MY 2018 Audi Tec

2018
Pre-Delivery Inspection
Technician Reference Document
Effective 7-6-2017-US
Version 1.5
Table of Contents
Technician Reference Document
Technician Reference Document Overview
The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with
the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more
efficient, and in doing so, this document has been created to be used as a reference for checklist items that
may have additional information. On the PDI Checklist, you find that certain items have been notated with an
asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference
Document.
Below you will find a list of each model, with the page numbers to their left. After navigating to the desired
page, you will notice each model page is formatted similarly to the PDI Checklists. After each section title is the
original checklist item, followed by any additional information specific to that model.
Table of Contents
3-4
A3/S3 Sedan & Cabriolet/RS 3
5-6
A3 e-tron Sportback
7-8
A4/S4/A4 allroad
9-10
A5/S5
11-12
A6/S6
13-15
A7/S7/RS 7/RS 7 performance
16-17
A8 L/S8 plus
18-19
Q3
20-21
Q5/SQ5
22-24
Q7
25-26
R8
27-28
TT/TTS/TTRS
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 2
A3/S3 Sedan & Cabriolet/RS 3
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Inspect mirrors for proper operation
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Using ODIS, right click the 5F-Information control unit 1,
and select “Guided Functions > 5F-Adaptations > Storage of
music activating/deactivating (option 2) and when prompted
for the Optical drive, choose option 1 for “On”
•      Set service reminder
via Special functions > PDI service > 17-PDI-resetting SRI at
PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure (Sedan only)
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set time source setting to “GPS” and set auto daylight
savings time to “on.”*
Change time zone appropriate to dealer location
•      Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance >
Parking Aid”
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance Settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select OffMedia / Radio / SAT
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 3
A3/S3 Sedan & Cabriolet/RS 3
Technician Reference Document
Audi connect® (USA ONLY) (if equipped)
Driver Assistance
•      Verify Audi connect® Information Packet is present (if
equipped)
•      Verify operation of parking system (if equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot” )
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot” )
•      Enable Google Earth (if equipped)
Enable Google Earth in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis > Special functions > PDI Service. Select
option 2, the battery test for new batteries as part of the
Pre-Delivery Inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless server)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 4
A3 e-tron Sportback
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Check operation of window, lock, and seat controls
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list –> 5F –>
Guided Functions –> 5F Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
•      Set service reminder
via Special functions > PDI service > 17-PDI-resetting SRI at
PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation*
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set time source setting to “GPS” and set auto daylight
savings time to “on.”*
Change time zone appropriate to dealer location
•      Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
•      Verify speech dialogue system is operating
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “ Menu > Vehicle > Left Option > Drive Assistance > Parking Aid”
•      Set dealership location in navigation (if equipped)
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance Settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
Interior
This can be found in the Radio/Settings Menu
•      Verify operation of all seat belts and latches*
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 5
A3 e-tron Sportback
Technician Reference Document
Audi connect® (USA ONLY) (if equipped)
Driver Assistance
•      Verify Audi connect® Information Packet is present
•      Verify operation of parking system (if equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot” )
•      Verify system connects to mobile network (if equipped)
Review TSB 2042942 for additional information
Make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
•      Enable Google Earth (if equipped)
Enable Google Earth in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Hybrid Technology
•      Verify EV button is operating
Push the EV button at a speed below 80 mph and check for
lights on EV button and instrument cluster. Cycle through
the different EV modes: EV, Hybrid, Hold Battery, and Charge
Battery. These settings can be accessed through the MMI
via MENU > Car > Car systems > Charging & e-tron > e-tron
mode. EV mode may or may not activate based on current
operational criteria as described in the owner’s manual
•      Verify charging while braking in recuperation range
See power meter for details. Will only recuperate if battery is
not fully charged
•      Check MMI and instrument cluster for proper operation
mode indication (only shows in MMI if equipped with NAV)
Verify green arrows while EV or electrical drive, orange
while combustion engine active, etc. Only shows in MMI if
equipped with NAV
•      Verify front charge port is operational
