TSB140019-111020

Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 1 of 24
Technical Service Bulletin
Technical Service Bulletin:
Released Date: 17-Nov-2017
TSB140019
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Fuel Pump - Plunger and Tappet Roller
Inspection and Repair
Warranty Statement
The information in this document has no effect on present warranty coverage or repair
practices, nor does it authorize TRP or Campaign actions.
Contents
Product Affected
•
•
•
•
•
•
•
•
•
•
•
ISX12 CM2350 X102
ISX12/ISX11.9 CM2250
ISX15 CM2250
ISX15 CM2250 SN
ISX15 CM2350 X101
PowerGen QSX15 CM2250
PowerGen QSX15 CM2250 ECF
QSX11.9 CM2250 ECF
QSX15 CM2250 ECF
QSX15 CM2350 X105
QSX15 CM2350 X106
This document, in conjunction with the information provided within the manuals listed in
Table 1 provides inspection and repair guidelines following the malfunction of a fuel
pump pumping plunger and/or roller tappet assembly.
The level of progressive damage to the fuel pump and other engine components will vary
with every incident; however, the repair direction will depend on only a few key criteria.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 2 of 24
Previous versions of this document provided specific repair directions according to the
vintage of the fuel pump and type of pumping plungers. Repair directions have now been
made common and apply to all fuel pumps regardless of vintage, pumping plunger type,
or tappet roller assembly type.
Figure 1, Fractured Fuel Pump Ceramic Pumping Plunger on CM2250 Engines.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 3 of 24
Figure 2, Fuel Pump Tappet Roller Assemblies.
Preliminary Inspection and Repair Direction for all Fuel Pump Malfunctions
If a broken tappet spring or spring retainer is found, see Technical Service Bulletin, Fuel
Pump Head Barrel Assembly Serviceability – Spring and Spring Retainer, TSB170015 for
repair direction.
Inspect and verify the condition of the fuel pump tappet rollers and fuel pumping plungers
if ceramic (CM2250 only). Reference Figure 1 and Figure 2 above and Procedure 005227 in Table 3 below.
Scenario 1: The fuel pump tappet rollers are damaged or ceramic pumping plunger
damage is found:
• Remove, cut open, and inspect the lubricating oil filter for debris. See Procedure
007-083 in Table 3.
• Connect INSITE™ electronic service tool to the service tool data link and review any
logged fault codes.
• Reference Table 1 below for repair direction.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 4 of 24
Scenario 2: The fuel pump tappet rollers and ceramic pumping plungers are not
damaged:
• Connect INSITE™ electronic service tool to the service tool data link and review any
logged fault codes. Follow appropriate fault code or symptom based troubleshooting
in EDS or QuickServe® Online (QSOL).
Table 1, Repair Direction Decision Matrix
Symptoms
• Non-wear debris or
particles are evident
in the lubricating oil
filter element.
• Fault Codes 415 or
143 are logged in the
engine control
module (ECM) within
the last 8 hours of
engine operation.
• Engine is seized, or
engine rotating
assembly produces
abnormal noise.
Are Any Symptoms
Present?
Repair Direction to
Follow
Yes
Repair Direction A
No
Repair Direction B
 CAUTION 
Immediately upon removal of the lubricating oil cooler assembly, a plug must be
inserted into the housing and cylinder block oil passage drillings. Failure to insert
the oil passage plug can result in a bearing failure, crankshaft failure, or both.
 CAUTION 
Do not allow dirt or foreign material to enter oil passages in the cylinder block
when cleaning the gasket sealing surfaces. Connecting rod bearing failures can
be caused if debris is introduced into the cylinder block or lubricating oil cooler
housing oil passages. Therefore, use of power tools combined with abrasive pads
to clean gasket surfaces is not recommended.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 5 of 24
Repair Direction A:
1. Drain lubricating engine oil. See Procedure 007-037 in Table 3.
2. Remove lubricating oil pan, and clean thoroughly. See procedure 007-025 in Table
3.
3. Remove and inspect lubricating oil pump for reuse. See Procedure 007-031 in Table
3.
4. Remove number 1 and number 4 main bearing caps and main bearings. See
procedure 001-006 in Table 3.
5. Inspect number 1 and number 4 main journals of crankshaft for reuse. See Service
Bulletin Crankshaft Reuse Guidelines for Cummins® Engines, Bulletin 5411180.
◦ If crankshaft meets reuse guidelines:
◾ Inspect number 1 and number 4 main bearings for signs of significant
debris embedding. If significant debris is found, remove number 1 and
number 4 connecting rod bearings for inspection.
◾ If damage is observed on number 1 and number 4 connecting rod
bearings, roll new connecting rod bearings in on all six journals. See
Procedure 001-006, 001-007, and 001-014 in Table 3.
◾ Roll new main bearings in on all seven main journals and install new
thrust bearings on number 4 main journal.
◦ If crankshaft does not meet reuse guidelines:
◾ Dealers should contact RAPIDSERVE™ Catastrophic group for preauthorization if engine is under warranty.
