2002 VOLVO VNL |
Models from 2001
| 2001 VOLVO VNL |
Models from 2000
| 2000 VOLVO VNL |
Models from 1999
| 1999 VOLVO VNL |
Models from 1998
| 1998 VOLVO VNL |
Models from 1997
| 1997 VOLVO VNL |
Models from 1996
| 1996 VOLVO VNL |
Models from 1995
| 1995 VOLVO VNL |
Models from 1994
| 1994 VOLVO VNL |
Models from 1993
| 1993 VOLVO VNL |
Models from 1992
| 1992 VOLVO VNL |
Models from 1991
| 1991 VOLVO VNL |
Models from 1990
| 1990 VOLVO VNL |
Field Service Bulletin Trucks Volvo Trucks North America Greensboro, NC USA Date This bulletin replaces PV729-FSB356-003 (USA41001) dated 2.2010. 10.13 Group No. 356 003 Release Page 1(5) Fog Lamp Moisture Intrusion VNL Version2 FSB 356-003, Fog Lamp Moisture Intrusion (October 2013) It was determined that the use of pneumatic or high torque electric tools caused the captive nuts moulded into the fog lamp housing to spin and crack the housing. To prevent future failures, a new fog lamp installation procedure has been created. Should a fog lamp assembly require replacement, the new installation procedure must be used for the repair. Procedure You must read and understand the precautions and guidelines in Service Information, group 3, “General Safety Practices, Electrical” before performing this procedure. If you are not properly trained and certified in this procedure, ask your supervisor for training before you perform it. 1 Open the hood Service personnel: Please circulate, read and initial Service Manager Warranty Administrator PV729-FSB356-003 Workshop Foreman Service Technicians USA62125 Volvo Trucks North America Field Service Bulletin Date 10.13 Group No. 356 003 Release 2 Using hand tool only, remove the three (3) mounting bolts. Note: Do not use pneumatic or high torque electric tools this may cause the captive nuts to spin and crack the fog lamp housing. Page 2(5) Volvo Trucks North America Field Service Bulletin Date 10.13 Group No. 356 003 Release W3047653 1 Fog Lamp 2 Washer 3 Bolt 4 Remove the fog lamp assembly from the bumper 5 Insert the fog lamp assembly into the bumper Page 3(5) Volvo Trucks North America Field Service Bulletin Date 10.13 Group No. 356 003 6 Install the bolt finger tight, then using only hand tools torque tighten to 7 Nm (5 ft-lb). Release Page 4(5) Volvo Trucks North America Field Service Bulletin Date 10.13 Group No. 356 003 Release W3047653 1 Fog Lamp 2 Washer 3 Bolt Volvo Trucks North America engages in a continuous program of testing and evaluating to provide the best possible product. Volvo Trucks North America, however, is not committed to, or liable for updating existing chassis. Page 5(5)