Plug in charger and verify that it is operational and charges
the vehicle
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis > Special functions > PDI Service. Select
option 2, the battery test for new batteries as part of the
Pre-Delivery Inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless server)
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 6
A4/S4/A4 allroad
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Inspect mirrors for proper operation
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Using ODIS, right click the 5F-Information control unit 1, and
select Guided Functions > 5f-Adaptations > Storage of music
activating/deactivating (option 2) and when prompted for
the Optical drive, choose option 1 for “On”
•      Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 7-6-2017-US
Version 1.5
Inspect folding, adjustments, right side tilt in reverse, heating
•      Check rear view mirror operation
Check self-dimming function/lighting
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance > Parking Aid”
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Model Year 2018 | Audi Pre-Delivery Reference Document | 7
A4/S4/A4 allroad
Technician Reference Document
Audi connect® (USA ONLY) (if equipped)
Driver Assistance
•      Verify Audi connect® Information Packet is present (if
equipped)
•      Verify operation of parking system (if equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Check Wi-Fi® hotspot Visibility. No data available at PDI (if
equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI__XXXX,” where XXXX
is the last four digits of VIN. Via Telephone > Options > Wi-Fi®
options > Wi-Fi® Mode “Hotspot” > Hotspot settings > Access
point (SSID)
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-up display (as
equipped)
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 8
A5/S5
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Inspect mirrors for proper operation
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions –> Service
work –> : 5F–Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
•      Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via Menu > Vehicle > Driver Assistance > Parking Aid
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual->Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 9
A5/S5
Technician Reference Document
Audi connect® (USA ONLY) (if equipped)
Driver Assistance
•      Verify Audi connect® Information Packet is present (if
equipped)
•      Verify operation of parking system (if equipped)
Verify Audi connect® Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
•      Check Wi-Fi® hotspot functionality
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits of VIN that are automatically preset in the system
Convertible Functionality (if equipped)
•      Test operation of power folding top
Perform with engine running to conserve battery power
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> PDI Service. Select option 2, the battery
test for new batteries as part of the pre–delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
•      Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 10
A6/S6
Technician Reference Document
Vehicle Preparation
Interior
•      Deactivate vehicle transport mode
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats and child safety features
This step must be performed with the engine off, and ignition on
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Deactivate air suspension loading mode (if equipped)
via Special Functions -> Service Work -> 34-Loading mode
activating/deactivating Warning! Car body may lower!
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list –> 5F –>
Guided Functions –> 5F Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
•      Verify proper operation of climate control*
Ensure proper heating and A/C cooling, open all panel vents
for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance Settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 11
A6/S6
Technician Reference Document
Audi connect® (USA ONLY) (if equipped)
Driving Performance
•      Connect the dealer demo SIM card to verify system
connects to mobile network
•      Verify engine Start-Stop System functionality
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
•      Verify Audi connect® Information Packet is present (if
equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot” )
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI_XXXX”, where XXXX
is the last four digits of the VIN. Via Telephone > Options >
Wi-Fi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings
> Access point (SSID)
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up Display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
•      Enable Google EarthTM (if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom righthand corner of the MMI screen Q3/A8 -Enable Google EarthTM
in the navigation settings and verify the white Google Logo
appears next to the 2G or 3G symbol
On-Hoist Inspection
•      Install wheel bolt covers
Wheel bolt covers can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 12
A7/S7/RS 7/ RS 7 performance
Technician Reference Document
Vehicle Preparation
Trunk Inspection (continued)
•      Deactivate vehicle transport mode
•      Check battery clamps for proper torque
This step must be performed with the engine off, and ignition on
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Deactivate air suspension loading mode (if equipped)
via Special Functions -> Service Work -> 34-Loading mode
activating/deactivating Warning! Car body may lower!
