Cummins Isx11.9

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the CUMMINS Isx11.9.

ManufacturerKnown WMI(s)Fuel Type
CUMMINS
CUMMINS VIN Decoder

Use the box here to look up VINs from CUMMINS as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the CUMMINS Isx11.9?
     - There are 1 recall(s) for the CUMMINS Isx11.9, additional information is below.
NHTSA Mandated Recalls

  • Recall 77600 [USA]: If the inlet or outlet sections disconnect, hot exhaust gases can vent prior to exiting the tailpipe, creating the risk of combustion and a fire. if both clamps fail, there is a risk in some applications that the doc/dpf housing may detach completely, creating a road hazard.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • TSB140019 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PUMP: This document, in conjunction with the information provided within the manuals listed in table 1 provides inspection and repair guidelines following the malfunction of an xpi fuel pump pumping plunger and/or roller tappet assembly. The lev
  • TSB230019-032120 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of active fault codes fc 3232 and fc 2771. This is an update to the previously submitted communication.
  • TSB190091 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature
  • TSB190091 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature
  • TSB190091 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature
  • ATC2287A - ELECTRICAL SYSTEM: This account team coverage is being issued to authorize certified repair locations to re-calibrate the engine control module on certain isx12/isx11.9 cm2250 engines installed in certain customer vehicles that have campaign C2052 open. This
  • ATC2286A - ELECTRICAL SYSTEM: This account team coverage is being issued to authorize certified repair locations to re-calibrate the engine control module on certain isx12/isx11.9 cm2250 engines installed in certain customer vehicles that have campaign C2052 open.
  • TSB120309-031720 - ELECTRICAL SYSTEM:SOFTWARE: This technical service bulletin describes the verification and resolution of fault code 3714, 3712, 6255, and 6254 active with no other active fault codes. Due to a software issue, fault code 3714, 3712, 6255, and 6254 may become active aft
  • TSB190091-010220 - BACK OVER PREVENTION: This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature
  • TSB1900910613201 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature
  • TSB110181-052420 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of engine speed instability related to truck vacuum blower or pump engagement. Some units with transfer cases have exhibited engine speed instability when the vacuum
  • TSB120309-013120 - ENGINE AND ENGINE COOLING: This technical service bulletin describes the verification and resolution of fault code 3714, 3712, 6255, and 6254 active with no other active fault codes. Due to a software issue, fault code 3714, 3712, 6255, and 6254 may become active aft
  • TSB150133-111620 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: This techical service bulletin announces the release of new exhaust manifold gaskets and manfolds and new upper engine gasket kit part numbers to reduce instances of leaking exhaust manifold gaskets and cracked exhaust manifolds. This is a
  • TSB180095-080620 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: This technical service bulleting describes the verification and resolution of the diesel exhaust fluid (def) system becoming contaminated with debris. Def tanks are cleaned and def dosing units or intake lines areflushed or even replaced, b
  • TSB120309-061320 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This technical service bulletin describes the verification and resolution of fault code 3714 active with no other active fault codes. Due to a software issue, fault code 3714 may become active after adjusting insite? Electronic service tool
  • TSB160008-050120 - FUEL SYSTEM, GASOLINE: This technical service bulletin provides instructions for preventing the malfunction of the aftertreatment fuel injector caused by water intrusion on international prostar chassis when a new aftertreatment fuel injector is being installed.
  • TSB140019-111020 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: This document, in conjunction with the information provided within the manuals listed in table 1 provides inspection and repair guidelines following the malfunction of an xpi fuel pump pumping plunger and/or roller tappet assembly. The lev
  • TSB150089-102020 - FUEL SYSTEM, DIESEL: This technical service bulletin describes the verification and resolution of some cases in which the aftertreatment diesel exhaust fluid (def) dosing lines are not being fully purged during the purge cycle. This can result in internal crack
  • TSB140019-041020 - FUEL SYSTEM, GASOLINE: This document, in conjunction with the information provided within the manuals listed in table 1 provides inspection and repair guidelines following the malfunction of an xpi fuel pump pumping plunger and/or roller tappet assembly. The lev