6.
7.
8.
9.
10.
11.
12.
◾ Cummins® Distributors should follow their local catastrophic process or
contact RAPIDSERVE™ for repair direction if engine is under warranty.
Repair fuel pump. Table 2 below must be referenced for specific instruction by
product type. See Procedure 005-016 in Table 3 below.
Thoroughly clean lubricating oil cooler housing. See Procedure 007-003 in Table 3.
Replace following lubricating oil system components:
◦ Lubricating oil cooler element. See Procedure 007-007 in Table 3.
◦ Lubricating oil filter bypass valve. See Procedure 007-014 in Table 3.
◦ Lubricating oil thermostat. See Procedure 007-039 in Table 3.
Install lubricating oil pan and other components removed to access main bearings.
See procedure 007-025 in Table 3
Install a new lubricating oil filter. See Procedure 007-013 in Table 3.
Prime and fill the engine with new lubricating oil. See Procedure 007-037 in Table 3.
Perform an aftertreatment diesel particulate filter (DPF) regeneration. See Procedure
014-013 in Table 3.
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 6 of 24
13. Perform a second lubricating oil and lubricating oil filter change. Priming lubricating
oil system a second time is not required. See Procedure 007-013 and 007-037 in
Table 3.
Repair Direction B:
1. Repair the fuel pump. Table 2 below must be referenced for specific instruction by
product type. See Procedure 005-016 in Table 3.
2. Drain the engine lubricating oil and remove the lubricating oil filter. See Procedure
007-013 and 007-037 in Table 3.
3. Replace the lubricating oil filter bypass valve. See Procedure 007-014 in Table 3.
4. Fit a new lubricating oil filter and refill the engine lubricating oil system. Priming the
lubricating oil system is not required. See Procedure 007-013 and 007-037 in Table
3.
Table 2, Fuel Pump Replacement Matrix
Fuel Pump Variation
Additional Action
Needed When Replacing
the Fuel Pump
Two-cylinder pumps and
fuel pump gear pump top
mount fuel lines
There is a cost effective
option to use a fuel pump
short block service kit.
Reference TSB150033.
PowerGen QSX15
CM2250 ECF
Three cylinder, two piston
fuel pumps
Reference TSB110064.
QSX15 CM2250
Fuel pump gear pump with
bottom mount fuel lines
New fuel lines are
required. Reference
TSB130044.
ISX15 CM2350 X101
None
Product
ISX15 CM2250
ISX15 CM2250 SN
PowerGen QSX15
CM2250
QSX15 CM2350 X105
Reference TSB150033 for
fuel pump repair options.
If damage to fuel pump
camshaft and roller
tappets was identified
during tappet inspection,
fuel pump head must be
reused, unless any of
following conditions are
present at time of repair:
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 7 of 24
Table 2, Fuel Pump Replacement Matrix
Product
Fuel Pump Variation
Additional Action
Needed When Replacing
the Fuel Pump
• Visual fuel leaks from
Torx™ plugs on fuel
pump head
• Active or recently
inactive fault codes
related to fuel system
performance
(Example FC: 559,
4726, or 4727)
• Complaints/confirmat
ion of excessive fuel
in lubricating oil.
QSX15 CM2350 X106
Complete fuel pump
assemblies should not be
used for these repairs. If
fuel pump head must be
replaced, build a complete
fuel pump using individual
components.
ISX12 CM2350 X102
ISX12/ISX11.9 CM2250
None
None
QSX11.9 CM2250 ECF
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/132/
132-005-016-trmixar5.html)
ISX15 CM2250
4022250
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 8 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/175/
175-005-016tr.html)
ISX15 CM2250 SN
4310736
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/133/
133-005-016-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/173/
173-005-016-trprix13.html)
ISX15 CM2350
X101
4310641
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/132/
132-005-016-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/133/
133-005-016-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 9 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/250/
250-005-016tr.html)
QSX15 CM2350
X105
4332667
Fuel Pump
Refer to Procedure
005-016
(/qs3/pubsys2/xml/
en/procedures/221/
221-005-016tr.html)
QSX15 CM2350
X106
4332712
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/132/
132-005-227-trmixar5.html)
ISX15 CM2250
4022250
Fuel Pump
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/175/
175-005-227tr.html)
ISX15 CM2250 SN
4310736
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/133/
133-005-227-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 10 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/173/
173-005-227-trprix13.html)
ISX15 CM2350
X101
4310641
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/132/
132-005-227-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/133/
133-005-227-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/250/
250-005-227.html)
QSX15 CM2350
X105
4332667
Fuel Pump Head
Refer to Procedure
005-227
(/qs3/pubsys2/xml/
en/procedures/221/
221-005-227.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-003-trmixar5.html)
ISX15 CM2250
4022250
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 11 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-003tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-003-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-003-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-003-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-003-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 12 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-003tr.html)
QSX15 CM2350
X105
4332667
Lubricating Oil
Cooler
Refer to Procedure
007-003
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-003tr.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-007-trmixar5.html)
ISX15 CM2250
4022250
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-007tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-007-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 13 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-007-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-007-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-007-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-007.html)
QSX15 CM2350
X105
4332667
Lubricating Oil
Cooler Element
Refer to Procedure
007-007
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-007.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-013-trmixar5.html)