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list –> 5F –>
Guided Functions –> 5F Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Refer to Elsa Pro for specification
Interior
•      Verify operation of all seat belts and latches
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
•      Verify proper operation of climate control*
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
•      Check all doors for proper power closing (if equipped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
Ensure proper heating and A/C cooling, open all panel vents
for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 13
A7/S7/RS 7/ RS 7 performance
Technician Reference Document
Settings (continued)
On-Hoist Inspection
•      Set dealership location in navigation (if equipped)
•      Install wheel bolt covers and center caps as supplied
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance Settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
•      Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
•      Verify Audi connect® Information Packet is present (if
equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot” )
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI_XXXX”, where XXXX
is the last four digits of the VIN. Via Telephone > Options >
Wi-Fi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings
> Access point (SSID)
•      Enable Google EarthTM (if equipped)
Wheel bolt covers can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom righthand corner of the MMI screen Q3/A8 -Enable Google EarthTM
in the navigation settings and verify the white Google Logo
appears next to the 2G or 3G symbol
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 14
A7/S7/RS 7/ RS 7 performance
Technician Reference Document
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 15
A8 L/S8 plus
Technician Reference Document
Vehicle Preparation
Interior
•      Deactivate vehicle transport mode
This step must be performed with the engine off, and ignition on
•      Verify operation of all seat belts and latches
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Deactivate air suspension loading mode (if equipped)
via Special Functions -> Service Work -> 34-Loading mode
activating/deactivating Warning! Car body may lower!
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list –> 5F –>
Guided Functions –> 5F Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
•      Check all doors for proper power closing (if equipped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Effective 7-6-2017-US
Version 1.5
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
•      Verify proper operation of climate control*
Ensure proper heating and A/C cooling, open all panel vents
for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance Settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual > Select Off
Model Year 2018 | Audi Pre-Delivery Reference Document | 16
A8 L/S8 plus
Technician Reference Document
Media / Radio / SAT
Driving Performance
•      Verify HD Radio is turned “off”
•      Verify engine Start-Stop System functionality
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
•      Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
•      Verify Audi connect® Information Packet is present (if
equipped)
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
•      Check Wi-Fi® hotspot functionality (if equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits of VIN that are automatically preset in the system
•      Enable Google Earth
TM
(if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom righthand corner of the MMI screen Q3/A8 -Enable Google EarthTM
in the navigation settings and verify the white Google Logo
appears next to the 2G or 3G symbol
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 17
Q3
Technician Reference Document
Vehicle Preparation
Trunk Inspection (continued)
•      Deactivate vehicle transport mode
•      Set spare tire pressure
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )
•      Deactivate air suspension loading mode (if equipped)
via Special Functions > Service Work > 34-Loading mode
activating/deactivating Warning! Car body may lower!
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions > Service work
> 5F-Activating/deactivating storage of music). Also referred
to as CD Ripping. Perform 3 button reset of the MMI to
complete the activation. Refer to the owner’s manual for
model-specific button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Verify power tailgate is operational and set default opening
height
Adjust the trunk lid opening height to 77.7 inches (197 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height
•      Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
Effective 7-6-2017-US
Version 1.5
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.” (if equipped)
Change time zone appropriate to the dealer location
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “ Menu > Vehicle > Left Option > Drive Assistance > Parking Aid”
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Model Year 2018 | Audi Pre-Delivery Reference Document | 18
Q3
Technician Reference Document
Media / Radio / SAT
Driver Assistance
•      Verify HD Radio is turned “off” (if equipped)
•      Verify operation of parking system
This can be found in the Radio/Settings Menu
Verify operation of Audi parking system sensors with rear
view camera
Audi connect® (USA ONLY) (if equipped)
•      Verify Audi connect® Information Packet is present (if
equipped)
Verify Audi connect® Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the Wi-Fi® hotspot is turned on (TEL function button
> Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Check Wi-Fi® hotspot functionality (if equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits of VIN that are automatically preset in the system
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> PDI Service. Select option 2, the battery
test for new batteries as part of the pre–delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
•      Enable Google EarthTM (if equipped)
Enable Google EarthTM in the navigation settings and verify
the white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR
stock inventory vehicle. See separate “2018 Normal Load
Condition Tire Pressure Table” posted on ServiceNet
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 19
Q5/SQ5
Technician Reference Document
Vehicle Preparation
Trunk Inspection
•      Deactivate vehicle transport mode
•      Verify power tailgate is operational and set default opening
height
Deactivate vehicle transport mode (via Special functions >
Service work > 19-Transport mode activating/deactivating)
•      Deactivate air suspension loading mode (if equipped)
via Special Functions -> Service Work -> 34-Loading mode
activating/deactivating Warning! Car body may lower!
