TT 191701

Service Bulletin Details

Public Details for: TT 191701

Component replacement recommendation to address dtcs P102A and P0128


- 2013 - 2012 - 2011 -

Technical Tips
Technical Tip
Topic
19-17-01TT – MIL ON with Over Temperature DTC’S P102A, P0128
Market area
United States 444 Volkswagen of America, Inc. (6444)
Brand
Volkswagen
Date
July 21, 2017
Condition
ATTENTION:
THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN AS TITLED.
TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING.
MIL ON with Over Temperature DTC’S P102A, P0128
Model(s)
Year
Touareg
2011-2013
Eng. Code
Trans. Code
VIN Range From
VIN Range To
All
All
All
3.0L TDI
CATA/CNRB
Technical Background
Engine overheats within the first 10 minutes of the starting the vehicle, and then the temperature will go back to
normal range. Fault codes P102A or P0128 are stored in the ECM and the vehicle will have no heat. This is a result of
a sticking -N82- Coolant Shut-Off Valve (solenoid valve) located in the left inner wheel well area behind the front
wheel housing liner (for heating controls). See wiring diagrams, component locations, vehicle front in Elsa.
Service
Replace the -N82- coolant shut-off valve.
Additional Information
Revision History
Revision Number
Released Date
2048453/1
7/21/17
Reason For Update
Original publication.
© 2017 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on
the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.