  • TSB160017-031720 - EQUIPMENT:MECHANICAL: This technical service bulletin communicates the release of a new lubricating oil filter bypass valve. The oil filter bypass valve can leak, caused by improper sealing of the lubricating oil filter bypass valve plunger in the lubricating o
  • TSB101596-082415 - EQUIPMENT: This technical service bulletin introduces the required components to salvage damaged cylinder head and main bearing capscrew hole threads.
  • TSB140083-062014 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: This technical service bulletin announces the release of the service part numbers for the fuel pump head barrel and plunger and the fuel pump roller tappets.
  • TSB110181-092914 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of engine speed instability related to truck vacuum blower or pump engagement. Some units with transfer cases have exhibited engine speed instability when the vacuu
  • TSB140168-120114 - FUEL SYSTEM, OTHER: This technical service bulletin announces a new service tool fuel return hose and updated service manual procedure to decrease the occurrence of falsely identifying leaking fuel pressure relief valves.
  • TSB140169-120114 - EQUIPMENT: This technical service bulletin describes fuel lift pump obsolesence and supercession in order to address instances of fault code 2265 due to open circuits in the fuel lift pump on certain engines.
  • TSB110181-042215 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of engine speed instability related to truck vacuum blower or pump engagement. Some units with transfer cases have exhibited engine speed instability when the vacuu
  • TSB110181-042215 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of engine speed instability related to truck vacuum blower or pump engagement. Some units with transfer cases have exhibited engine speed instability when the vacuu
  • TSB150074-051915 - EQUIPMENT: This techical service bulletin announces a new turbocharger coolant leak test kit to perform turbocharger coolant leak tests.
  • C1638 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: This campaign is to replace the lubricating oil filter bypass valve on certain engines. This action supercedes previous fuel pump repair actions. The new bypass valve has improved sealing capability and provides better protection to fuel
  • TSB150061-050415 - EQUIPMENT: This technical service bulletin describes the verification and resolution of insite electronic service tool nox reset test issues.
  • TSB110181-031416 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of engine speed instability related to truck vacuum blower or pump engagement. Some units with transfer cases have exhibited engine speed instability when the vacuu
  • TSB150113-071515 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: This technical service bulletin announces a new fuel pump with a diamond-like coated tappet roller pin. The new roller pins are less susceptiblel to debris or corrosion damage, which can lead to a fuel pump failure.
  • TSB150089-060415 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: This technical service bulletin introduces a revised backflow connector for the bosch aftertreatment def (diesel exhaust fluid) dosing unit. In some cases, the aftertreatment def dosing lines are not being fully purged during the purge cyc
  • TSB150149-090815 - EQUIPMENT: This technical service bulletin explains that the aftertreatment diesel particulate filter (dpf) design was changed. Because of this physical design change, service locations questioned if the aftertreatment dpf had a manufacturing defect
  • TSB150133-092515 - ENGINE (PWS): This techical service bulletin announces the release of new exhaust manifold gaskets and manfolds and new upper engine gasket kit part numbers to reduce instances of lkeaing exhaust manifold gaskets and cracked exhaust manifolds.
  • TSB140168-092515 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This technical service bulletin announces a new service tool fuel return hose and updated service manual procedure to decrease the occurrence of falsely identifying leaking fuel pressure relief valves. This is an update to a previously sub
  • TSB150089-110315 - ENGINE (PWS): This technical service bulletin introduces a revised backflow connector for the bosch aftertreatment def (diesel exhaust fluid) dosing unit. In some cases, the aftertreatment def dosing lines are not being fully purged during the purge cyc
  • TSB120300-112812 - ENGINE (PWS): This technical service bulletin desribes the verification and resolution of a chirping noise heard from the primary belt drive on some engines. Primary belt noise, described as a chirping noise, is being heard at the water pump. The water
  • C1262 - ENGINE (PWS): This campaign improves engine and aftertreatment reliability. It authorizes certified repair locations to recalibrate the engine withh improved software.
  • TSB130155-102213 - ELECTRICAL SYSTEM: This technical service bulletin raises field awareness and describes corrective action for peterbilt 320, 386, 587 and medium duty chassis battery box harness isssues. Damage to components within the battery box has resulted in heated def