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions > Service work
> 5F-Activating/deactivating storage of music). Also referred
to as CD Ripping. Perform 3 button reset of the MMI to
complete the activation. Refer to the owner’s manual for
model-specific button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc.
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
•      Prepare the base bars for customer delivery (install bars
only upon customer request)
Install the rubber strips to the top of the base carrier bars
(do not install the carrier bars on the vehicle unless customer
has requested). Repackage the bars into the box if they are
not being installed on the vehicle. Retrieve the paper with
the torque wrench key code from the base carrier bar box.
Insert the paper with the key code into the owner’s literature
wallet. Record torque wrench key code in the VDF to ensure
it’s documented in the event the paper with the code is
misplaced
Adjust the trunk lid opening height to 77.7 inches (197 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height
•      Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Lighting and Windshield
Settings
•      Test front washers (and headlight washers if equipped)
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Headlights must be on to test functionality of the headlight
washers
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 20
Q5/SQ5
Technician Reference Document
Settings (continued)
Driving Performance
•      Set “Entertain. Fad.” in Parking aid to an audible level
•      Verify engine Start-Stop System functionality
Via “ Menu > Vehicle > Left Option > Drive Assistance > Parking Aid”
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual->Select Off
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
•      Verify Audi connect® Information Packet is present
Verify Audi connect® Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX”, where XXXXX = the last five digits of VIN that are automatically preset in the system
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR
stock inventory vehicle (See separate “2018 Normal Load
Condition Tire Pressure Table” posted on ServiceNet)
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> PDI Service. Select option 2, the battery
test for new batteries as part of the pre–delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 21
Q7
Technician Reference Document
Vehicle Preparation
Trunk Inspection
•      Deactivate vehicle transport mode
•      Verify power tailgate is operational and set default opening
height (if equipped)
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions > Service work
> 5F-Activating/deactivating storage of music). Also referred
to as CD Ripping. Perform 3 button reset of the MMI to
complete the activation. Refer to the owner’s manual for
model-specific button sequence
•      Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
•      Check all doors for proper power closing (if equipped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
•      Prepare the base bars for customer delivery (install bars
only upon customer request)
Install the rubber strips to the top of the base carrier bars
(do not install the carrier bars on the vehicle unless customer
has requested). Repackage the bars into the box if they are
not being installed on the vehicle. Retrieve the paper with
the torque wrench key code from the base carrier bar box.
