TSB1900910613201

Service Bulletin Details

Public Details for: TSB1900910613201

This technical service bulletin describes the verification and resolution of fault codes 125, 222, 2191, 2973 and/or low power, white smoke, engine misfire, aftertreatment performance complaints as caused by incorrect pressure/ temperature


- 9999 -

Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
Page 1 of 5
Technical Service Bulletin
Technical Service Bulletin:
Released Date: 13-Jun-2019
TSB190091
Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
Incorrect Pressure/Temperature Sensor: Fault
Code 125, 222, 2191, 2973
Warranty Statement
The information in this document has no effect on present warranty coverage or repair
practices, nor does it authorize TRP or Campaign actions.
Contents
Product Affected
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B6.7 CM2350 B121B
ISB6.7 CM2150 (EPA 2007)
ISB6.7 CM2250 (EPA 2010)
ISB6.7 CM2350 B101
ISC CM2150
ISC CM2250
ISL CM2150
ISL CM2250
ISL CM2350 L101
ISM CM876
ISX11.9/12 CM2250
ISX12 CM2350 X102
ISX15 CM2250
ISX15 CM2350 X101
ISX15 CM871
L9 CM2350 L116B
L9 CM2350 L119B
QSB6.7 CM2250
QSB6.7 CM2350 B105
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190091.html
6/14/2019
Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
•
•
•
•
•
•
•
Page 2 of 5
QSL9 CM2250
QSL9 CM2350 L102
QSX15 CM2250
QSX15 CM2350 X105
X12 CM2350 X119B
X15 CM2350 X114B
X15 CM2350 X116B
Issue
Symptom:
•
•
•
•
•
Fault Codes 125, 222, 2191, 2973
Low power
White smoke
Engine misfire
Aftertreatment performance complaints
Root Cause:
• Incorrect pressure/temperature sensor installed in the incorrect location on the
engine.
Verification
• Remove the pressure/temperature sensor in question and verify
pressure/temperature sensor part number.
• View pressure/temperature sensor values in a key on engine off condition using
INSITE® electronic service tool or equivalent, an incorrect pressure/temperature
sensor can give an incorrect value.
• At key ON engine off, the barometric air pressure should read the local barometric
air pressure, and the intake manifold pressure should read 0.0 in-hg.
Resolution
Refer to QuickServe Online parts catalog on to determine the correct sensor to use in the
correct location for a given engine.
Install correct pressure/temperature sensor. See Table 1 below for part numbers.
Table 1, Sensor Part Number and Application
Part Number
Pressure Sensing
Rangemm- hg
[ in-hg ]
Application
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190091.html
Alternate Part
Numbers
6/14/2019
Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
Page 3 of 5
Table 1, Sensor Part Number and Application
Pressure Sensing
Rangemm- hg
[ in-hg ]
Application
Alternate Part
Numbers
2897332
330 mm-hg [ 13 inhg ] to 838 mm-hg
[ 33 in-hg ]
Barometric air
pressure and/or
turbocharger
compressor intake
pressure
4921850
2897333
330 mm-hg [ 13 inhg ] to 1574.8 mmhg [ 62 in-hg ]
Intake manifold
pressure on 6.7L or
smaller engines
4921322
2897334
330 mm-hg [ 13 inhg ] to 3810 mm-hg
[ 150 in-hg ]
Intake manifold
pressure on 8.3L or
larger engines
4921324, 2872784
Part Number
Part Identification
• Pressure/temperature sensor part number is located on underside of
pressure/temperature sensor body.
• Pressure/temperature sensor must be removed to verify part number. See Figure 1
for part number location. See Figure 2 for pressure/temperature sensor similarity
examples.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190091.html
6/14/2019
Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
Page 4 of 5
Figure 1, Pressure/Temperature Sensor Part Number Location.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190091.html
6/14/2019
Incorrect Pressure/Temperature Sensor: Fault Code 125, 222, 2191, 2973
Page 5 of 5
Figure 2, Pressure/Temperature Sensor Similarity Example.
Document History
Date
2019-6-5
Details
Module Created
Last Modified: 13-Jun-2019
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190091.html
6/14/2019


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.