K40341485

Service Bulletin Details

Public Details for: K40341485

Diagnostic trouble code ( dtc ) P208A logging intermittently - obd15, obd16 emissions; commonly model year ( my ) 2016, 2017 chassis.Updated to reflect release of fsb284-064 (above)


- 2017 - 2016 -

Solution K40341485
Tuesday, February 6, 2018 8:56:57 PM CET
Solution
Diagnostic Trouble Code ( DTC ) P208A Logging Intermittently - OBD15, OBD16
Title (customer effect)
Emissions; Commonly Model Year ( MY ) 2016, 2017 Chassis
Diagnostic Trouble Code ( DTC ) P208A Reductant Pump "A" Control may log
Cause
intermittently on OBD15 and OBD16 Emissions (Model Year 2016, 2017) chassis,
commonly during an engine cold start.
Solution
DTC P208A-00 may be setting due to a software issue.
If there are no other faults or symptoms present do not proceed with GD or change any
parts.
Verify the chassis emissions level.
• Details can be found in the Product Details box on the Product tab in PTT as seen below:
For OBD16 Emissions Chassis ( Commonly Model Year 2017 ):
• Software has been released to correct an issue with voltage threshold
• Update the ACM software to the current version
• Refer to Tech Tip TT-001-2016 and check the other recommended items
• Perform a short test drive to ensure there are no further issues
For OBD15 Emissions Chassis ( Commonly Model Year 2016 ):
• Software improvements have been released to address this code. If P208A
is present, software should be checked and updated as necessary.
• Two modules are affected by this update and should be reprogrammed in the following
order:
1. Engine Control Module ( EMS )
2. Aftertreatment Control Module ( ACM )
• If there are other codes and symtoms present or the code returns following the software
update, normal diagnostic procedures should be followed to determine the issue.
Solution visibility
Dealer distribution
Function(s)/component(s) affected
Function affected
DEF Dosing , SCR , battery/power supply , low voltage disconnect , 2 1 0 ACM , Dia
gnostic tool
Function Group
Function Group
254 catalytic converter; exhaust emission control equipment , 258 emissions aftertreatment , 284 control system, fuel supply
Customer effect
Main customer effect
regeneration , power supply , calibration/programming/pairing/missing operation , diag
nostics/methodology , efficiency/abnormal behavior , fault code/display
Fluid problem
priming/loss of prime
Fluid implicated
AdBlue
Lights/Messages on
Driver's information warning pictogram , - - - - , - - / - -
information display
Fault code(s)
OBD 2013 Diagnostic
Trouble Codes
P208A
Conditions
Vehicle operating mode
Frequency of occurrence of
problem
on start-up , when driving , when stationary
random
Administration
Author
RU4469V
Dealer ID
RU4469V
Last modified by
RU4469V
Creation date
26-10-2017 21:10
Date of last update
10-01-2018 19:01
Review date
01-01-2018 00:01
Status
Published
Average score
4
Number of scores
1
NA_MACK_Vehicle_Range
NA_MACK_Vehicle_Ran
ge
Conventional , CHU , CXU , GU , TD
NA_VOLVO_Vehicle_Range
NA_VOLVO_Vehicle_Ra
nge
Conventional , VNX , VNL , VNM , VHD , VAH
Engine family
Engine family
11L Engine , 13L Engine , 16L Engine , MP7 , MP8 , MP10
Emission Standard
Emission Standard
US16 , US15


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.