Insert the paper with the key code into the owner’s literature
wallet. Record torque wrench key code in the VDF to ensure
it’s documented in the event the paper with the code is
misplaced
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Effective 7-6-2017-US
Version 1.5
Adjust the trunk lid opening height to 75 inches (190 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height. Verify operation of handsfree release (if equipped)
•      Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped) and child safety features
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
•      Verify operation of manual folding 2nd row and power
folding 3rd row seats
Controls for the power folding 3rd row are located in the
trunk
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
•      Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Model Year 2018 | Audi Pre-Delivery Reference Document | 22
Q7
Technician Reference Document
Settings
Audi connect® (USA ONLY) (if equipped) continued)
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Setup/Settings menu
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX”, where XXXXX = the last five digits of VIN that are automatically preset in the system
•      Enable Google EarthTM (if equipped)
Enable Google EarthTM in the navigation settings and verify
the white Google Logo appears next to the 2G or 3G symbol
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “ Menu > Vehicle > Left Option > Drive Assistance > Parking Aid”
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual >Select Off
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR
stock inventory vehicle (See separate “2018 Normal Load
Condition Tire Pressure Table” posted on ServiceNet)
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Media / Radio / SAT
Driving Performance
•      Verify HD Radio is turned “off”
•      Verify engine Start-Stop System functionality
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
•      Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
•      Verify Audi connect® Information Packet is present
Verify Audi connect® Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
•      Turn on the Wi-Fi® Hotspot (if equipped)
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
•      Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 23
Q7
Technician Reference Document
Driver Assistance (continued)
•      Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> PDI Service. Select option 2, the battery
test for new batteries as part of the pre–delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 24
R8 Coupe/R8 Spyder
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Inspect mirrors for proper operation
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)
Using ODIS, right click the 5F-Information control unit 1, and
select Guided Functions > 5f-Adaptations > Storage of music
activating/deactivating (option 2) and when prompted for
the Optical drive, choose option 1 for “On”
•      Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Lighting and Windshield
•      Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
•      Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 7-6-2017-US
Version 1.5
Inspect folding, adjustments, right side tilt in reverse, heating
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
•      Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance > Parking Aid”
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
•      Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
Model Year 2018 | Audi Pre-Delivery Reference Document | 25
R8 Coupe/R8 Spyder
Technician Reference Document
Audi connect® (USA ONLY) (if equipped) (continued)
Driving Performance (continued)
•      Verify Audi connect® Information Packet is present (if
equipped)
•      Calibrate rear view mirror
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
•      Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI__XXXX,” where XXXX
is the last four digits of VIN. Via Telephone > Options > WiFi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings >
Access point (SSID)
•      Enable Google EarthTM (if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Convertible Functionality (if equipped)
•      Test operation of power folding top
Perform with engine running to conserve battery power
Post-Road Test Inspection
•      Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 26
TT Coupe & Roadster/TTS/TT RS
Technician Reference Document
Vehicle Preparation
Interior (continued)
•      Deactivate vehicle transport mode
•      Verify proper operation of climate control
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
•      Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Using ODIS, right click the 5F-Information control unit 1, and
select Guided Functions > 5f-Adaptations > Storage of music
activating/deactivating (option 2) and when prompted for
the Optical drive, choose option 1 for “On”
•      Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
•      Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
•      Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Trunk Inspection
•      Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
•      Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet under Pre-Delivery Inspection
•      Check battery clamps for proper torque
Refer to Elsa Pro for specification
Ensure proper heating and A/C cooling and open all panel
vents for all zones
•      Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
Settings
•      Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
•      Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
•      Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
•      Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance > Parking Aid”
•      Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
•      Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
•      Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual->Select Off
Media / Radio / SAT
•      Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Interior
Audi connect® (USA ONLY) (if equipped)
•      Check operation of window, lock, and seat controls
•      Verify Audi connect® Information Packet is present (if
equipped)
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
•      Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
•      Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
Effective 7-6-2017-US
Version 1.5
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
•      Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
Model Year 2018 | Audi Pre-Delivery Reference Document | 27
TT Coupe & Roadster/TTS/TT RS
Technician Reference Document
Audi connect® (USA ONLY) (if equipped) (continued)
Post-Road Test Inspection
•      Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
•      Perform a battery test
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI__XXXX,” where XXXX
is the last four digits of VIN. Via Telephone > Options > WiFi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings >
Access point (SSID)
•      Enable Google EarthTM (if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
•      Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
•      Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
•      Inspect wheel bolts for proper torque
Use torque wrench to verify
•      Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
•      Verify engine performance and acceleration
Listen for abnormal noise/vibrations
•      Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
Driver Assistance
•      Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Convertible Functionality (if equipped)
•      Test operation of power folding top
Perform with engine running to conserve battery power
Effective 7-6-2017-US
Version 1.5
Model Year 2018 | Audi Pre-Delivery Reference Document | 28