ISX15 CM2250
4022250
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 14 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-013tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-013-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-013-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-013-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-013-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 15 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-013tr.html)
QSX15 CM2350
X105
4332667
Lubricating Oil
Filter (Spin-On)
Refer to Procedure
007-013
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-013tr.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-037-trmixar5.html)
ISX15 CM2250
4022250
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-037tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-037-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 16 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-037-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-037-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-037-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-037.html)
QSX15 CM2350
X105
4332667
Lubricating Oil
System
Refer to Procedure
007-037
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-037.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-014-trmixar5.html)
ISX15 CM2250
4022250
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 17 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-014tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-014-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-014-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-014-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-014-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-014.html)
QSX15 CM2350
X105
4332667
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 18 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Filter Bypass Valve
Refer to Procedure
007-014
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-014.html)
QSX15 CM2350
X106
4332712
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-083-trmixar5.html)
ISX15 CM2250
4022250
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-083tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-083.html)
ISX12/ISX11.9
CM2250
2883445
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-083-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-083-trvqxi6.html)
QSX15 CM2250
ECF
2883557
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 19 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-083.html)
QSX11.9 CM2250
ECF
2883561
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-083.html)
QSX15 CM2350
X105
4332667
Lubricating Oil and
Filter Analysis
Refer to Procedure
007-083
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-083.html)
QSX15 CM2350
X106
4332712
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-039-trmixar5.html)
ISX15 CM2250
4022250
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/175/
175-007-039tr.html)
ISX15 CM2250 SN
4310736
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-039-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 20 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/173/
173-007-039-trprix13.html)
ISX15 CM2350
X101
4310641
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/132/
132-007-039-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/133/
133-007-039-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/250/
250-007-039.html)
QSX15 CM2350
X105
4332667
Lubricating Oil
Thermostat
Refer to Procedure
007-039
(/qs3/pubsys2/xml/
en/procedures/221/
221-007-039.html)
QSX15 CM2350
X106
4332712
Aftertreatment
Testing
Refer to Procedure
014-013
(/qs3/pubsys2/xml/
en/procedures/101/
101-014-013-trmixar5.html)
ISX15 CM2250
4022250
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 21 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Aftertreatment
Testing
Refer to Procedure
014-013
(/qs3/pubsys2/xml/
en/procedures/101/
101-014-013-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Aftertreatment
Testing
Refer to Procedure
014-013
(/qs3/pubsys2/xml/
en/procedures/101/
101-014-013-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Aftertreatment
Testing
Refer to Procedure
014-013
(/qs3/pubsys2/xml/
en/procedures/101/
101-014-013-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/132/
132-001-006-trmixar5.html)
ISX15 CM2250
4022250
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/175/
175-001-006tr.html)
ISX15 CM2250 SN
4310736
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 22 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/133/
133-001-006-trmixab.html)
ISX12/ISX11.9
CM2250
2883445
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/173/
173-001-006-trprix13.html)
ISX15 CM2350
X101
4310641
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/132/
132-001-006-trvqxi6.html)
QSX15 CM2250
ECF
2883557
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/133/
133-001-006-trvqxb.html)
QSX11.9 CM2250
ECF
2883561
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/250/
250-001-006tr.html)
QSX15 CM2350
X105
4332667
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 23 of 24
Table 3, Associated Procedures
Procedure Title
Procedure
Number
Service Model
Name
Bulletin Number
Main Bearings
Refer to Procedure
001-006
(/qs3/pubsys2/xml/
en/procedures/221/
221-001-006tr.html)
QSX15 CM2350
X106
4332712
Document History
Date
Details
2014-2-14
Module Created
2014-9-4
none
2014-10-24
Fixed broken link.
2014-10-29
Typo corrected.
2015-1-7
Procedure steps updated.
2015-3-17
Added the fuel pump short block service kit TSB reference.
2015-10-19
Modified the fuel pump tappet rollers are damaged section step
1 and options a, b, and c.
2016-4-5
Modified title. Added Product Affected section. Updated repair
direction and Table 3.
2016-7-5
Removed "Ceramic" from title. Modified Table 2.
2016-12-6
Repair Direction A: moved Steps 1, 3, and 4 to step numbers
6, 7, and 8.
2017-1-10
Updated Table 3, Associated Procedures.
2017-4-10
Updated repair direction.
2017-11-10
Non-Product Problem Solving (PPS)
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017
Fuel Pump - Plunger and Tappet Roller Inspection and Repair
Page 24 of 24
Last Modified: 17-Nov-2017
https://qsol.cummins.com/qs3/pubsys2/xml/en/tsb/2014/tsb140019.html
11/20/2017