  • TSB150133-070116 - ENGINE (PWS): This techical service bulletin announces the release of new exhaust manifold gaskets and manfolds and new upper engine gasket kit part numbers to reduce instances of lkeaing exhaust manifold gaskets and cracked exhaust manifolds. This is a
  • TSB100890-012813 - ENGINE (PWS): This technical service bulletin announces the release of a crankcase breather heater, insulation, and related parts of the external crankcase breather system on the affected engines. The heater and insulation are designed to reduce the pos
  • TSB130155-020314 - ENGINE (PWS): This technical service bulletin raises field awareness and describes corrective action for peterbilt 320, 386, 587 and medium duty chassis battery box harness isssues. Damage to components within the battery box has resulted in heated def
  • TSB140038-040614 - ENGINE (PWS): This technical service bulletin describes the verification and resolution of inlet and outlet nox sensor wire lead damage caused by the use of incorrect wire ties.
  • TSB140046-041514 - ENGINE (PWS): This technical service bulletin introduces the release of a revised air compressor repair kit for cummins air compressors. The revised kit provides the necessary parts to repair the air compressor by replacing the compressor head assembly.
  • C1437B - ELECTRICAL SYSTEM: This campaign was issues to improve engine and aftertreatment reliability. It provides authorization for certified repair locations to recalibrate the engine with improved software.
  • C1728A - ENGINE (PWS): This campaign is being issued to address certain isx11.9 cm2250/cm2350 rear ptos (repto) that were mis-assembled at the plant. This is an updated version of a previously released communication.
  • C1728 - ENGINE (PWS): This campaign is being issued to address certain isx11.9 cm2250/cm2350 rear ptos (repto) that were mis-assembled at the plant.
  • C1728A - EQUIPMENT: This campaign is being issued to address certain isx11.9 cm2250/cm2350 rear ptos (repto) that were mis-assembled at the plant. This is an updated version of a previously released communication.
  • TSB160017-021616 - ENGINE (PWS): This technical service bulletin communicates the release of a new lubricating oil filter bypass valve. The oil filter bypass valve can leak, caused by improper sealing of the lubricating oil filter bypass valve plunger in the lubricating o
  • TSB150089-020516 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: This technical service bulletin introduces a revised backflow connector for the bosch aftertreatment def (diesel exhaust fluid) dosing unit. In some cases, the aftertreatment def dosing lines are not being fully purged during the purge cyc
  • TSB160024-030916 - ENGINE (PWS): This technical service bulletin describes the trouble shooting and repair steps to address lubricating oil pressure and low idle and fault code 143 in certain engines due to the small diameter of a remote mounted lubricating oil filter head
  • TSB160017-021616 - EQUIPMENT: This technical service bulletin communicates the release of a new lubricating oil filter bypass valve. The oil filter bypass valve can leak, caused by improper sealing of the lubricating oil filter bypass valve plunger in the lubricating o
  • TSB150089-020516 - EQUIPMENT: This technical service bulletin introduces a revised backflow connector for the bosch aftertreatment def (diesel exhaust fluid) dosing unit. In some cases, the aftertreatment def dosing lines are not being fully purged during the purge cyc
  • TSB-150003 - ENGINE (PWS): Cummins: information regarding the change and shape of engine brake where the engine brake solenoids have changed and location due to engine standardized brake design across isx12 and isx12 g models. Isx12 c. N years listed. *
  • TRP-1359-B - ENGINE (PWS): Cummins: in order for entire engine to be replaced, for failure of cam bushing, cylinder block must show signs of discolored/heat paint in area of number one and covered in base engine warranty. *pe
  • TSB-100890 - ENGINE (PWS): Cummins: freezing may occur, in certain cold weather evironments and operating conditions, due to condensation in breather system affecting heavy duty applications that have external crankcase breather systems. Models ism cm876, isx cm871
  • TSB-120001 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: Cummins: a new designed oil fill cap, for engines, to prevent loss of seal and provide positive stop for fill cap when installed on oil fill neck. *pe
  • TSB-110266 - ENGINE AND ENGINE COOLING:ENGINE: Cummins: bulletin providing information regarding replacement of old fan drive idler pulley bracket and hardware with new updated version of idler pulley bracket. *pe
  • TSB-110226 - FUEL SYSTEM, OTHER:STORAGE: Cummins: low oil pressure or excessive fuel consumption should be resolved with the lowering of oil level. *pe
  • TSB-110181 - ENGINE AND ENGINE COOLING:ENGINE: Cummins: engine speed instability when the vacuum blower is engaged. Software problem. *rm updated 12/16/15. *pe
  • TSB-110078 - ENGINE AND ENGINE COOLING: Cummins: there are fault codes stored due to an ambient air temp sensor problem. *rm

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.